29.080.10 绝缘子 标准查询与下载

DL/T 1470-2015 交流系统用盘形悬式复合瓷或玻璃绝缘子串元件

本标准规定了标称电压高于1000V、频率为50Hz的交流系统用盘形悬式复合瓷或玻璃绝缘子串元件的型号及结构尺寸、技术要求、检验规则、试验方法、验收、包装、运输和储存。 本标准适用于交流架空电力线路、发电厂及变电站用盘形悬式复合瓷或玻璃绝缘子（简称绝缘子）。

Cap and pin suspension ceramic or glass string insulators unit with composite shed for a.c. systems

DL/T 1469-2015 输变电设备外绝缘用硅橡胶辅助伞裙使用导则

本标准规定了输变电设备外绝缘用硅橡胶辅助伞裙(简称辅助伞裙)的基本技术要求、检验规则、包装与贮存、施工、验收及运行维护等。 本标准适用于110kV及以上交直流系统、环境温度-40℃~+40℃、海拔1000m以下条件下运行的输变电设备(包括支柱绝缘子、套管和盘形悬式绝缘子等，不包括避雷器)外绝缘用硅橡胶辅助伞裙。

Application guide of auxiliary silicone rubber shed for transmission and substation equipment external insulation

DL/T 1472.2-2015 换流站直流场用支柱绝缘子 第2部分：尺寸与特性

Post insulators for d.c. field of converter stations part 2: dimensions and characteristics

BS PD IEC/TS 61245:2015 直流系统用高压陶瓷和玻璃绝缘子的人工污染试验

Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems

IEC TS 61245:2015 直流系统用高压绝缘子的人工污秽试验

Artificial pollution tests on high-voltage insulators to be used on d.c systems

KS C 3836-2014 配电用球形支座悬式绝缘子

Ball and socket type suspension insulator

KS C IEC 62217:2014 用于室内和室外的聚合物高压绝缘子 一般定义 测试方法和验收标准

Polymeric insulators for indoor and outdoor use with a nominal voltage >1 000 V — General definitions, test methods and acceptance criteria

KS C IEC 62231:2014 交流电压大于 1 000 V 至 245 kV 的变电站用复合站柱绝缘子 定义、试验方法和验收标准

Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV — Definitions, test methods and acceptance criteria

KS C IEC 61211:2014 标称电压大于 1 000 V 的架空线路用陶瓷材料或玻璃绝缘子 空气中的脉冲击穿试验

Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V — Impulse puncture testing in air

KS C IEC 62231-2014(2019) 带变电站的复合站柱式绝缘子电压大于1000 V至245 kV - 定义 测试方法和验收标准

Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV — Definitions, test methods and acceptance criteria

KS C IEC 62223:2014 绝缘体 术语和定义词汇表

Insulators — Glossary of terms and definitions

KS C 3836-2014(2019) 球窝式悬式绝缘子

Ball and socket type suspension insulator

KS C IEC 61211-2014(2019) 陶瓷材料或玻璃绝缘子 用于标称电压大于1 000 V的架空线 - 空气中的脉冲穿刺测试

Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V — Impulse puncture testing in air

KS C IEC 61109:2014 额定电压大于1000V的交流架空电线复合绝缘子的定义 试验方法和验收准则

Composite insulators for a.c. overhead lines with a nominal voltage greater than 1 000 V — Definitions, test methods and acceptance criteria

KS C IEC 62223-2014(2019) 绝缘子 - 词汇表和定义

Insulators — Glossary of terms and definitions

GSO IEC 61325:2014 标称电压大于 1000 V 的架空线路绝缘子 直流系统的陶瓷或玻璃绝缘子单元 定义、测试方法和验收标准

This International Standard is applicable to string insulator units of ceramic material or glass for use on d.c. overhead power lines with a nominal voltage greater than 1 000 V. It is not applicable to composite insulators. The application of this standard to insulators for use in other situations under d.c. voltage will be left to the relevant technical committees. This standard specifies: - the characteristics of insulators; - the conditions under which the specified values of these characteristics shall be verified; - acceptance criteria. It specifies basic characteristic tests in a manner similar to that of IEC 383-1. Certain additional tests have been found to be necessary to ensure satisfactory long-term performance of d.c. insulators. At present, these additional tests concern only cap and pin insulators. In view of the lack of significant performance data regarding long rod insulators on d.c. lines, it is not possible at present to define or validate special d.c.-oriented tests for such insulators. This standard does not include requirements, or special tests, dealing with the choice of insulators for specific operating conditions (e.g. ageing arising from specific operating conditions). NOTES 1 This standard does not include radio interference tests, artificial pollution tests or tests on insulator sets. These subjects and some relevant test methods are dealt with in the following IEC Publications: IEC 383-2, IEC 437 and IEC 1245. 2 Many of the requirements and tests in this standard are relevant to insulators for use on d.c. traction lines, but other tests may be required. Reference can be made to IEC 383-1.

Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria

GSO IEC 60120:2014 绝缘子系列机组右球联轴器尺寸

This standard applies to string insulator units of the cap and pin and long rod types and their associated metal fittings.

Dimensions of ball and socket couplings of string insulator units

GSO IEC 60383-2:2014 标称电压高于 1000 V 的架空线路绝缘子 第2部分：交流系统用绝缘子串和绝缘子单元 定义、试验方法和验收标准

This part of IEC 383 applies to insulator strings and insulator sets comprising string insulator units of ceramic material . or glass for use on a.c. overhead power lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. This part of IEC 383 also applies to insulator strings and insulator sets for use on d.c. overhead electric traction lines. This part of IEC 383 also applies to insulator strings and insulator sets of similar design when used in substations. It may be regarded as a provisional standard for insulator strings and insulator sets for use on d.c. overhead power lines and for composite insulator sets. The object of this part of IEC 383 is to prescribe standard electrical test procedures and acceptance criteria to verify the defined characteristics of insulator strings and insulator sets falling within the scope of the part of IEC 383. These tests and characteristics are intended to give a common base to designers, users and suppliers of overhead lines, insulators and line equipment when definition, evaluation or verification of the electrical characteristics of such equipment is required. These tests are not intended to be mandatory tests on insulators whether supplied individually or as strings or as sets. NOTES 1 Tests on string insulator units are dealt with in IEC 383-1. Tests on composite insulators are dealt with in IEC 1109. 2 This part does not include artificial pollution or radio-interference tests. These subjects and relevant test methods are dealt with in the following IEC reports: IEC 437: Report — radio interference test on high-voltage insulators. IEC 507: Report — artificial pollution tests on high-voltage insulators to be used on a.c. systems. 3 Power arc tests are currently under study.

Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria

GSO IEC 61467:2014 架空线路绝缘子 标称电压高于 1000 V 线路的绝缘子紧固件和组件 交流电弧测试

This International Standard applies to insulator strings and sets comprising string insulator units of ceramic material, glass or composite material for use on a.c. overhead lines and traction lines with a nominal voltage above 1 000 V and a frequency between 15 Hz and 100 Hz. This standard also applies to insulator strings or sets of similar design used in substations. This standard establishes a standard test procedure for power arc tests on insulator sets. It also establishes a standard test procedure for power arc tests on short strings. This standard does not apply to insulator sets mounted on non-metallic poles or towers. This standard cannot be directly applied to line post insulators or sets, or to insulating structures such as braced line-posts, since their mounting arrangement cannot be reproduced by the standard arrangements as described herein. However, this standard can be used as a basis for agreement for tests on such insulators and arrangements. The object of this standard is – to define the terms used, – to prescribe a standard test procedure, – to prescribe criteria to evaluate the results of the tests. Power arc tests are not an obligatory element of line insulator specifications. The standard test procedures and the evaluation criteria described in this standard are intended to provide testing guidance when power arc tests are felt to be necessary. It is not the object of this standard to introduce a general obligation to execute these tests.

Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power arc tests

GSO IEC 62217:2014 室内和室外用聚合物高压绝缘子 一般定义、测试方法和验收标准

This International Standard is applicable to polymeric insulators whose insulating body consists of one or various organic materials. Polymeric insulators covered by this standard include both solid core and hollow insulators. They are intended for use on HV overhead lines and in indoor and outdoor equipment. The object of this standard is – to define the common terms used for polymeric insulators; – to prescribe common test methods for design tests on polymeric insulators; – to prescribe acceptance or failure criteria, if applicable; These tests, criteria and recommendations are intended to ensure a satisfactory life-time under normal operating and environmental conditions (see Clause 5). This standard shall only be applied in conjunction with the relevant product standard.

Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria