13.340.99 其他防护设备 标准查询与下载

GB/T 24537-2009 坠落防护 带柔性导轨的自锁器

本标准规定了带柔性导轨的自锁器的技术要求、测试方法、检验规则及标识。 本标准适用于体重及负重之和不大于100 kg的人员使用的带柔性导轨的自锁器,当使用者的总质量超过100 kg时,应征询制造商的意见,并经测试合格后方可使用。 本标准不适用于倾斜角度与垂直方向超过15º的柔性轨道。

Personal fall protection equipment-Guided type fall arrester including a flexible anchor line

GB/T 24538-2009 坠落防护 缓冲器

本标准规定了缓冲器的分类、技术要求、测试方法、检验规则及标识。 本标准适用于体重及负重之和不大于100 kg的人员高处作业、登高及悬吊作业中使用的缓冲器。

Personal fall protection equipment-Energy absorbers

GB 24544-2009 坠落防护.速差自控器

本标准规定了速差自控器的技术要求、测试方法、检验规则和标识等。 本标准适用于高处作业、登高及悬吊作业中体重及负重之和不大于100kg的人员使用的速差器。

Personal fall protection equipment.Retractable type fall arrester

GB/T 6096-2009 安全带测试方法

本标准规定了安全带测试方法和测试设备。 本标准适用于GB 6095-2009中规定的安全带及安全带的技术要求 。

Test method for personal fall protection systems

GB 6095-2009 安全带

本标准规定了安全带的分类和标记、技术要求、检验规则及标识。 本标准适用于高处作业、攀登及悬吊作业中使用的安全带。 本标准适用于体重及负重之和不大于100kg的使用者。 本标准不适用于体育运动、消防等用途的安全带。

Personal fall protection systems

GB/T 23468-2009 坠落防护装备安全使用规范

本标准规定了安全网、安全带等坠落防护装备的配备要求、安全使用要求、使用期限、定期检验要求及标识管理要求。 本标准适用于高处作业、攀登及悬吊作业中使用的安全网、安全带等坠落防护装备。 本标准不适用于体育运动、消防等用途的坠落防护装备。

Code of practice for safety use of fall protection equipments

GB/T 23469-2009 坠落防护.连接器

本标准规定了连接器的一般要求、技术性能、测试方法及标识。 本标准规定的连接器适用于GB 6095规定的安全带。

Personal fall protection equipment.Connectors

GB/T 13641-2006 劳动护肤剂通用技术条件

本标准规定了劳动护肤剂的术语、分类、要求、试验方法、检验规则、标志和标签，以及包装、运输、贮存和保质期等要求。 本标准适用于劳动护肤剂的生产、使用和销售。

General technical requirements of skin-protective agent for workers

GSO ISO 21924-5:2024 武术防护装备 第5部分：生殖器保护器和腹部保护器的附加要求和试验方法

ISO 21924-5:2017 specifies additional requirements and test methods for genital protectors and abdominal protectors used in unarmed martial arts such as taekwondo, karate, kick-boxing and similar disciplines.

Protective equipment for martial arts — Part 5: Additional requirements and test methods for genital protectors and abdominal protectors

GSO ISO 21924-3:2024 武术防护装备 第3部分：躯干保护器的附加要求和试验方法

ISO 21924-3:2017 specifies additional requirements and test methods for trunk protectors used in unarmed martial arts such as taekwondo, karate, kick-boxing and similar disciplines. It also applies to breast protectors for men. For general requirements and test methods for protective equipment for martial arts, see ISO 21924‑1.

