29.080.10 绝缘子 标准查询与下载

KS C IEC 60383-2-2018(2023) 标称电压1000V以上架空线路用绝缘子第2部分:交流系统用绝缘子串和绝缘子组定义、试验方法和验收标准

Insulators for overhead lines with a nominal voltage above 1 000 V－Part 2：Insulator strings and insulator sets for a.c. systems－Definitions, test methods and acceptance criteria

KS C IEC 60383-1-2018(2023) 标称电压超过1000V的架空线路用绝缘子.第1部分:交流系统用陶瓷或玻璃绝缘子.定义、试验方法和验收标准

Insulators for overhead lines with a nominal voltage above 1 000 V — Part 1: Ceramic or glass insulator units for a.c. systems — Definitions, test methods and acceptance criteria

KS C IEC 61109:2018 架空绝缘子 - 复合悬挂和张力绝缘子 额定电压大于1000 V的系统 - 定义 测试方法和验收标准

Insulators for overhead lines — Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V — Definitions, test methods and acceptance criteria

GSO IEC/TR 62662:2017 聚合物绝缘子芯材脆性断裂的生产、测试和诊断指南

This technical report presents an analysis of the risk of influencing factors for brittle fracture of composite insulators that are mostly loaded in the tensile mode (suspension and tension insulators). Guidance is given to reduce the risk of in-service brittle fractures. This phenomenon is limited to tension and suspension insulators. However, the general information given concerning the importance of various parameters can be used as a guideline for the design and production of any kind of composite insulator.

Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials

GSO IEC 60372:2017 串绝缘子单元球窝联轴器的锁定装置 尺寸和试验

This standard is applicable to locking devices used with ball and socket couplings of string insulator units and used with the corresponding metal fittings standardized in I E C Publication 120: Dimensions of Ball and Socket Couplings of String Insulator Units, when they are supplied separately. When these locking devices are supplied with an insulator or fitting, they shall be considered as an integral part of it. In this case, the relevant tests shall be included with those of insulators, as specified in IEC Publication 383: Tests on Insulators of Ceramic Material or Glass for Overhead Lines with a Nominal Voltage Greater than 1000 V. On request, a certificate shall be delivered confirming that the tests on locking devices as specified in this publication, have been carried out. The locking devices are usually supplied with the insulators or corresponding metal fittings.

Locking devices for ball and socket couplings of string insulator units - Dimensions and tests

DIN EN 62772:2017 交流电压高于1000 V,直流电压高于1500 V变电站用电站支柱复合空心绝缘子.定义,试验方法和验收标准(IEC 62772-2016);德文版本EN 62772-2016

Composite Hollow Core Station Post Insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V - Definitions, test methods and acceptance criteria (IEC 62772:2016); German version EN 62772:2016

DIN EN 61466-1:2017 额定电压超过1000V的架空线用复合绝缘子串组合件.第1部分:标准强度等级和端接头(IEC 61466-1-2016);德文版本EN 61466-1-2016

Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 1: Standard strength classes and end fittings (IEC 61466-1:2016); German version EN 61466-1:2016

DIN CLC/TR 62662:2017 聚合物绝缘子关于芯材脆性断裂的生产、测试和诊断指南（IEC/TR 62662:2010）；德文版 CLC/TR 62662:2011

Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials (IEC/TR 62662:2010); German version CLC/TR 62662:2011

GOST 1232-2017 电压为1至35kv的瓷和玻璃针式绝缘子. 通用规范

Porcelain and glass pin type insulators for voltage from 1 to 35 kV. General specifications

GOST 27661-2017 线路悬式盘形绝缘子 类型、参数及尺寸

Line suspension disk insulators. Types, parameters and dimensions

GOST 30284-2017 铁路接触网用绝缘子 一般规格

Insulators for contact net of railways. General specifications

GOST R 51155-2017 线配件. 验收规则和试验方法

Line accessories. Acceptance rules and methods of tests

T/ZZB 0153-2016 特、大吨位直流盘形悬式钢化玻璃绝缘子

本标准规定了特、大吨位直流盘形悬式钢化玻璃绝缘子的术语和定义、主要尺寸和特性、基本要求、技术要求、试验方法、检验规则、标志、包装、保管与储运和质量承诺等要求。 本标准适用于机械强度等级为300kN、420kN、550kN、760kN和840kN的直流盘形钢化玻璃绝缘子(以下简称“绝缘子”)。

