23.040.10 铁管和钢管 标准查询与下载

T/QGCML 3922-2024 复合伸缩衔接钛管

本文件规定了复合伸缩衔接钛管的术语和定义、结构及原理、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于复合伸缩衔接钛管的生产及检验。

Composite telescopic connection titanium tube

ASTM A369/A369M-24 高温用碳素和铁素体合金钢锻造和镗孔管标准规范

1.1  This specification2 covers heavy-wall carbon and alloy steel pipe (Note 1 ) made from turned and bored forgings and is intended for high-temperature service. Pipe ordered under this specification shall be suitable for bending and other forming operations and for fusion welding. Selection will depend on design, service conditions, mechanical properties and high-temperature characteristics. Note 1:  The use of the word “pipe” throughout the several sections of this specification is used in the broad sense and intended to mean pipe headers, or leads. Note 2:  The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as “nominal diameter,” “size,” and “nominal size.” 1.2  Several grades of ferritic steels are covered. Their compositions are given in Table 1 . 1.3  Supplementary requirements (S1 to S7) of an optional nature are provided. Supplementary requirements S1 to S5 call for additional tests to be made, and when desired shall be so stated in the order, together with the number of such tests required as applicable. 1.4  The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. 1.5  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service

ASTM A53/A53M-24 黑色和热浸、镀锌、焊接和无缝钢管的标准规范

Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

ASTM A358/A358M-24 高温服务和一般应用用电熔焊奥氏体铬镍不锈钢管的标准规范

Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications

ASTM A688/A688M-24 无缝和焊接奥氏体不锈钢给水加热器管的标准规范

Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes

ASTM A813/A813M-24 单焊或双焊奥氏体不锈钢管的标准规范

Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe

ASTM A312/A312M-24 无缝、焊接和重冷加工奥氏体不锈钢管的标准规范

Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

ASTM A790/A790M-24 无缝和焊接铁素体/奥氏体不锈钢管标准规范

Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

ASTM A409/A409M-24 腐蚀或高温用焊接大直径奥氏体钢管标准规范

Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service

ASTM A249/A249M-24 焊接奥氏体钢锅炉、过热器、热交换器和冷凝器管的标准规范

Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

ASTM A179/A179M-24 无缝冷拔低碳钢换热器和冷凝器管的标准规范

Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

ASTM A270/A270M-24 无缝和焊接奥氏体和铁素体/奥氏体不锈钢卫生卡套管标准规范

Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing

ASTM A269/A269M-24 通用无缝和焊接奥氏体不锈钢管标准规范

Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

DB3211/T 1069-2023 公用燃气钢质管道年度检查规范

适用于特种设备目录中公用燃气钢质管道的年度检查，非特种设备目录的公用燃气钢质管道以及自行检查可参照执行

Specifications for annual inspection of public gas steel pipelines

T/GDSS 014-2023 不锈钢穿线套管及配件

本文件规定了不锈钢穿线套管(以下简称套管)及配件的术语与定义、产品分类与标记、技术要求、试验方法、检验规则、标志、包装、质量证明书、贮存与运输等。 本文件适用于穿线套管用不锈钢管，用以保护和管理交流1000 V和/或直流1500 V的电线电缆。

Stainless steel threading sleeves and accessories

T/GDSS 012-2023 不锈钢管及沟槽式管件

本文件规定了不锈钢管（以下简称钢管）及沟槽式管件（以下简称管件）的标记、规格与尺寸、要求、试验方法、检验规则、标识、包装、运输和贮存等。 本文件适用于公称尺寸不大于DN300，公称压力不大于PN25给水用和消防用等不锈钢管道连接用钢管和管件的设计、制造和验收。

Stainless steel pipes and grooved pipe fittings

T/CSTM 00398-2023 双金属冶金复合管界面缺欠的超声检测

本文件规定了双金属冶金复合管界面缺欠超声检测的术语和定义、一般要求、参考样管、超声检测设备校验、超声检测方法、验收和超声检测报告和存档。 本文件适用于双金属冶金复合管界面缺欠的超声检测。

Ultrasonic testing of bimetallic metallurgical clad pipe for interface imperfections

ASTM A450/A450M-23 碳素和低合金钢管的一般要求

Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes

ASTM A381/A381M-23 高压传输系统用金属电弧焊接碳或高强度低合金钢管的标准规范

Standard Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems

T/CFA 03036-2023 质量分级及“领跑者”评价要求 可锻铸铁管路连接件

本文件规定了可锻铸铁管路连接件质量及企业标准水平评价的基本要求、评价指标及要求、评价方法及等级划分和产品质量分级。 本文件适用于可锻铸铁管路连接件产品“领跑者”标准评价。相关机构开展质量分级和企业标准水平评价、“领跑者”产品评价以及相关认证或评价时可参照使用，企业在制定企业标准时也可参照本文件。

Assessment requirements for guality grading and forerunner- Malleable cast iron pipe fittings