29.080.10 绝缘子 标准查询与下载

IEC 62772:2016 带变压器的复合中空核心站后绝缘子 电压大于1000 V 直流电压电压大于1 500 V.定义 测试方法和验收标准

"This International Standard applies to composite hollow core station post insulators consisting of a load-bearing insulating tube (core) made of resin impregnated fibres an insulating filler material (e.g. solid@ liquid@ foam@ gaseous ?C pressurized or unpressurized)@ a housing (outside the insulating tube) made of polymeric material (for example silicone or ethylene-propylene) and metal fixing devices at the ends of the insulating tube. Composite hollow core station post insulators as defined in this standard are intended for general use in substations in both@ outdoor and indoor environments@ operating with a rated AC voltage greater than 1 000 V and a frequency not greater than 100 Hz or for use in direct current systems with a rated voltage greater than 1 500 V. The object of this standard is: ?C to define the terms used; ?C to prescribe test methods; ?C to prescribe acceptance criteria. All the tests in this standard@ apart from the thermal-mechanical test@ are performed at normal ambient temperature. This standard does not prescribe tests that may be characteristic of the apparatus of which the composite hollow core station post insulator ultimately may form a part. Further technical input is required in this area. NOTE 1 ""Pressurized"" means a permanent gas or liquid pressure greater than 0@05 MPa (0@5 bar) gauge. The gas can be dry air or inert gases@ for example sulphur hexafluoride@ nitrogen@ or a mixture of such gases. NOTE 2 ""Unpressurized"" means a gas or liquid pressure smaller than or equal to 0@05 MPa (0@5 bar) gauge. "

Composite hollow core station post insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V - Definitions, test methods and acceptance criteria

DIN EN 62231-1:2016 交流电压大于1000 V小于等于245 kV的变电站用复合固定柱形绝缘子.第1部分:尺寸,机械和电气特性(IEC 62231-1-2015).德文版本EN 62231-1-2016

Composite station post insulators for substations with AC voltages greater than 1000 V up to 245 kV - Part 1: Dimensional, mechanical and electrical characteristics (IEC 62231-1:2015); German version EN 62231-1:2016

EN 61466-1:2016 标称电压高于1KV的高架线用复合串式绝缘子.第1部分:标准强度级别和终端配件

Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V - Part 1: Standard strength classes and end fittings

BS PD IEC/TS 62073:2016 绝缘子表面疏水性的测量指南

Guidance on the measurement of hydrophobicity of insulator surfaces

DL/T 1579-2016 棒形悬式复合绝缘子用端部装配件技术规范

Technical specification for end fittings for rod suspension composite insulators

DL/T 1580-2016 交、直流棒形悬式复合绝缘子用芯棒技术规范

本部分规定了交、直流棒形悬式复合绝缘子用芯棒的技术要求、检验规则、试验方法、包装与运输等。 本部分适用于交、直流系统架空线路、变电站或换流站用棒形悬式复合绝缘子、相间复合绝缘子(以下简称绝缘子)。

Technical specification for core of long rod composite insulators for a. c. or d. c. systems

DL/T 1581-2016 直流系统用盘形悬式瓷或玻璃绝缘子金属附件加速电解腐蚀试验方法

Accelerated electrolytic corrosion test method for metal accessories of disc suspension porcelain or glass insulators for direct current systems

IEC TS 62073:2016 绝缘子表面疏水性的测量指南

The methods described in this technical specification can be used for the measurement of the hydrophobicity of the shed and housing material of composite insulators for overhead lines, substations and equipment or ceramic insulators covered or not covered by a coating. The obtained value represents the hydrophobicity at the time of the measurement. The object of this technical specification is to describe three methods that can be used to determine the hydrophobicity of insulators. The determination of the ability of water to wet the surface of insulators may be useful to evaluate the condition of the surface of insulators in service, or as part of the insulator testing in the laboratory.

Guidance on the measurement of hydrophobicity of insulator surfaces

BS EN 62231-1:2016 交流电压大于1000 V小于等于245 kV的变电站用复合固定柱形绝缘子.尺寸,机械和电气特性

Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV. Dimensional, mechanical and electrical characteristics

EN 62231-1:2016 交流电压大于 1000 V 至 245 kV 的变电站用复合站柱绝缘子 第1部分：尺寸、机械和电气特性

IEC 62231-1:2015 specifies main dimensions and values for mechanical and electrical characteristics of composite station post insulators.

Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV - Part 1: Dimensional, mechanical and electrical characteristics

SNI IEC 60507:2016 交流系统用高压陶瓷和玻璃绝缘子人工污染试验

Uji polusi buatan pada insulator keramik dan gelas tegangan tinggi yang digunakan pada sistem arus bolak balik

SNI IEC 62217:2016 室内和室外用高压聚合物绝缘子 一般定义、试验方法和验收标准

Insulator polimer tegangan tinggi untuk pasangan dalam dan luar - definisi umum, metode pengujian dan kriteria keberterimaan

IEC TS 62896:2015 高压用交流和直流混合绝缘子.定义、试验方法和验收标准

Hybrid insulators for a.c. and d.c. for high-voltage applications - Definitions, test methods and acceptance criteria

IEC 62231-1:2015 组合站用于变压器的绝缘子 电压大于1 000 V至245 Kv - 第1部分:尺寸 机械和电气特性

Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV - Part 1: Dimensional, mechanical and electrical characteristics

GSO IEC/TR 62730:2015 室内外使用的高压聚合物绝缘子 通过卷轴测试和 5000 小时测试进行腐蚀测试

This technical report is applicable to polymeric insulators whose insulating body consists of one or various organic materials. Polymeric insulators covered by this technical report include both solid core and hollow insulators. They are intended for use on overhead lines and in indoor and outdoor equipment with a rated voltage greater than 1 000 V. The object of this technical report is: – to define the common terms used; – to give the background behind the development and use of the 5 000 h multiple stress test and the tracking wheel test; – to describe the test methods for the 5 000 h multiple stress test and the tracking wheel tests on polymeric insulators; – to describe possible acceptance or failure criteria, if applicable; These tests, criteria and recommendations are intended to give a common basis for the 5 000h multiple stress test and the tracking wheel test when they are used for research or required as a supplementary design test. These tests are not mandatory and their use is subject to prior agreement between the interested parties.

HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test

DL/T 1469-2015 输变电设备外绝缘用硅橡胶辅助伞裙使用导则

本标准规定了输变电设备外绝缘用硅橡胶辅助伞裙(简称辅助伞裙)的基本技术要求、检验规则、包装与贮存、施工、验收及运行维护等。 本标准适用于110kV及以上交直流系统、环境温度-40℃~+40℃、海拔1000m以下条件下运行的输变电设备(包括支柱绝缘子、套管和盘形悬式绝缘子等，不包括避雷器)外绝缘用硅橡胶辅助伞裙。

Application guide of auxiliary silicone rubber shed for transmission and substation equipment external insulation

DL/T 626-2015 劣化悬式绝缘子检测规程

本标准规定了交流、直流电力系统用悬式绝缘子在安装、运行中进行检测的一般技术要求、检测方法及判定准则。 本标准适用于标称电压高于1000V的交流、直流架空电力线路、发电厂、变电站及换流站用盘形悬式瓷、玻璃绝缘子和棒形悬式复合绝缘子（以下简称绝缘子）。

Aging suspension insulators inspection rule

DL/T 1472.1-2015 换流站直流场用支柱绝缘子 第1部分：技术条件

Post insulators for DC field of converter stations Part 1: Specifications

DL/T 1470-2015 交流系统用盘形悬式复合瓷或玻璃绝缘子串元件

本标准规定了标称电压高于1000V、频率为50Hz的交流系统用盘形悬式复合瓷或玻璃绝缘子串元件的型号及结构尺寸、技术要求、检验规则、试验方法、验收、包装、运输和储存。 本标准适用于交流架空电力线路、发电厂及变电站用盘形悬式复合瓷或玻璃绝缘子（简称绝缘子）。

Cap and pin suspension ceramic or glass string insulators unit with composite shed for a.c. systems

DL/T 1471-2015 高压直流线路用盘形悬式复合瓷或玻璃绝缘子串元件

本标准规定了高压直流线路用盘形悬式复合瓷或玻璃绝缘子串元件的型号及结构尺寸、技术要求、检验规则、试验方法、验收、包装、运输和储存。 本标准适用于标称电压高于1500V的直流架空电力线路用盘形悬式复合瓷或玻璃绝缘子（以下简称绝缘子）。

Cap and pin suspension ceramic or glass string insulators unit with composite shed for high voltage d.c. systems