23.040.10 铁管和钢管 标准查询与下载
共找到 1225 条与 铁管和钢管 相关的标准，共 82 页
This European Standard specifies the technical delivery conditions for light gauge welded stainless steel tubes, primarily for water application, including water intended for human consumption, supplied in straight lengths and suitable for connection by adhesive bonding, capillary fittings, compression fittings, press fittings or by inert gas welding. The standard covers the size range from 6 mm to 159 mm outside diameter in two grades of stainless steel from EN 10088-2.
Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption – Technical delivery conditions
- ICS
- 23.040.10
- CCS
- 发布
- 2021-07-01
- 实施
Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
- ICS
- 23.040.10
- CCS
- 发布
- 2021-07-01
- 实施
- 2021-07-01
本文件是T/CNEA 101《压水堆承压部件 材料》的第19部分。本文件共计23章，其中，1-3章为规范性条款，4-23章为压水堆承压部件 材料 第19部分：专门用途碳钢和合金钢公称管通用要求主要内容。主要内容包括：订货要求、冶炼方法、化学成分、拉伸性能、无缝钢管质量允许偏差、壁厚允许偏差、内径的允许偏差、外径的允许偏差、长度允许偏差、管端、直线度、焊补、复试、重新热处理、压扁试验、水压试验、质量证明文件、检查、拒收和产品标志。
PWR pressure boundary components—Material— Part 19:General Requirements of carbon steel and low-alloy steel pipes
- ICS
- 23.040.10
- CCS
- D441
- 发布
- 2021-06-28
- 实施
- 2022-03-31
本文件是T/CNEA 101《压水堆承压部件 材料》的第26部分。本文件共计15章，其中，1-3章为规范性条款，4-15章为压水堆承压部件 材料 第26部分：中、高温用锻制合金钢管道配件主要内容。主要内容包括：订货要求、制造、热处理、化学成分、拉伸试验、硬度试验、水压试验、尺寸、公差和表面质量、焊接修补、检查、质量证明文件和标志。
PWR pressure boundary components—Material— Part 26:Piping fittings of wrought alloy steel for moderate and high-temperature service
- ICS
- 23.040.10
- CCS
- D441
- 发布
- 2021-06-28
- 实施
- 2022-03-31
本文件是T/CNEA 101《压水堆承压部件 材料》的第20部分。本文件共计22章，其中，1-3章为规范性条款，4-22章为压水堆承压部件 材料 第20部分：高温用无缝碳钢公称管主要内容。主要内容包括：订货要求、制造、热处理、化学成分、拉伸试验、弯曲试验、压扁试验、水压试验、无损检测、管接头、质量与尺寸的允许偏差、长度、工艺质量、表面质量和外观、管端加工、试验规则、复试、试样及试验方法、质量证明文件和产品标志。
PWR pressure boundary components—Material— Part 20:Carbon-steel Seamless pipe for high-temperature applications
- ICS
- 23.040.10
- CCS
- D441
- 发布
- 2021-06-28
- 实施
- 2022-03-31
本文件是T/CNEA 101《压水堆承压部件 材料》的第22部分。本文件共计16章，其中，1-3章为规范性条款，4-16章为压水堆承压部件 材料 第22部分：高温用无缝铁素体合金钢管主要内容。主要内容包括：订货要求、制造、化学成分、工艺质量、表面质量和外观、成品分析、拉伸性能、直径允许偏差、壁厚允许偏差、水压试验、无损检测、要求的力学性能试验、质量证明文件和产品标志。
PWR pressure boundary components—Material— Part 22:Seamless ferritic alloy-steel pipe for high-temperature service
- ICS
- 23.040.10
- CCS
- D441
- 发布
- 2021-06-28
- 实施
- 2022-03-31
本文件是T/CNEA 101《压水堆承压部件 材料》的第34部分。本文件共计11章，其中，1-3章为规范性条款，4-11章为压水堆承压部件 材料 第34部分：高温中央电站用奥氏体不锈钢无缝钢管主要内容。主要内容包括：订货要求、制造、化学成分、力学性能、工艺质量、表面质量和外观、水压试验或无损检测、质量证明文件和标志。
PWR pressure boundary components—Material— Part 34:Seamless austenitic steel pipe for high-temperature centralstation service
- ICS
- 23.040.10
- CCS
- D441
- 发布
- 2021-06-28
- 实施
- 2022-03-31
本文件是T/CNEA 101《压水堆承压部件 材料》的第33部分。本文件共计15章，其中，1-3章为规范性条款，4-15章为压水堆承压部件 材料 第33部分：奥氏体不锈钢无缝钢管主要内容。主要内容包括：订货要求、制造、热处理、化学成分、壁厚的允许偏差、拉伸性能、要求的力学性能试验、水压试验或无损检测、长度、工艺质量、表面质量和外观、质量证明文件和产品标志。
PWR pressure boundary components—Material— Part 33:Seamless austenitic stainless steel pipes
- ICS
- 23.040.10
- CCS
- D441
- 发布
- 2021-06-28
- 实施
- 2022-03-31
本文件是T/CNEA 101《压水堆承压部件 材料》的第21部分。本文件共计28章，其中，1-3章为规范性条款，4-28章为压水堆承压部件 材料 第21部分：碳钢、铁素体合金钢和奥氏体合金钢管通用要求主要内容。主要内容包括：订货要求、冶炼、化学成分、力学性能、标准质量、壁厚允许偏差、外径允许偏差、长度允许偏差、电阻焊接钢管毛边高度允许偏差、直度和表面质量、焊补、复试、重新热处理、试样、压扁试验、反向压扁试验、扩口试验、卷边试验、水压试验、水下气压试验、无损检测、检查、质量证明文件、产品标志和包装和装运。