Protective equipment for martial arts — Part 3: Additional requirements and test methods for trunk protectors

GSO ISO 21924-6:2024 武术防护装备 第6部分：女性胸部保护器的附加要求和试验方法

ISO 21924-6:2017 specifies additional requirements and test methods for breast protectors for females used in unarmed martial arts such as taekwondo, karate, kick-boxing and similar disciplines

Protective equipment for martial arts — Part 6: Additional requirements and test methods for breast protectors for females

T/GDIAEM 104-2024 10 kV电力电缆中间接头安全防护装置

规定了10 kV电力电缆中间接头安全防护装置的产品分类、产品型号、技术要求、试验方法、检验规则、标识、包装、运输和贮存。

Safety prevention device for 10 kV power cable intermediate joint

T/SXS 158-2023 警戒带技术规范

本文件规定了警戒带的技术要求、试验方法、检验规则、包装、运输及贮存。 本文件适用于警戒带产品。

Technical specifications for warning belts

T/QGCML 1738-2023 建筑施工作业用安全捆绑带

本文件规定了建筑施工作业用安全捆绑带的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于建筑施工作业用安全捆绑带的生产及检验。

Safety straps for construction work

T/QGCML 1284-2023 头戴柔性焊接防护面罩

本文件规定了头戴柔性焊接防护面罩的技术要求、试验方法、检验规则、标志、包装、运输和贮存等内容。 本文件适用于头戴柔性焊接防护面罩（以下简称“面罩”）的生产与检验。

Wearing a flexible welding protective mask

T/GSEE 0008-2023 输配电杆塔防坠落装置

《输配电杆塔防坠落装置》参考了DB44/457-2007《登高防坠落保护装置》、第三方数据、输配电杆塔防坠落装置制造及使用企业的经验制定技术指标、参数、试验等要求。

Fall prevention device for transmission and distribution poles and towers

ASTM F2676/F2676M-22 电弧保护毯标准规范

1.1 This product specification is used to determine the ability of the arc protective blankets to withstand the effects of arc flash and arc blast in a configuration in which the blanket is hung or anchored near energized equipment. Specifically, the imbedded test method is used to determine and specify the arc protective blanket’s (1) resistance to breakopen, (2) mechanical strength, and (3) ability to self-extinguish flames following a controlled arc exposure. 1.2 The products covered by this specification are labeled with a performance level for arc protective blankets in terms of: maximum arc current level expressed in kA and Breakopen Threshold Performance (BTP) expressed as the product of arc current in kA and arc duration in number of cycles to cause breakopen (kA*cycles). Cycles are on the basis of 60 Hz. 1.3 Blanket test specimens used in this specification are test size blankets of 152 6 5 cm [60 6 2 in.] by 122 6 5 cm [48 6 2 in.]. The test specimen size is for testing purposes only. Commercially available arc protective blankets either larger or smaller than the test specimen size are covered by this specification. 1.4 The arc protective blankets described in this specification are made of flame-resistant materials and are available in varying sizes and configurations based on the application. 1.5 The specification is used to measure and describe the properties of materials, products, or assemblies in response to incident thermal (convective and radiant) and pressure energies generated by an electric arc under controlled laboratory conditions. 1.6 The values stated in SI units shall be regarded as standard except as noted. The values stated in each system may not be exact equivalents; therefore, alternate systems must be used independently of the other. Combining values from the systems described in the text may result in nonconformance with the method. 1.7 This standard shall not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire assessment, which takes into account all of the factors, which are pertinent to an assessment of the fire hazard of a particular end use. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautions, see Section 9. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Arc Protective Blankets

T/AMET 4601-2022 核酸采样廊篷

  规定了核酸采样廊篷产品设计结构、抗载荷、环境适应性、标志性色彩、主要部件性能等要求。适用于核酸采样廊篷的设计、安装、生产。

Passageways for nucleic acid sampling

T/AMET 4602-2022 核酸采样队列间隔装置

    本文件规定了核酸采样队列间隔装置的外观要求、抗水平载荷性能、抗垂直载荷性能、抗风压性能、防腐蚀要求、尺寸及偏差要求。适用于核酸采样队列间隔装置的设计、安装、生产。

Nucleic acid sampling queue spacing device

T/ZSRA 001-2022 特种巡逻机器人通用技术要求

本文件规定了特种巡逻机器人的术语和定义、系统组成与分类、技术要求、试验方法、检验规则、标志和说明等内容。

General technical requirements of special patrol robot