25.140.30 手工工具 标准查询与下载

DIN ISO 3317:2017 螺钉和螺母用装配工具.机动套筒扳手用带六角形或圆柱平传动的方形传动接头(ISO 3317-2015)

This document prescribes the technical specifications for square drive adaptor hexagon or cylindrical flat inserts for power socket wrenches. It applies to square drive adaptor with hexagon drive or with cylindrical flat end drive as defined in ISO 1173, and to driving squares for power socket wrenches as defined in ISO 1174-2.

Assembly tools for screws and nuts - Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches (ISO 3317:2015)

QB/T 5162-2017 螺钉旋具 测电螺钉旋具

Screwdriver electric screwdriver

QB/T 2083-2017 平口式油灰刀

Flat putty knife

QB/T 1200-2017 链条管子钳

chain pipe pliers

QB/T 1558.1-2017 台虎钳 通用技术条件

General technical conditions for bench vise

QB/T 2211-2017 管子台虎钳

本标准规定了管子台虎钳的产品分类、技术要求、试验方法、检验规则、标志、包装、运翰与贮存。 本标准适用于夹紧金属管子，进行绞制螺纹，切断及连接管子等作业用的管子台虎钳。

Pipe anvil vice

QB/T 1558.2-2017 台虎钳 普通台虎钳

Bench vise Ordinary bench vise

QB/T 1201-2017 手用木工凿

Hand carpentry chisel

QB/T 2292-2017 手动拉铆枪

Manual rivet gun

QB/T 1558.3-2017 台虎钳 多用台虎钳

Bench viseMulti-purpose bench vise

QB/T 2082-2017 木工手用刨刀与盖铁

Woodworking hand planer and cover iron

QB/T 2096.2-2017 桌虎钳.燕尾桌虎钳

本标准规定了燕尾桌虎钳的产品分类、技术要求、试验方法、检验规则与包装、标志、运输、贮存。 本标准适用于燕尾桌虎钳。

Bench vices Swallow tail bench vices

QB/T 2096.1-2017 桌虎钳 通用技术条件

General technical conditions for table vises

QB/T 2096.3-2017 桌虎钳 方孔桌虎钳

Table Vise Square Hole Table Vise

DIN EN ISO 6789-2:2017 螺钉和螺母的装配工具.手动扭矩工具.第2部分: 测量不确定度的校准和测定要求(ISO 6789-2-2017);德文版本EN ISO 6789-2-2017

Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017); German version EN ISO 6789-2:2017

DIN EN ISO 6789-1:2017 螺钉和螺母的装配工具 手动扭矩工具 第1部分：设计一致性测试和质量一致性测试的要求和方法：一致性声明的最低要求（ISO 6789-1:2017）；德文版 EN ISO 6789-1:2

Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance (ISO 6789-1:2017); German version EN ISO 6789-1:2

BS ISO 2725-1:2017 螺钉和螺母的装配工具 方形驱动套筒 手动插座

Assembly tools for screws and nuts. Square drive sockets. Hand-operated sockets

ISO 2725-1:2017 螺钉和螺母用装配工具.第1部分:手动扳手

This document specifies dimensions, the designation, and the marking of hand-operated square drive sockets with operating end and having a hexagonal or double hexagonal form in accordance with NOTE Hand-operated square drive sockets covered by this document are the ones identified in ISO 1703 under reference numbers 2102010. This document does not cover technical specifications for these products. Technical specifications are given in ISO 1711-1.

Assembly tools for screws and nuts - Square drive sockets - Part 1: Hand-operated sockets

ISO 4229:2017 螺钉和螺母的装配工具-单头工程师&apos；低扭矩用s型扳手.头部的最大外部尺寸和试验扭矩

This document specifies requirements of single-head engineer’s wrenches with nominal width across flats from 3,2 to 120. It specifies the maximum outside dimensions of heads and gives the test torque values. The “lower torque application” designation is in accordance with the smaller head dimensions. NOTE The wrenches covered by this document are the ones identified in ISO 1703:2005 under reference Nos.  1101010 and 1101011.

Assembly tools for screws and nuts — Single-head engineer's wrenches for lower torque applications — Maximum outside dimensions of heads and test torques

DIN 3123:2017 手动套筒扳手外四方连接件

Attachments for hand operated square drive socket wrenches