PWR pressure boundary components—Material— Part 21:General requirements for carbon, ferritic alloy, and austenitic alloy steel tubes
- ICS
- 23.040.10
- CCS
- D441
- 发布
- 2021-06-28
- 实施
- 2022-03-31
本文件是T/CNEA 101《压水堆承压部件 材料》的第32部分。本文件共计15章，其中，1-3章为规范性条款，4-15章为压水堆承压部件 材料 第32部分：热交换器用奥氏体不锈钢无缝钢管主要内容。主要内容包括：订货要求、制造、化学成分、批的定义、力学性能、工艺性能、水压试验或无损检测、工艺要求、规定壁厚的允许偏差、表面状态、质量证明文件和标志。
PWR pressure boundary components—Material— Part 32:Seamless austenitic stainless steel tubes for heat-exchanger
- ICS
- 23.040.10
- CCS
- D441
- 发布
- 2021-06-28
- 实施
- 2022-03-31
Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arcwelded) steel tubes (ISO 10893-12:2011 + Amd.1:2020) (consolidated version)
- ICS
- 23.040.10
- CCS
- 发布
- 2021-06-01
- 实施
- 2021-06-01
Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011 + Amd.1:2020) (consolidated version)
- ICS
- 23.040.10
- CCS
- 发布
- 2021-06-01
- 实施
- 2021-06-01
Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011 + Amd.1:2020) (consolidated version)
- ICS
- 23.040.10
- CCS
- 发布
- 2021-06-01
- 实施
- 2021-06-01
Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011 + Amd.1:2020) (consolidated version)
- ICS
- 23.040.10
- CCS
- 发布
- 2021-06-01
- 实施
- 2021-06-01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
- ICS
- 23.040.10
- CCS
- 发布
- 2021-06-01
- 实施
- 2021-06-01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
- ICS
- 23.040.10
- CCS
- 发布
- 2021-06-01
- 实施
- 2021-06-01
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011 + Amd.1:20
- ICS
- 23.040.10
- CCS
- 发布
- 2021-06-01
- 实施
- 2021-06-01
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2
- ICS
- 23.040.10
- CCS
- 发布
- 2021-06-01
- 实施
- 2021-06-01
Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011 + Amd.1:2020) (consolidated version)
- ICS
- 23.040.10
- CCS
- 发布
- 2021-06-01
- 实施
- 2021-06-01
1.1 This practice2 covers procedures for eddy current examination of seamless and welded tubular products made of relatively low conductivity materials such as titanium, stainless steel, and similar alloys, such as nickel alloys. Austenitic chromium-nickel stainless steels, which are generally considered to be nonmagnetic, are specifically covered as distinguished from the martensitic and ferritic straight chromium stainless steels which are magnetic. 1.2 This practice is intended as a guide for eddy current examination of both seamless and welded tubular products using either an encircling coil or a probe-coil technique. Coils and probes are available that can be used inside the tubular product; however, their use is not specifically covered in this document. This type of examination is usually employed only to examine tubing which has been installed such as in a heat exchanger. 1.3 This practice covers the examination of tubular products ranging in diameter from 0.125 to 5 in. (3.2 to 127.0 mm) and wall thicknesses from 0.005 to 0.250 in. (0.127 to 6.4 mm). 1.4 For examination of aluminum alloy tubular products, see standard Practice E215. 1.5 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys
- ICS
- 23.040.10
- CCS
- 发布
- 2021-06-01
- 实施
