31.240 电子设备用机械构件 标准查询与下载

EN IEC 60917-1:2019 用于电气和电子设备实践的机械结构开发的模块化顺序 第1部分：通用标准

IEC 60917-1:2019 is available as IEC 60917-1:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60917-1:2019 specifies the relationships between equipment practices and the modular order which are applicable to the main structural dimensions of electronic and electrical equipment mounted in various installations where dimensional interfaces have to be considered for mechanical compatibility. This document also established terms for parts and assemblies of mechanical structures for electrical and electronic equipment, to clarify the specific relations between equipment practices and modular order. This second edition cancels and replaces the first edition published in 1998 and its Amendment 1:2000. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) added information on newly developed detail specification standards of mechanical structures for the electrical and electronic equipment practices; b) added information on newly developed performance test standards for the verifications of environmental performances and safety aspects and issues of the thermal performance and thermal management for the electrical and electronic equipment practices; c) introduced the relations between the mechanical structure for electrical and electronic system, the verification of environmental performance and safety aspects and issues of the thermal performance and thermal management for the electrical and electronic equipment practices. Key words: IT Cabinets, Mechanical Structures

Modular order for the development of mechanical structures for electrical and electronic equipment practices - Part 1: Generic standard

IEC TR 60286-7:2019 自动搬运部件的包装.第7部分:小型部件用散装泡罩包装的介绍

Packaging of components for automatic handling - Part 7: Introduction of a bulk blister pack for miniaturized components

IEC 60917-1:2019 用于电气和电子设备实践的机械结构开发的模块化顺序 第1部分：通用标准

Modular order for the development of mechanical structures for electrical and electronic equipment practices - Part 1: Generic standard

BS EN IEC 62966-1:2019 电气和电子设备的机械结构 IT 机柜的通道封闭 尺寸和机械要求

What is BS EN IEC 62966-1 - Aisle containments about ?   BS EN IEC 62966 series discusses mechanical structures for electrical and electronic equipment for aisle containment. BS EN IEC 62966-1 is the first part of a series of documents and an international standard for mechanical structures for electrical and electronic equipment. BS EN IEC 62966-1 specifies the dimensions and mechanical requirements for IT cabinets which helps in stipulating the properties and requirements of aisle containment.   The cabinets concerned are dealt with in the standard series IEC 60297 and IEC 60917 .   Who is BS E...

Mechanical structures for electrical and electronic equipment. Aisle containment for IT cabinets - Dimensions and mechanical requirements

IEC 62966-1:2019 电气和电子设备的机械结构.IT机柜的通道安全壳.第1部分:尺寸和机械要求

Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 1: Dimensions and mechanical requirements

IEC 60286-3:2019 RLV 自动搬运部件的包装.第3部分:连续胶带上表面安装部件的包装

Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes

IEC 60286-3:2019 自动处理组件的包装 - 第3部分:连续胶带上表面贴装组件的包装

This part of IEC 60286 is applicable to the tape packaging of electronic components without leads or with lead stumps@ intended to be connected to electronic circuits. It includes only those dimensions that are essential for the taping of components intended for the abovementioned purposes. This document also includes requirements related to the packaging of singulated die products including bare die and bumped die (flip chips).

Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes

T/ZZB 0917-2018 工业机械锁

本标准规定了工业机械锁的术语和定义、产品分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存、质量承诺等。 本标准适用于工业机械锁（以下简称锁或产品）。 本标准不适用于建筑五金锁。 

Industrial mechanical lock

T/ZZB 0819-2018 机柜电控锁

本标准规定了机柜电控锁（本文简称“机柜锁”）的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本标准适用于机柜电控锁。

Cabinet electric control lock

BS EN IEC 60297-3-110:2018 电气和电子设备的机械结构 482.6 毫米（19 英寸）系列机械结构尺寸 智能住宅住宅机架和机柜

What is BS EN IEC 60297-3-110 about?    BS EN IEC 60297-3-110 discusses mechanical structures for electrical and electronic. BS EN IEC 60297-3-110 specifies dimensions, specifications for installation, environmental aspects and safety aspect of residential racks and cabinets based on IEC 60297 series, for   smart houses, likely to be part of smart cities. BS EN IEC 60297-3-110 details dimensions of residential racks and cabinets which ensures safe and reliable operations of the equipment.   Who is BS EN IEC 60297-3-110 for?   BS EN IEC 60297-3-110 on residential racks and cabinets is useful for:  

Mechanical structures for electrical and electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) series - Residential racks and cabinets for smart houses

IEC 61191-1:2018 RLV 印制板组件.第1部分:总规范.使用表面安装和相关组装技术的焊接电气和电子组件的要求

Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies

IEC 60297-3-110:2018 电气和电子设备的机械结构 482.6 毫米（19 英寸）系列机械结构的尺寸 第 3-110 部分：智能住宅的住宅机架和机柜

This part of IEC 60297 specifies dimensions, specification for installation, environmental aspects and safety aspect of residential racks and cabinets based on IEC 60297 series, for smart houses, likely to be part of smart cities.

Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-110: Residential racks and cabinets for smart houses

BS EN IEC 62610-2:2018 电气和电子设备的机械结构 机柜的热管理符合IEC 60297和IEC 60917系列 强制空气冷却结构的确定方法

Mechanical structures for electrical and electronic equipment. Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series. Method for the determination of forced air cooling structure

EN IEC 62610-2:2018 电气和电子设备的机械结构 符合 IEC 60297 和 IEC 60917 系列的机柜热管理 第2部分：强制风冷的测定方法

Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling

IEC 62610-2:2018 电气和电子设备的机械结构.依据IEC 60297和IEC 60917系列的机柜热管理.第2部分:强制风冷的测定方法

This part of IEC 62610 provides for compatible methods of configuring forced air cooled cabinets assembled with associated subracks and/or chassis in accordance with the IEC 60297 and IEC 60917 series. This document contains the following: a) thermal interfaces of subracks and/or chassis-based equipment in a cabinet, described by: reference temperature; preferred airflow conditions; airflow volume conditions; standard air; b) procedures for determining compatible forced airflow conditions in a cabinet by applying typical thermal interface conditions. The drawings used are not intended to indicate product design. They are only for explanatory indications for determining forced air cooling.

Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling

EN 61191-4:2017 印制板组装.第4部分:分规范.引出端焊接组装的要求

IEC 61191-4:2017(E) prescribes requirements for terminal soldered assemblies. The requirements pertain to those assemblies that are entirely terminal/wire interconnecting structures or to the terminal/wire portions of those assemblies that include other related technologies (i.e. surface mounting, through-hole mounting, chip mounting). This edition includes the following significant technical changes with respect to the previous edition: The requirements have been updated to be compliant with the acceptance criteria in IPC‑A-610F.

Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies

GSO IEC 61587-5:2017 电子设备机械结构 IEC 60917 和 IEC 60297 测试 第5部分：底盘、子架和插件的抗震测试

This part of IEC 61587 specifies seismic test requirements for chassis, subracks, and plug-in units as defined in the IEC 60297 and IEC 60917 series. It applies in whole or in part, only to the mechanical structures of chassis, subracks, and plug-in units for electronic equipment, according to the IEC 60297 and IEC 60917 series, and does not apply to electronic components, equipment or systems within the mechanical structures. NOTE Subracks may be an integral part of a chassis (often called in the industry a shelf or a crate). The object of this standard is to establish a level of physical integrity of chassis, subracks, and plug-in units according to IEC 60297 and IEC 60917 series that may provide a level of survivability that will preserve functionality during and after a seismic occurrence. It is intended to provide the user with a high level of confidence in the selection of an equipment practice to meet such needs. Since IEC 60297 and IEC 60917 series chassis, subracks, and plug-in units come in many sizes, weights and mechanical complexities, it is not possible to define a single minimum seismic test requirement for all weight categories. Therefore, overall mass categories are defined in this standard. However, the mass distribution inside a chassis and subrack is considered “application-specific” and herein defined as “intended use”. The single-axis or tri-axis acceleration for the seismic testing is selectable.

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5: Seismic tests for chassis, subracks and plug-in units

GSO IEC 62610-4:2017 电子设备的机械结构 符合 IEC 60297 和 IEC 60917 系列的机柜热管理 第4部分：电子机柜中供水热交换器的冷却性能测试

This part of IEC 62610 specifies the test setup and test parameters for water supplied heat exchangers within single electronic cabinet configurations. The tests are focused on cabinets for the installation of high power dissipation electronic equipment. The cabinets concerned are from the IEC 60297 (19 in) and IEC 60917 (25 mm) series. The purpose of this standard is to provide comparable data for the cooling performance of cabinets according to defined test setups and cooling parameters.

Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 4: Cooling performance tests for water supplied heat exchangers in electronic cabinets

GSO IEC 61587-4:2017 电子设备机械结构 IEC 60917 和 IEC 60297 系列测试 第4部分：模块化机柜性能水平的组合

This part of IEC 61587 provides the combinations of different degrees of protection for cabinet systems regarding IP code, climate levels, static and dynamics load tests, electromagnetic shielding and seismic requirements. Optimal economical solution can be ensured by ordering a cabinet with specific properties for which this design guide provides the easy selection of defined performance levels.

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 4: Combination of performance levels for modular cabinets

GSO IEC 60297-3-106:2017 电子设备的机械结构 482.6 毫米（19 英寸）系列机械结构的尺寸 第3-106部分：符合 IEC 60917-2-1 的公制机柜或机架适用的子架和底盘的适配尺寸

This part of IEC 60297 specifies dimensions for mounting flanges of 19 in subracks or chassis that are to be mounted into metric cabinets or racks. Additional dimensions for subracks or chassis are according to the IEC 60297 series, and for metric cabinets or racks to the IEC 60917 series. EMC, seismic, climatic and environmental requirements and tests, are defined in the IEC 61587 series. The drawings used in this standard are not intended to indicate product design, only the specific dimensions that should be used. The terminology used complies with IEC 60917-1.

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1