13.340.20 头部防护设备 标准查询与下载

ASTM F2178/F2178M-23 电弧额定眼睛或面部防护产品的标准规范

1.1 This product specification is used to determine the arc rating and specify the requirements for products intended for use as eye or face protection for workers exposed to electric arcs. The arc rating is determined in the test with an arc which has a heat flux value of 2100 kW/m2 [50 cal/cm2 /s]. Products are tested as sold. 1.2 The products covered by this standard are in the form of faceshields attached to the head by protective helmets (hard hats), headgear, hood assemblies, safety spectacles or goggles. Faceshields, safety spectacles or goggles are tested with or without other face and head protective products, for example, sock hoods, balaclavas, sweat shirt hoods or jacket hoods. 1.2.1 Fabric layers used in the design of face protection products such as in hood, neck guards, balaclava, meet the requirements of Specification F1506. When fabrics are designed into the protection provided for eye or face protective products, the arc rating of fabric system is first determined by Test Method F1959/F1959M. 1.2.2 The arc rating of the eye or face protective product which requires fabric to provide protection to the face or head will not be higher than the lower arc rating of either the fabric system or the shield/visor assembly. 1.3 The values stated in SI units shall be regarded as standard except as noted. Within the text, alternate units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, alternate systems must be used independently of the other. Combining values from the systems described in the text may result in nonconformance with the method. 1.4 This standard does not purport to describe or appraise the effect of the electric arc fragmentation or propulsion of parts of equipment or molten metal splatter, deposited from the pressure wave containing molten metals and possible fragments of other materials except to the extent that heat energy transmission due to these arc explosion phenomena is reduced by test specimens. 1.5 This standard shall not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazards see Section 11. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Arc Rated Eye or Face Protective Products

KS G ISO 18526-1-2023 眼睛和面部保护.试验方法.第1部分:几何光学特性

Eye and face protection — Test methods — Part 1: Geometrical optical properties

KS G ISO 18526-2-2023 眼睛和面部保护.试验方法.第2部分:物理光学特性

Eye and face protection — Test methods — Part 2: Physical optical properties

KS G ISO 18526-3-2023 眼睛和面部保护.试验方法.第3部分:物理和机械性能

Eye and face protection — Test methods — Part 3: Physical and mechanical properties

KS G ISO 12312-2-2023 眼睛和面部防护.太阳镜和相关眼镜.第2部分:直接观察太阳的滤光器

Eye and face protection — Sunglasses and related eyewear — Part 2: Filters for direct observation of the sun

23/30455540 DC BS EN 17950 防护头盔 测试方法 减震 包括测量旋转运动学

BS EN 17950. Protective helmets. Test methods. Shock absorption including measuring rotational kinematics

23/30453526 DC BS EN 1078 骑自行车者的头盔

BS EN 1078. Helmets for cyclists

ASTM E3343/E3343M-23 执法和矫正人员佩戴的非防弹头盔的试验方法

1.1 This standard provides nonballistic test methods and conditioning procedures for assessing head protection (that is, helmet and face shield) worn by law enforcement and corrections officers. 1.1.1 Conditioning procedures are included to assess durability in terms of resistance to chemicals and cleaning products, extreme temperatures, weathering, and absorption of liquids. 1.1.2 Test methods are included to assess the protective performance against hazards including impact/bump, projectiles (other than bullets), flame, and liquids. 1.1.3 Test methods are included to assess safety and ergonomic aspects of retention system strength, stability of the helmet on the wearer’s head, corrosion resistance, and face shield visual acuity, field of view, scratch resistance, and anti-mist properties. NOTE 1—These test methods reference published standards from ASTM International and other standards developing organizations. Appendix X1 contains a summary of test methods included in this standard, along with the source and purpose for each. 1.2 These test methods do not address eye protection other than face shields that are attached to the helmet. 1.3 It is anticipated that these test methods will be referenced by suppliers, certifiers, purchasers, or other users to meet their specific needs. Those users will specify, in other standards and specifications, which test methods and conditioning procedures are applicable and will specify any performance categories or levels. 1.3.1 If there is a discrepancy between these test methods and a user-supplied document, the user-supplied document shall take precedence. 1.4 In these test methods, “other standards and specifications” and “unless specified elsewhere” refer to documents (for example, military standards, purchase specifications) that require the use of these test methods. Purchasers and other users are responsible for the “other standards and specifications” and for specifying any requirements that supersede those of these test methods. 1.5 Units—The values stated in either SI units or inchpound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Test Methods for Nonballistic-resistant Helmets Worn by Law Enforcement and Corrections

