39.020 精密机械 标准查询与下载
共找到 95 条与 精密机械 相关的标准，共 7 页
Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 4: Specimen for optical procedures
- ICS
- 39.020
- CCS
- 发布
- 2015-06
- 实施
Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 1: Qualitative estimation of the material and procedure specific influences
- ICS
- 39.020
- CCS
- 发布
- 2015-06
- 实施
本标准规定了乘用车用便携式轮胎充气机（以下简称充气机）的分类、型号、基本参数、要求、试验方法、检验规则、标志、包装、运输及贮存要求。 本标准适用于由乘用车车载电源或自备电源供电的，额定电流为4A~40A的，额定排气压力为0.24MPa~0.8MPa的乘用车用便携式轮胎充气机。其他车型用便携式轮胎充气机可参照使用。
Portable tire inflators for passenger cars
- ICS
- 39.020
- CCS
- N
- 发布
- 2014-11-10
- 实施
- 2015-02-10
Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 3: Derivation of correction values for tactile measuring devices
- ICS
- 39.020
- CCS
- N04
- 发布
- 2014-10
- 实施
Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 2: Specimen for tactile procedures
- ICS
- 39.020
- CCS
- N04
- 发布
- 2014-10
- 实施
Ultra-precision air bearing spindle technical requirements
- ICS
- 39.020
- CCS
- A52
- 发布
- 2014-01-23
- 实施
- 2014-02-23
Basic technical requirements of precise single-axis air bearing axis angle measurement turntable
- ICS
- 39.020
- CCS
- A52
- 发布
- 2014-01-23
- 实施
- 2014-02-23
Basic requirements for high-speed air-floating electric spindle technology
- ICS
- 39.020
- CCS
- A52
- 发布
- 2014-01-23
- 实施
- 2014-02-23
Ultra-precision air bearing technical requirements
- ICS
- 39.020
- CCS
- A52
- 发布
- 2014-01-23
- 实施
- 2014-02-23
이 표준은 시계 및 광학 기계 등을 조립할 때 작은 나사를 죄고 푸는 데 사용하는 정밀 기
Screwdrivers for slotted screws, for fine mechanics
- ICS
- 39.020
- CCS
- J40
- 发布
- 2012-11-01
- 实施
- 2012-11-01
Screwdrivers for slotted screws, for fine mechanics
- ICS
- 39.020
- CCS
- 发布
- 2012-11-01
- 实施
Screwdrivers for slotted screws, for fine mechanics
- ICS
- 39.020
- CCS
- 发布
- 2012-11-01
- 实施
Production equipment for microsystems - Tray - Dimensions and tolerances
- ICS
- 39.020
- CCS
- N04
- 发布
- 2012-07
- 实施
Production equipment for microsystems - Interface between grippers and handling system
- ICS
- 39.020
- CCS
- P80
- 发布
- 2007-10
- 实施
本标准规定了石油化工精密仪器及配套仪器抗震鉴定和减震措施要求^】 本标准适尸于抗震设防烈度为6度~9度地茎的石油化工企业在役精密仪器及配套仪器的抗震鉴定 和力口古，不适乒 于抗震设防烈度大二9度地茎的石油化工在役精密仪器及配套仪器的抗震鉴定和加古。
Standard of aseismic evaluation for precision instrument in petrochemical industry
- ICS
- 39.020
- CCS
- P72
- 发布
- 2004-10-20
- 实施
- 2005-04-01
This Standard applies to trays which take workpeaces orderly and which can be used for storage, transport and handling with standardized handling systems and production equipment of semiconductors. This Standard specifies a uniform external design, dimensions and tolerances as well as the designation and the area for marking of those trays.
Production equipment for microsystems - Tray - Dimensions and tolerances
- ICS
- 39.020
- CCS
- N04
- 发布
- 2003-09
- 实施
Das Dokument gibt eine Übersicht über formschlüssige Verbindungen, sie sind lösbar oder unlösbar. Es sind im allgemeinen unmittelbare Verbindungen. Sie sind so zu gestalten, daß die Teile beim Fügen elastisch verformt werden können und durch Eingriff eines Vorsprunges in eine Hinterschneidung durch Einrasten (Schnappen) verbunden werden.*www.vdi.de/2251
Precision engineering components - Snap connections
- ICS
- 39.020
- CCS
- 发布
- 1998-09
- 实施
Ziel dieser Richtlinie ist es, durch Zusammenfassung der Grundlagen des Lötens (Begriffe, Klassifikationen, Prozeßabläufe, Einflußparameter, Konstruktionsprinzipe) dem Praktiker den Einstieg in sein zu lösendes Problem zu erleichtern und Voraussetzungen zu schaffen, es in Verbindung mit dem Schrifttum systemorientiert zu lösen.*www.vdi.de/2251
Precision engineering components - Solder connections
- ICS
- 39.020
- CCS
- 发布
- 1998-09
- 实施
This Commerc:ial Item Description covers the requirements for a sterile, pyrogen free, disposable arterial blood gas and pressure monitoring tjet suitable for use in operating rooms and intensive care units.
MONITORING SET, ARTERIAL BLOOD GAS SAMPLING AND PRESSURE
- ICS
- 39.020
- CCS
- C27
- 发布
- 1994-07-15
- 实施
The General Services Administration has authorized the use of this Commercial Item Description as a replacement for Interim for Federal Specification GG-N-00195B (DSADM), which is cancelled.
NEEDLE, HYPODERMIC, BLOOD COLLECTING
- ICS
- 39.020
- CCS
- C27
- 发布
- 1994-01-31
- 实施
