13.340.99 其他防护设备 标准查询与下载

T/ZZB 2791-2022 防暴服

本文件规定了防暴服的术语和定义、 基本要求、 技术要求、试验方法、检验规则、 标志、 包装、运输和贮存及质量承诺。 本文件适用于防暴服的研发、生产、检验和验收。

Anti-riot suit

T/EERT 018-2021 金属抛光打磨用湿式除尘一体机

本文件规定了金属抛光打磨用湿式除尘一体机的分类与命名、技术要求、日常维护、检验方法、检验规则、标志和包装要求。

Wet dust collector for metalbuffingandmopping

KS K 0944-2021 防止侧面跌倒的髋部保护器 冲击减少率评价的试验方法

Hip protector against side fall — Test method for evaluation of impact reduction rate

BS 13700:2021 永久配重护栏系统 规格

Permanent counterweighted guardrail systems. Specification

GA 420-2021 警用防暴服

Police riot suit

STANAG 4810-2021 移动中的 CBRN 证明水合系统 AEP-4810 A 版

ON-THE-MOVE CBRN PROOF HYDRATION SYSTEM - AEP-4810 EDITION A

GA/T 1778-2021 警用训练手枪标识弹防护装具

Police training pistol marking bullet protective equipment

FORD WSS-M7H57-A1-2020 织带、安全带中等强度、低伸长***用于福特WSS-M99P1111-A***

WEBBINGS, SAFETY BELTS MEDIUM STRENGTH, LOW ELONGATION ***TO BE USED WITH FORD WSS-M99P1111-A***

ASTM C1695-20 热设备用可拆卸和可重复使用的柔性绝缘毯的制造标准规范

Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service

ASTM F1766-97a(2020) Ice Awls自救技术标准指南

1.1 This guide covers the self-rescue technique on ice utilizing the ice awl. 1.2 This guide is one of a series of self-rescue techniques for the ice rescuer. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Ice Awls Self-Rescue Technique

ASTM F1768-97(2020) 绳索救援行动中使用口哨信号的标准指南

1.1 This guide covers the methodology for the use of whistles as a means of communication during rope rescue operations. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Using Whistle Signals During Rope Rescue Operations

T/CEC 280-2019 电力用智能安全带技术条件

本标准规定了电力用智能安全带的功能、性能、包装、运输和贮存等方面的技术要求。 本标准适用于电力行业高处作业的智能安全带。

Technical conditions for smart safety belts for electric power

GA/T 816-2019 警用阻截网

Police blocking net

ASTM C1695-19 热设备用可拆卸和可重复使用的柔性绝缘毯的制造标准规范

Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service

ASTM F2676-19 用于确定电弧危险的电弧保护毯的保护性能的标准测试方法

1.1 This test method is used to evaluate the ability of the arc protective blankets to withstand the effects of arc flash and arc blast in a configuration in which the blanket is hung or anchored near energized equipment. Specifically, this test method is used to determine the arc protective blanket’s (1) resistance to breakopen, (2) mechanical strength, and (3) ability to self-extinguish flames following a controlled arc exposure. 1.2 This method is used to determine the performance of arc protective blankets in terms of: maximum arc current level expressed in kA and BTP (BTP) expressed as the product of arc current in kA and arc duration in number of cycles to cause breakopen (kA*cycles). Cycles are on the basis of 60 Hz. 1.3 Blanket test specimens used in this test method are test size blankets of 152 6 5 cm (60 6 2 in.) by 122 6 5 cm (48 6 2 in.). The test specimen size is for testing purposes only. Commercially available arc protective blankets either larger or smaller than the test specimen size are covered by this standard. 1.4 The arc protective blankets described in this test method are made of flame-resistant materials and are available in varying sizes and configurations based on the application. 1.5 This test method shall be used to measure and describe the properties of materials, products, or assemblies in response to incident thermal (convective and radiant) and pressure energies generated by an electric arc under controlled laboratory conditions. 1.6 The values stated in SI units shall be regarded as standard. The values given in parentheses are mathematical conversion to inch-pound or other units commonly used for arc testing. 1.7 This standard shall not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire assessment, which takes into account all of the factors, which are pertinent to an assessment of the fire hazard of a particular end use. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautions, see Section 7. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining the Protective Performance of an Arc Protective Blanket for Electric Arc Hazards

GA 68-2019 警用防刺服

police stab proof clothing

GA 422-2019 警用防暴盾牌

Police Riot Shield

ASTM C1695-18a 热设备用可拆卸和可重复使用的柔性绝缘毯的制造标准规范

Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service

ASTM C1695-18 热设备用可拆卸和可重复使用的柔性绝缘毯的制造标准规范

Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service

ASTM F3272-18 标准选择 护理和使用电弧防护毯的指南

1.1 This guide provides information for the selection, care, and use of arc protective blankets for personnel protection. 1.2 This guide covers positioning and securing arc protective blankets (tested to Test Method F2676) and channeling the thermal, ballistic, and concussive forces generated by an arc flash event using arc protective blankets. 1.3 This guide describes the use of the arc protective blanket to maximize its protective effectiveness to workers exposed to energized electrical equipment where complete de-energizing of the work zone cannot be achieved or for low-risk exposures with sufficient arc flash incident energy to warrant secondary protective means in the event of an arc flash. 1.4 The values stated in SI units are to be regarded as the standard. See IEEE/ASTM SI-10. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Selection, Care, and Use of Arc Protective Blankets