23/30464477 DC BS EN ISO 16321-1 AMD 1. 职业用途眼部和面部防护 第 1 部分：一般要求

BS EN ISO 16321-1 AMD 1. Eye and face protection for occupational use - Part 1. General requirements

ASTM F1163-23 马运动和骑马用防护头盔的标准规范

1.1 This specification covers minimum performance criteria and describes test methods for protective headgear for use in horse sports and horseback riding. 1.2 It is not the intention of this specification to bar from consideration materials of improved quality or performance not known at the time of development of this specification. 1.3 All testing and requirements of this specification shall be in accordance with Test Methods F1446, except where noted herein. 1.4 The values stated in SI units are to be regarded as the standard. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Protective Headgear Used in Horse Sports and Horseback Riding

KS P ISO 19818-1-2022 眼睛和面部防护.激光辐射防护.第1部分:要求和试验方法

Eye and face protection — Protection against laser radiation — Part 1: Requirements and test methods

KS K ISO 18639-5-2022 从事特定救援活动的消防员个人防护装备.第5部分:头盔

PPE ensembles for firefighters undertaking specific rescue activities — Part 5: Helmet

KS K ISO 18639-5:2022 从事特定救援活动的消防员个人防护装备.第5部分:头盔

PPE ensembles for firefighters undertaking specific rescue activities — Part 5: Helmet

T/ZZB 2880-2022 一次性使用医用隔离眼罩

本文件规定了一次性使用隔离眼罩的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输与贮存及质量承诺。 本文件适用于以PVC、 PC为主要原材料制成的一次性使用医用隔离眼罩。

Disposable medical isolation eye mask

ASTM F3137-15(2022) 女子长曲棍球（守门员除外）用头套标准规范

1.1 This specification defines performance requirements for headgear to be used by field player’s participating in the sport of women’s lacrosse. The technical requirements in this specification do not address the administrative requirements of lacrosse governing bodies, so it should not be assumed that any headgear satisfying this specification will be acceptable for use in sanctioned lacrosse events. 1.2 The purpose of this specification is to provide reliable and repeatable test methods for the evaluation of protective headgear for women’s adult and youth lacrosse training and play. When designated optional equipment by lacrosse governing bodies, it is important that it not increase the risk of injury to players who choose not to wear it. Impacts from stick, ball, other player, ground, or other objects may be decreased in severity by use of this headgear. However, the relationship between impact and injury is not fully understood. 1.3 No headgear can provide protection against all impacts, foreseeable or not. This specification does not address the potential for injury from any type of impact. 1.4 All testing and requirements of this specification shall be in accordance with Test Methods F1446 and Specification F3077, except where noted in this specification. If there is a conflict between this standard and Test Methods F1446 and Specification F3077, this standard shall control. 1.5 Partial compliance with this standard is prohibited. 1.6 The values stated in SI (International System of Units) units are to be regarded as the standard. The values given in parentheses are for information only. Metric units of measurement in this specification are in accordance with the International System of Units (SI). If a value for measurement as given in this specification is followed by an equivalent value in other units, the first stated is to be regarded as the requirement. A given equivalent value may be approximate. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Headgear Used in Women’s Lacrosse (excluding Goalkeepers)

22/30455535 DC BS EN 397. 工业防护头盔

BS EN 397. Industrial protective helmets

BS EN ISO 12312-1:2022 眼睛和面部保护 太阳镜及相关眼镜 一般用途太阳镜

1   Scope This document is applicable to all afocal (plano power) sunglasses and clip-ons for general use, including road use and driving, intended for protection against solar radiation. Information on the use of sunglass filters is given in Annex A. Requirements for unmounted filters used as replacement or alternative filters are given in Annex C. This document is not applicable to: a) eyewear for protection against radiation from artificial light sources; b) eye protectors intended for specific sports (e.g. ski goggles or other types – see ISO 18527 (all parts)); c) sunglasses that have been medically prescribed for attenuating solar radiation; d) products intended for direct observation of the sun, such as for viewing a partial or annular solar eclipse, for which ISO 12312‑2 applies; e) products intended for occupational eye protection – see, for example, ISO 16321 (all parts).

