23.040.10 铁管和钢管 标准查询与下载

T/CISA 047-2020 “领跑者”标准评价要求 球墨铸铁管

本文件规定了球墨铸铁管产品企业标准“领跑者”标准评价的评价指标体系和评价方法。 本文件仅适用于球墨铸铁管产品企业标准水平评价。相关机构在制定企业标准“领跑者”评估方案时可参照使用，企业在制定企业标准时也可参照使用。

Assessment requirements for forerunner standard—Ductile iron pipes

DS/EN 15655-2:2020 球墨铸铁管、管件和附件《球墨铸铁管和管件有机内衬要求和试验方法》第2部分：管材热塑性酸改性聚烯烃（TMPO）内衬

Ductile iron pipes, fittings and accessories – Requirements and test methods for organic linings of ductile iron pipes and fittings – Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes

BS EN 15655-2:2020 球墨铸铁管、管件及附件. 球墨铸铁管和配件用有机内衬要求和试验方法. 第2部分: 热塑酸改性聚烯烃(TMPO)管内衬

Ductile iron pipes, fittings and accessories. Requirements and test methods for organic linings of ductile iron pipes and fittings. Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes

ASTM A135/A135M-20 电阻焊接钢管标准规范

Standard Specification for Electric-Resistance-Welded Steel Pipe

NF A48-655-2:2020 球墨铸铁管、管件及附件. 球墨铸铁管和配件用有机内衬要求和试验方法. 第2部分: 热塑酸改性聚烯烃(TMPO)管内衬

Domaine d'applicationLe présent document spécifie les prescriptions et les méthodes d'essai relatives aux revêtements intérieurs thermoplastiques en polyoléfine modifiée par un acide (TPMA) , appliqués en usine, et destinés à fournir une protection renforcée contre la corrosion p

Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2 : thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes

ASME B16.1-2020 灰口铸铁管法兰和法兰配件: 等级25, 125和250

Gray Iron Pipe Flanges and Flanged Fittings Classes 25, 125, and 250

ASTM A847/A847M-20 具有改善的大气耐腐蚀性的冷成型焊接无缝高强度 低合金结构管的标准规范

Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance

DIN EN ISO 13680:2020 石油和天然气工业 用作套管、油管、接箍毛坯和附件材料的耐腐蚀合金无缝管产品 技术交付条件(ISO 13680-2020) 英文版 EN ISO 13680-2020

This International Standard specifies the technical delivery conditions for corrosion-resistant alloy seamless tubes for casing, tubing and coupling stock. This International Standard contains no provisions relating to the connection of individual length of pipe.

Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020); English version EN ISO 13680:2020, only on CD-ROM

DIN 3267:2020 卫生龙头. 冲洗阀冲洗管

This standard applies to flushing pipes for toilet flush valves according to DIN EN 12541. This document is prepared by NA 003-02-01 AA \

Sanitary tapware - Flushing tubes for flush-valves

ASTM A511/A511M-20 无缝不锈钢机械管和空心棒的标准规格

Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar

EN 15655-2:2020 球墨铸铁管、管件和附件 球墨铸铁管和管件有机衬里的要求和试验方法 第2部分：管道的热塑性酸改性聚烯烃（TMPO）衬里

Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes

ISO 21051:2020 球墨铸铁管道系统的制造与安装

This document specifies the recommended practices and requirements for the installation of buried and above-ground ductile iron pipeline system conforming to ISO 2531, ISO 7186 and ISO 16631. The recommended practices in this document are intended to provide the practical advices based on the best methods of construction and installation of ductile iron pipeline system including pipes, fittings, valves and accessories.

Construction and installation of ductile iron pipeline system

NF A48-888*NF ISO 16134:2020 球墨铸铁管抗震抗沉降设计

Domaine d'applicationLe présent document spécifie la conception de canalisations en fonte ductile résistant aux tremblements de terre et aux phénomènes de subsidence, adaptées pour une utilisation dans des zones susceptibles d'être soumises à une activité sismique et à une subsid

Earthquake-resistant and subsidence-resistant design of ductile iron pipelines

T/SXZX 003-2020 合金钢铸管

本文件规定了合金钢铸管的产品名称、术语和定义、规格型号、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Alloy steel cast pipe

BS ISO 8180:2020 球墨铸铁管道 现场应用聚乙烯套管

What is ISO 8180 about?    ISO 8180 specifies the characteristics of polyethylene film, commonly called polyethylene sleeving, used as additional protection against corrosion for ductile iron pipelines, particularly when laid in aggressive soil conditions.   This film, the efficiency of which has been proved by experience, takes the form of a sheet or tube fitted around the pipes and fittings, on-site, immediately before pipe-laying.   Who is ISO 8180 for?    ISO 8180 on polyethylene sleeving is beneficial for  

Ductile iron pipelines. Polyethylene sleeving for site application

EN ISO 10893-9:2011/A1:2020 钢管.第9部分的无损检测:自动超声波探伤在带材/板材层状缺陷用焊接钢管的制造检测 包含修改件A1,2020

Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)

EN ISO 10893-10:2011/A1:2020 更改超声波检测频率；更改验收标准 包含修改件A1,2020

Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultr

EN ISO 10893-11:2011/A1:2020 钢管无损检测.第11部分:纵向和/或横向缺陷检测用焊接钢管焊缝的自动超声波探伤法 包含修改件A1,2020

Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency; change of acceptanc

ASTM A513/A513M-20a 电阻焊接碳钢和合金钢机械管标准规范

1.1 This specification covers electric-resistance-welded carbon and alloy steel tubing for use as mechanical tubing. 1.2 This specification covers mechanical tubing made from hotor cold-rolled steel. 1.3 This specification covers round, square, rectangular, and special shape tubing. Type Size Range (Round Tubing) Electric-Resistance-Welded Tubing from Hot-Rolled Steel outside diameter from 1⁄2 to 15 in. [12.7 to 380 mm] wall from 0.065 to 0.650 in. [1.65 to 16.5 mm] Electric-Resistance-Welded Tubing from Cold-Rolled Steel outside diameter from 3⁄8 to 12 in. [9.5 to 300 mm] wall from 0.022 to 0.134 in. [0.56 to 3.40 mm] 1.3.1 Indeterminate wall thicknesses may be ordered. In those cases the more stringent tolerances of Tables 4, 6, 7, 8, 9, 10, 11, 12, 16, and 17 shall apply. When sizes within the allowable ranges are ordered all other requirements of the specification shall be met. 1.4 This specification covers mechanical tubing in various Grades (see Section 5), Types (see 12.1), and Thermal Conditions (12.1). 1.5 Optional supplementary requirements are provided and when desired, shall be so stated in the order. 1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. In this specification hard or rationalized conversions apply to diameters, lengths and tensile properties. Soft conversion applies to other SI measurements. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

ISO 8180:2020 球墨铸铁管道.现场用聚乙烯套管

This document specifies the characteristics of polyethylene film, commonly called polyethylene sleeving, used as additional protection against corrosion for ductile iron pipelines, particularly when laid in aggressive soil conditions. This film, the efficiency of which has been proved by experience, takes the form of a sheet or tube fitted around the pipes and fittings, on-site, immediately before pipe-laying.

Ductile iron pipelines — Polyethylene sleeving for site application