High & extra high strength DC toughened glass suspension insulator

BS PD IEC/TS 60815-4:2016 污染条件下使用高压绝缘子的选择和尺寸确定. 直流系统用绝缘子

Selection and dimensioning of high-voltage insulators intended for use in polluted conditions. Insulators for d.c. systems

BS EN 62772:2016 交流电压高于1000 V, 直流电压高于1500 V变电站用电站支柱复合空心绝缘子. 定义, 试验方法和验收标准

Composite hollow core station post insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V. Definitions, test methods and acceptance criteria

EN 62772:2016 交流电压大于 1 000 V 和直流电压大于 1 500 V 的变电站用复合空心柱式绝缘子 定义、试验方法和验收标准

IEC 62772:2016 applies to composite hollow core station post insulators consisting of a load-bearing insulating tube (core) made of resin impregnated fibres an insulating filler material (e.g. solid, liquid, foam, gaseous pressurized or unpressurized), a housing (outside the insulating tube) made of polymeric material (for example silicone or ethylene-propylene) and metal fixing devices at the ends of the insulating tube. Composite hollow core station post insulators as defined in this standard are intended for general use in substations in both, outdoor and indoor environments, operating with a rated AC voltage greater than 1 000 V and a frequency not greater than 100 Hz or for use in direct current systems with a rated voltage greater than 1 500 V. The object of this standard is: - to define the terms used; - to prescribe test methods; - to prescribe acceptance criteria. All the tests in this standard, apart from the thermal-mechanical test, are performed at normal ambient temperature. This standard does not prescribe tests that may be characteristic of the apparatus of which the composite hollow core station post insulator ultimately may form a part.

Composite Hollow Core Station Post Insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V - Definitions, test methods and acceptance criteria

DIN IEC/TS 62073:2016 绝缘体表面疏水性测量指南(IEC/TS 62073-2016)

Guidance on the measurement of hydrophobicity of insulator surfaces (IEC/TS 62073:2016)

IEC TS 60815-4:2016 用于污染环境的高压绝缘子的选择和尺寸 第4部分：直流系统的绝缘子

This part of IEC 60815, which is a Technical Specification, is applicable as first approach for the determination of the required d.c. Unified Specific Creepage Distance for insulators with respect to pollution. To avoid excessive over or under design, existing operation experience should be compared and eventually additional appropriate tests may be performed by agreement between supplier and customer. It is applicable to: Glass and porcelain insulators; Composite and hybrid insulators with an HTM or non-HTM housing. This part of IEC 60815 gives specific guidelines and principles to arrive at an informed judgement on the probable behaviour of a given insulator in certain pollution environments. The structure and approach of this part of IEC 60815 are similar to those explained in Part 1, but adapted for the specific issues encountered with polluted HV d.c. insulation. The aim of this Technical Specification is to give the user simplified means to; Identify issues specific to d.c. applications that can affect the choice and design process; Determine the equivalent d.c. Site Pollution Severity (SPS) from measurements, correcting for electrostatic effects, diameter, pollution distribution and composition; Determine the reference USCD for different candidate insulating solutions, taking into account materials, dimensions and risk factors; Evaluate the suitability of different insulator profiles; Discuss the appropriate methods to verify the performance of the selected insulators, if required; This simplified process is intended to be used when comparable operational experience from existing d.c. system is incomplete or not available. The simplified design approach might result in a solution that exceeds the physical constraints of the project. More refined approaches for such cases, e. g. using a statistical approach, are given in the CIGRE d.c. guidelines [1]. In extreme cases, e. g. for exceptionally severe site conditions, alternative solutions such as changing the line route, relocation of converter stations or using an indoor d.c. yard may need to be considered.

Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 4: Insulators for d.c. systems

BS PD IEC/TS 62896:2015 交流和直流高压装置用混合绝缘子.定义,试验方法和验收标准

Hybrid insulators for a.c. and d.c. high-voltage applications. Definitions, test methods and acceptance criteria

BS EN 61466-1:2016 标称电压大于 1000 V 的架空线路用复合串绝缘子单元 标准强度等级和端部配件

Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V. Standard strength classes and end fittings