Eye and face protection. Sunglasses and related eyewear. Sunglasses for general use

ASTM E3111/E3111M-22 抗弹道头部保护的标准试验方法

1.1 These test methods describe the tests for ballisticresistant head protection which consists of helmets and face shields. Test methods address backface deformation, resistance to penetration, and ballistic limit. It is anticipated that these test methods will be referenced by purchasers or other users in specifications or performance standards for helmets in order to meet the user’s specific needs. NOTE 1—ISO/IEC 17025 specifies the general requirements for the competence to carry out tests or calibrations, or both. It covers testing and calibration performed using standard methods, non-standard methods, and laboratory-developed methods. 1.2 These test methods do not address eye protection other than ballistic-resistant face shields that are attached to the helmet. 1.3 These test methods do not specify performance criteria or usages of the test results. 1.4 These test methods include procedures for conditioning of test items prior to ballistic testing. 1.5 In these test methods, “other standards and specifications” and “unless specified elsewhere” refer to documents (for example, military standards, purchase specifications) that require the use of these test methods. Purchasers and other users are responsible for the “other standards and specifications,” and for specifying any requirements that supersede those of these test methods. 1.5.1 Other standards and specifications will specify and describe the ballistic test threats to be used. 1.6 Units—Values stated in either the International System of Units (metric) or U.S. Customary units (inch-pound) are to be regarded separately as standard. The values stated in each system may not be exact equivalents. Both units are referenced to facilitate acquisition of materials internationally and minimize fabrication costs. Tests conducted using either system maintain repeatability and reproducibility of the test method and results are comparable. 1.7 If there is a discrepancy between these test methods and a user supplied document, the user supplied document takes precedence. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Ballistic Resistant Head Protection

BS ISO 12312-3:2022 眼睛和面部保护 太阳镜和相关眼镜 用于跑步、骑自行车和类似积极生活方式的太阳镜

1   Scope This document is applicable to all nominally afocal (plano power) sunglasses for protection against environmental elements, such as solar radiation, wind, dust and rain when running, cycling and following similar active lifestyle recreational activities but not intended for competitive sporting activities where enhanced impact resistance is required. The document specifies additional material, design, performance and marking requirements. The other applicable requirements are given in ISO 12312‑1. This type of sunglass is designed to reduce secondary hazards to the wearer in an accident rather than to provide high amounts of impact protection which may be difficult in a spectacle format. This document is not applicable to: a) eyewear for protection against radiation from artificial light sources, such as those used in solaria; b) eye protectors intended for specific sports, e.g. ski goggles or other types – see ISO 18527 (all parts); c) eye protectors for sports that include the use of a ball, stick, bat, racquet or other implement; d) sunglasses that have been medically prescribed for attenuating solar radiation; e) prod...

Eye and face protection. Sunglasses and related eyewear - Sunglasses for running, cycling and similar active lifestyles

EN ISO 12312-1:2022 眼睛和脸部防护.太阳镜和相关眼镜.第1部分:太阳镜的一般用途

This document is applicable to all afocal (plano power) sunglasses and clip-ons for general use, including road use and driving, intended for protection against solar radiation. Information on the use of sunglass filters is given in Annex A. Requirements for unmounted filters used as replacement or alternative filters are given in Annex C. This document is not applicable to: a) eyewear for protection against radiation from artificial light sources; b) eye protectors intended for specific sports (e.g. ski goggles or other types – see ISO18527 (all parts)); c) sunglasses that have been medically prescribed for attenuating solar radiation; d) products intended for direct observation of the sun, such as for viewing a partial or annular solar eclipse, for which ISO12312-2 applies; e) products intended for occupational eye protection – see, for example, ISO16321 (all parts).

Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use (ISO 12312-1:2022)