25.140.30 手工工具 标准查询与下载

KS B ISO 5747-2022 钳子和钳子 杠杆辅助侧切钳、端切钳和斜切钳 尺寸和测试值

Pliers and nippers－Lever assisted side cutting pliers, end and diagonal cutting nippers－Dimensions and test values

KS B ISO 5745-2022 钳子和钳子 用于夹持和操作的钳子 尺寸和测试值

Pliers and nippers－Pliers for gripping and manipulating－Dimensions and test values

KS B ISO 5742-2022 钳子和钳子 术语

Pliers and nippers－Nomenclature

EN IEC 62841-4-7:2022 电动手持工具、可移动工具和草坪和园艺机械 安全 第 4-7 部分：行人控制的手扶式草坪松土机和曝气机的特殊要求

IEC 62841-4-7:2022 clause 1 of IEC 62841-1:2014, is applicable, except as follows: Addition: This document applies to pedestrian controlled walk-behind lawn scarifiers and lawn aerators which are designed for regenerating lawns by combing out materials such as grass, thatch and moss or cutting vertically into the lawn face using metallic tines; and/or rigid non-metallic tines which rotate about a horizontal axis. This document does not apply to pedestrian controlled walk-behind lawnmowers; towed/semi-mounted lawn scarifiers and lawn aerators; ride-on machines; non-powered lawn scarifiers and lawn aerators; combustion engine powered lawn scarifiers and lawn aerators; plug aerators (corers); hybrid and fuel cell powered machines and associated charging systems; and garden tractors or their attachments.

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-7: Particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerators

IEC 62841-4-7:2022 电动手持工具、可移动工具以及草坪和花园机械的安全第4-7部分:步行控制的步行式草坪松土机和曝气机的特殊要求

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-7: Particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerato

T/CI 040-2022 铜合金防爆工具

本文件规定了铜合金防爆工具的产品分类、标记、要求、试验方法、检验规则、标志、包装、运输与贮存。 本文件适用于矿山、工厂以及船舶、车辆、飞机、油田、石油、化工、油库、油站等易燃易爆场所，为防止在作业过程中产生机械火花引起的可燃性气体爆炸所使用的铜合金防爆工具及其他新研发铜合金材料的防爆工具（以下简称防爆工具）。

Copper alloy tools for explosive atmospheres

T/JSQA 142-2022 手用断线钳

1、基本尺寸 对于产品总长偏差给与了限制，其数值变化量远小于中国行业标准和日本标准。 2、硬度 对于断线钳刀片的刃口硬度相对于中国行业标准、日本标准和美国标准一方面提高了最小硬度要求，另一方面缩小了硬度的区间范围。 3、寿命试验 在行业标准的基础上增加了手用断线钳的使用寿命次数要求。

Hand bolt cutters

T/SZBX 042-2022 钢丝钳

本文件规定了钢丝钳的分类、要求、试验方法、检验规则、包装、标志、运输与贮存。

Engineer's pliers

GSO ISO 10102:2022 螺钉和螺母的装配工具 双头开放式工程师的工具扳手 外部尺寸

ISO 10102:2018 specifies the overall length and the maximum head thickness for double-headed open-ended engineers' wrenches. NOTE The wrenches covered by this document are the ones identified in ISO 1703:2005 under reference No. 1 1 01 02 0. ISO 10102:2018 does not cover technical specifications for these products. Technical specifications are given in ISO 1711‑1:2016, series C.

Assembly tools for screws and nuts — Double-headed open-ended engineers' wrenches — Outside dimensions

GSO ISO 10103:2022 螺钉和螺母的装配工具 双头套筒扳手 平头和偏置 外部尺寸和测试扭矩

ISO 10103:2018 specifies the overall length and the maximum head thickness for double-headed box wrenches, flat (Form B) and offset (Form A). NOTE The wrenches covered by this document are the ones identified in ISO 1703:2005 under reference numbers 1 1 02 03 0 and 1 1 02 04 0. ISO 10103:2018 covers technical specifications for the test torque of these products. All other technical specifications are given in ISO 1711‑1.

Assembly tools for screws and nuts — Doubled-headed box wrenches, flat and offset — Outside dimensions and test torques

GSO ISO 6787:2022 螺钉和螺母的装配工具 活动扳手

ISO 6787:2018 specifies the dimensions of adjustable wrenches and the admissible clearance of the adjustable jaw. It also specifies test conditions to test the suitability of tool performance.

Assembly tools for screws and nuts — Adjustable wrenches

GSO ISO 10104:2022 螺钉和螺母的装配工具 双头套筒扳手、深偏置和修正偏置 外部尺寸

ISO 10104:2018 specifies the overall length and the maximum head thickness for double-headed box wrenches, deep offset (Form B) and modified offset (Form A). NOTE The wrenches covered by this document are the ones identified in ISO 1703:2005 under reference numbers 1 1 02 06 0 and 1 1 02 05 0. ISO 10104:2018 does not cover technical specifications for these products. Technical specifications are given in ISO 1711‑1:2016, series A.

