29.080.20 套管 标准查询与下载

DIN EN 50180 Bb.1:2005 充液式变压器用大于1kV小于等于36kV的250A到315KA的套管

Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers - Constructional details of components

DIN EN 50262:2005 电气装置用电缆密封套

Cable glands for electrical installations; German version EN 50262:1998 + A1:2001 + A2:2004

DS/EN 50262/A2:2005 电气装置的电缆密封套

This standard provides requirements and tests for the construction and performance of cable glands. This standard covers complete glands as supplied by the manufacturer or supplier, but not parts of cable glands.

Cable glands for electrical installations

ANSI/IEEE C57.19.00:2004 电力装置套管的标准一般要求和试验程序

Applies to power apparatus bushings that have basic impulse insulation levels of 110 kV and above for use as components of oil-filled transformers and oil-filled reactors. Defines the special terms used, service conditions, rating, general requirements, and test procedure for apparatus bushings.

Standard General Requirements and Test Procedure for Power Apparatus Bushings

DIN EN 62199:2005 直流装置套管

Bushings for d.c. application (IEC 62199:2004); German version EN 62199:2004

LST EN 50262+AC-2001/A2-2005 用于电气安装的公制电缆密封套

Metric cable glands for electrical installations

NF C68-302/A2:2005 电气设备的电缆密封垫

Cable glands for electrical installations.

ANSI/IEEE C57.19.03:1996/Cor 1:2005 直流装置用套管的标准要求、术语和试验规程

Corrects errors in the base standard.

Standard Requirements, Terminology, and Test Code for Bushings for DC Applications - Corrigendum 1

IEEE Std C57.19.03/COR 1-2005 直流装置用套管的要求、术语和试验规程.勘误1

IEEE C 57.19.03 Technical Corrigenda

Requirements, Terminology and Test Code for Bushings for DC Applications; Corrigendum 1

LST EN 62199-2004 直流应用套管（IEC 62199:2004）

Bushings for d.c. application (IEC 62199:2004)

NF C66-557*NF EN 50243:2004 充液变压器用 24 kV、36 kV、5 kA 和 8 kA 的户外套管

Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers.

NF C52-099:2004 直流装置套管

Bushings for d.c. application.

DS/EN 62199:2004 直流应用套管

This International Standard applies to outdoor and indoor bushings of any voltage used on d.c. systems, of capacitance graded or gas insulated types for use as components of oil-filled converter transformers and smoothing reactors, as well as air-to-air d.c. bushings. This standard does not apply to the following: - Cable terminations (potheads) - Bushings for instrument transformers - Bushings for test transformers - Bushings applied with gaseous insulation (other than air at atmospheric pressure) external to the bushing - Bushings for industrial application - Bushings for traction application. This standard makes reference to IEC 60137 for general terms a

Bushings for d.c. application

BS EN 62199:2004 直流套管

This International Standard applies to outdoor and indoor bushings of any voltage used on d.c. systems, of capacitance graded or gas insulated types for use as components of oil-filled converter transformers and smoothing reactors, as well as air-to-air d.c. bushings. This standard does not apply to the following: · cable terminations (potheads); · bushings for instrument transformers; · bushings for test transformers; · bushings applied with gaseous insulation (other than air at atmospheric pressure) external to the bushing; · bushings for industrial application; · bushings for traction application. This standard makes reference to IEC 60137 for general terms and conditions and defines the special terms used, operating conditions, ratings, test procedures as well as general mechanical and electrical requirements for bushings for d.c. application. Where applicable, reference can also be made to IEC 61462 for composite insulators - hollow insulators for use in outdoor and indoor electrical equipment and to IEC 62155 for hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V.

Bushings for D.C. application

IEC 62199:2004 直流装置套管

Applies to outdoor and indoor bushings of any voltage used on d.c. systems, of capacitance graded or gas insulated types for use as components of oil-filled converter transformers and smoothing reactors, as well as air-to-air d.c. bushings.

Bushings for d.c. application

NF C66-550:2004 交流电压1000V以上用绝缘套管

Insulated bushings for alternating voltages above 1 000 V.

DIN EN 50387:2004 液浸式变压器用1kV及以下且1.25 KA至5 kA的母线套管

Busbar bushings up to 1 kV and from 1,25 kA to 5 kA, for liquid filled transformers; German version EN 50387:2002

DIN EN 50386:2004 液浸式变压器用1kV及以下且250 A至5 kA的套管

This standard is applicable to ceramic insulated bushings for rated voltages up to 1 kV, rated currents from 250 A up to 5 kA and frequencies from 15 Hz up to 60 Hz for insulating liquid filled transformers.#,,#

Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers; German version EN 50386:2002

SANS 60137:2004 1000V以上交流电压用绝缘套管

This International Standard specifies the characteristics and tests for insulated bushings. This standard is applicable to bushings, as defined in Clause 3, intended for use in electrical apparatus, machinery, transformers, switchgear and installations for three-phase alternating current systems, having highest voltage for equipment above 1000 V and power frequencies of 15 Hz up to and including 60 Hz. Subject to special agreement between purchaser and supplier, this standard may be applied, in part or as a whole, to the following: □ bushings used in other than three-phase systems; □ bushings for high-voltage, direct current systems; □ bushings for testing transformers; □ terminals for power cables (potheads); □ bushings for capacitors. Special requirements and tests for transformer bushings in this standard apply also to reactor bushings. This standard is applicable to bushings made and sold separately. Bushings which are a part of an apparatus and which cannot be tested according to this standard, should be tested with the apparatus of which they form part.

Insulated bushings for alternating voltages above 1 000 V

BS EN 60137:2003 交流电压1000V以上绝缘套管

This International Standard specifies the characteristics and tests for insulated bushings. This standard is applicable to bushings, as defined in Clause 3, intended for use in electrical apparatus, machinery, transformers, switchgear and installations for three-phase alternating current systems, having highest voltage for equipment above 1 000 V and power frequencies of 15 Hz up to and including 60 Hz. Subject to special agreement between purchaser and supplier, this standard may be applied, in part or as a whole, to the following: · bushings used in other than three-phase systems; · bushings for high-voltage, direct current systems; · bushings for testing transformers; · terminals for power cables (potheads); · bushings for capacitors. Special requirements and tests for transformer bushings in this standard apply also to reactor bushings. This standard is applicable to bushings made and sold separately. Bushings which are a part of an apparatus and which cannot be tested according to this standard, should be tested with the apparatus of which they form part.

Insulated bushings for alternating voltages above 1000 V