25.140.30 手工工具 标准查询与下载

T/ZZB 0706-2018 交流1 kV、直流1.5 kV及以下电压等级带电作业用绝缘活扳手

本标准规定了交流1 kV、直流1.5 kV及以下电压等级带电作业用绝缘活扳手（以下简称绝缘活扳手）的术语和定义、产品分类和标记、基本要求、技术要求、试验方法、检验规则、标志、包装、运输与贮存和质量承诺。 本标准适用于在交流1 kV、直流1.5 kV及以下电压等级带电作业用的绝缘活扳手。

Live working–Adjustable wrenches for use up to 1 kV a.c. and 1.5 kV d.c.

SANS 387:2018 锤头和手锤

Covers the requirements for 14 types (see 3.1) of hammer heads and hand hammers, the handles of hammers being of wood, steel or glass fibre reinforced plastics, steel-reinforced rubber, steel-reinforced synthetic elastomer, steel-reinforced polymer or similar types of material.

Hammer heads and hand hammers

T/SDAS 28-2018 泰山品质 活扳手

本标准规定了泰山品质活扳手（以下简称活扳手）的各部分术语、定义和标记、技术要求、试验方法、检验规则和标志、包装、运输与贮存。 本标准适用于泰山品质活扳手。

Tarzan Quality Adjustable Wrench

BS ISO 3315:2018 螺钉和螺母的装配工具 手动方头套筒扳手的驱动部件 尺寸和测试

Assembly tools for screws and nuts. Driving parts for hand-operated square drive socket wrenches. Dimensions and tests

BS ISO 3316:2018 螺钉和螺母的装配工具 手动方头套筒扳手的附件 尺寸和测试

Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests

ISO 3316:2018 螺丝和螺母的装配工具 - 手动方形驱动套筒扳手的附件 - 尺寸和测试

This document applies to attachments for hand-operated square drive socket wrenches. NOTE 1 The attachments for hand-operated square drive socket wrenches covered by this standard are the ones identified in ISO 1703:2018 under reference No. 5100030, 5100040, 5100041 and 5100050. It specifies a) the overall dimensions; b) the minimum Rockwell hardness value for their driving squares; c) the method of torque testing; d) the minimum torsional strength values; e) the designation; and f) the marking. NOTE 2 For the specification of square adaptors with a hexagon or cylindrical flat drive, for power socket wrenches, see ISO 3317.

Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Dimensions and tests

QB/T 1736-2018 木工钻

本标准规定了木工钻的产品分类、要求、试验方法、检验规则及标志、包装、运输与贮存。 本标准适用于钻削木质孔的木工钻。

Woodworking drills

QB/T 1518-2018 电焊钳技术条件

本标准规定了电焊钳的产品分类、要求、试验方法、检验规则和标志、包装、运输与贮存。 本标准适用于焊条直径不超过10 mm的手工焊条电弧焊用的电焊钳。 本标准不适用于水下焊接用的电焊钳。

Technical requirements for electrode holder

ISO 3315:2018 螺钉和螺母用装配工具.手动方榫传动套筒扳手传动件.尺寸规格和试验

This document is applicable to driving parts of hand-operated square drive socket wrenches. NOTE The driving parts covered by this document are the ones identified in ISO 1703:2018 under reference No. 6100010 and 6100011, 6100030, 6100040, 6100050 and 6100051, 6100060 and 6100061, 6100090 as well as 6100100 and 6100101. It specifies: a) the overall dimensions; c) the method of torque testing; e) the designation; b) the minimum Rockwell hardness value for their driving squares; d) the minimum torsional strength values; f) the marking.

Assembly tools for screws and nuts - Driving parts for hand-operated square drive socket wrenches - Dimensions and tests

BS ISO 6787:2018 螺钉和螺母的装配工具 活动扳手

Assembly tools for screws and nuts. Adjustable wrenches

BS ISO 10102:2018 螺钉和螺母的装配工具 双头开口工程师扳手 外形尺寸

1   Scope This document specifies the overall length and the maximum head thickness for double-headed open-ended engineers' wrenches. NOTE The wrenches covered by this document are the ones identified in ISO 1703:2005 under reference No. 1 1 01 02 0. This document does not cover technical specifications for these products. Technical specifications are given in ISO 1711‑1:2016, series C.

Assembly tools for screws and nuts. Double-headed open-ended engineers' wrenches. Outside dimensions

BS ISO 10104:2018 螺钉和螺母的装配工具 双头套筒扳手、深偏置和修改偏置 外形尺寸

1   Scope This document specifies the overall length and the maximum head thickness for double-headed box wrenches, deep offset (Form B) and modified offset (Form A). NOTE The wrenches covered by this document are the ones identified in ISO 1703:2005 under reference numbers 1 1 02 06 0 and 1 1 02 05 0. This document does not cover technical specifications for these products. Technical specifications are given in ISO 1711‑1:2016, series A.

Assembly tools for screws and nuts. Double-headed box wrenches, deep offset and modified offset. Outside dimensions

BS ISO 10103:2018 螺钉和螺母的装配工具 双头套筒扳手 平头和偏置 外形尺寸和测试扭矩

Assembly tools for screws and nuts. Doubled-headed box wrenches, flat and offset. Outside dimensions and test torques

ISO 10102:2018 螺钉和螺母用装配工具.双头开口扳手

This document specifies the overall length and the maximum head thickness for double-headed open- ended engineers' wrenches. NOTE The wrenches covered by this document are the ones identified in ISO 1703:2005 under reference No. 1101020. This document does not cover technical specifications for these products. Technical specifications are given in ISO 1711-1:2016, series C.

Assembly tools for screws and nuts - Double-headed open-ended engineers' wrenches - Outside dimensions

ISO 6787:2018 螺钉和螺母用装配工具.活扳手

This document specifies the dimensions of adjustable wrenches and the admissible clearance of the adjustable jaw. It also specifies test conditions to test the suitability of tool performance. NOTE The wrenches covered by this document are the ones identified in ISO 1703:2005 under reference number 1101040.

Assembly tools for screws and nuts - Adjustable wrenches

ISO 10103:2018 螺钉和螺母用装配工具.双头直颈和弯颈梅花扳手.外部尺寸和试验扭矩

This document specifies the overall length and the maximum head thickness for double-headed box wrenches, flat (Form B) and offset (Form A). NOTE The wrenches covered by this document are the ones identified in ISO 1703:2005 under reference numbers 1102030 and 1102040. This document covers technical specifications for the test torque of these products. All other technical specifications are given in ISO 1711-1.

Assembly tools for screws and nuts - Doubled-headed box wrenches, flat and offset - Outside dimensions and test torques

ISO 10104:2018 螺钉和螺母用装配工具.双头高颈和矮颈梅花扳手.外部尺寸

This document specifies the overall length and the maximum head thickness for double-headed box wrenches, deep offset (Form B) and modified offset (Form A). NOTE The wrenches covered by this document are the ones identified in ISO 1703:2005 under reference numbers 1102060 and 1102050. This document does not cover technical specifications for these products. Technical specifications are given in ISO 1711-1:2016, series A.

Assembly tools for screws and nuts - Double-headed box wrenches, deep offset and modified offset - Outside dimensions

IEC 62841-2-11:2015+AMD1:2018 CSV 电动手持式工具、可移动工具及草坪和花园机械的安全第2-11部分:手持式往复式锯的特殊要求

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws

KS B 3005-2017 工程师扳手

Engineer’s wrench

T/ZZB 0282-2017 棘轮扳手

本标准规定了棘轮扳手的术语和定义、产品分类、标记和图示、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本标准适用于扳拧螺栓和螺母或其他紧固件的棘轮扳手。

Ratcheting wrenches