Assembly tools for screws and nuts — Double-headed box wrenches, deep offset and modified offset — Outside dimensions

T/ZZB 2657-2022 便携一体式套筒扳手

本文件规定了便携一体式套筒扳手的产品结构和尺寸、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本文件适用于套筒和螺杆呈固定连接结构，用于装卸六角螺栓和螺母， 5 mm～14 mm 多种规格组合一体的可折叠收纳手动套筒扳手。

Portable integrated socket wrench

BS ISO 9343:2021 钳子和钳子 滑口钳 尺寸及测试值

What is ISO 9343 – Dimensions for slip joint pliers about? ISO 9343 is an International Standard that discusses hand-operated tools such as pliers and nippers. ISO 9343 specifies the principal dimensions of slip joint pliers, designated as No. 206 in ISO 5742, and the test values, in order to verify their aptitude to function in conformity with ISO 5744. The general technical requirements are given in ISO 5743. Note: The slip joint pliers illustrated in ISO 9343 are examples only and are not intended to affect the manufacturer's design. Who is ISO 9343 – Dimensions for slip joint pliers for ? ISO 9343 on the dimensions for slip joint pliers is useful for: Plier and nipper manufacturers Slip joint plier manufacturers Product designers Mechanical engineers Quality control and inspection bodies Why should you use ISO 9343 – ...

Pliers and nippers. Slip joint pliers. Dimensions and test values

T/CASMES 8-2022 园艺工具 剪枝剪

1  范围　 2  规范性引用文件　 3  术语和定义　 4   结构组成　 5   要求　 6   试验方法　 7   检验规则　 8   包装、标志、运输和贮存　

Garden tools Pruning shears

BS ISO 5743:2021 钳子和钳子 一般技术要求

What is ISO 5743 - General technical requirements for pliers and nippers about?   ISO 5743 is a standard that covers general technical requirements for pliers and nippers, ensuring stable operability, strength and performance.   ISO 5743 specifies the general technical requirements to be met by pliers and nippers. ISO 5743 is only applicable to pliers for which ISO standards exist.   Note: ISO 5743 does not specify the insulating or antistatic characteristics of handle coatings. Plastic coatings or plastic sleeves are intended for gripping comfort only.   Who is ISO 5743 - General technical requirements for pliers and nippers for?   ISO 5743 on general technical requirements for pliers and nippers applies to:

Pliers and nippers. General technical requirements

BS ISO 5746:2021 钳子和钳子 工程师和架线工的钳子 尺寸及测试值

What is ISO 5746 - Dimensions and test values for pliers about?   ISO 5746 is a standard that covers dimensions and test values for pliers, ensuring the strength, quality and performance in plier operations.   ISO 5746 specifies the principal dimensions of engineer's and Lineman's pliers and the test values for the pliers in order to verify their aptitude to function in conformity with ISO 5744 . General technical requirements are given in ISO 5743 .   Note: The engineer's and Lineman's pliers illustrated in ISO 5746 are examples only and are not intended to affect the manufacturer's design.  Who is ISO 5746 - Dimensions and test values for pliers for?   ISO 5746 on dimensions and test values for pliers applies to:

Pliers and nippers. Engineer's and Lineman's pliers. Dimensions and test values

BS ISO 8976:2021 钳子和钳子 多用滑接钳 尺寸及测试值

What is ISO 8976 about? ISO 8976 is a standard that deals with the technicalities of pliers and nippers. It particularly specifies the principal dimension of multiple slip-joint pliers, which ensures the standardization of their size and uniformity according to global norms. ISO 8976 also specifies test values for the pliers to verify their aptitude to function in conformity with other standards. It also specifies the information about the designation and marking for multiple slip-joint pliers. Who is ISO 8976 for? ISO 8976 on multiple slip joint pliers applies to: Manufacturers of slip joint pliers and nippers Distributors, dealers and importers of slip joint pliers and nippers Why should you use ISO 8976? Slip joint pliers have a pivot point or fulcrum that may be changed to extend the jaw size range. When the pliers are fully opened, most slip joint pliers have a mechanism that allows the pivot point to slide into one of several locations. ISO 8976 provides you with all the data regarding dimension and test values for multiple slip joint pliers which allows you to standardize the size and uniformity of pliers and nippers. The guidance in ISO 8976 enables the standardization of dimensions in multiple slip joint pliers that comply with global standards. What’s changed since the last update? BS ISO 8976:2021 supersedes BS ISO 8976:2004 , which is now withdrawn. BS ISO 8976:2021 includes introduction of minimum and maximum length for each nominal length.

Pliers and nippers. Multiple slip joint pliers. Dimensions and test values

ISO 5746:2021 钳子和钳子.工程师和线路工用钳子.尺寸和试验值

This document specifies the principal dimensions of engineer's and Lineman's pliers and the test values for the pliers in order to verify their aptitude to function in conformity with ISO 5744. General technical requirements are given in ISO 5743. The engineer's and Lineman's pliers illustrated in this document are examples only and are not intended to affect the manufacturer's design.

Pliers and nippers — Engineer's and Lineman's pliers — Dimensions and test values

ISO 5743:2021 钳子和钳子.一般技术要求

This document specifies the general technical requirements to be met by pliers and nippers. It does not specify insulating or antistatic characteristics of handle coatings. Plastic coatings or plastic sleeves are intended for gripping comfort only. This document is only applicable to pliers for which ISO standards exist.

Pliers and nippers — General technical requirements