45.040 铁路工程材料和零件 标准查询与下载
共找到 639 条与 铁路工程材料和零件 相关的标准，共 43 页
Railway applications - Automatic coupler - Performance requirements, specific interface geometry and test method; German version EN 16019:2014
- ICS
- 45.040
- CCS
- S31
- 发布
- 2014-06
- 实施
Railway applications - Slack adjuster; German version EN 16241:2014
- ICS
- 45.040
- CCS
- S12
- 发布
- 2014-06
- 实施
Railway applications. Automatic coupler. Performance requirements, specific interface geometry and test method
- ICS
- 45.040
- CCS
- S10
- 发布
- 2014-04-30
- 实施
- 2014-04-30
This European Standard specifies the requirements for Type 10 automatic couplers for railway applications. It defines the minimum interface requirements in order to allow automatic coupling (mechanical and pneumatic) of two Type 10 automatic couplers. The interfaces of the end coupler specified in this European Standard:- enable the rescue of a train set in an event of a breakdown by another trainset of different type, without the need to use an intermediate coupler adapter, accessories or component; - are the reference interfaces to which the rescue coupler defined by EN 15020 will comply. It does not define; - interface requirements concerning electrical connections; - clearance requirements around the coupler head; - the height above top of rail for the coupler; - the position of the pivot point of the coupler.
Railway applications - Automatic coupler - Performance requirements@ specific interface geometry and test method
- ICS
- 45.040
- CCS
- S34
- 发布
- 2014-03
- 实施
Railway applications - Suspension components - Hydraulic dampers; German version EN 13802:2013
- ICS
- 45.040
- CCS
- S50
- 发布
- 2014-03
- 实施
Railway applications. Slack adjuster
- ICS
- 45.040
- CCS
- S39
- 发布
- 2014-02-28
- 实施
- 2014-02-28
This European Standard establishes general principles for designing, manufacturing and type testing slack adjusters. NOTE 1 These requirements cannot be written in sufficient detail to ensure good workmanship or proper construction. Each manufacturer is therefore responsible for taking every necessary step to make sure that the quality of workmanship and construction is such as to ensure accordance with good engineering practice. It is applicable to double acting slack adjusters designed to control the block (shoe) to tread (wheel) clearance of tread braked vehicles with conventional brake cylinders and rigging, without taking the track-gauge into consideration. NOTE 2 The term used for this device by UIC is "Brake rigging adjuster".
Railway applications - Slack adjuster (Incorporates Amendment A1: 2016)
- ICS
- 45.040
- CCS
- S32
- 发布
- 2014-02
- 实施
Head current collection elements of pantographs of electric vehicle. General specification
- ICS
- 45.040
- CCS
- 发布
- 2014
- 实施
- 2015-09-01
Transmission tooth gears of the traction railway stock. Specifications
- ICS
- 45.040
- CCS
- 发布
- 2014
- 实施
- 2015-07-01
Railroad carrier cables of contact network. Specifications
- ICS
- 45.040
- CCS
- 发布
- 2014
- 实施
- 2015-06-01
Transmission tooth gears of the traction main railway stock. Scale of macro- and microstructure standards
- ICS
- 45.040
- CCS
- S33
- 发布
- 2014
- 实施
- 2015-07-01
Meggy type rubber-metal springs. Specifications
- ICS
- 45.040
- CCS
- J26
- 发布
- 2014
- 实施
- 2015-12-01
Railway applications. Suspension components. Hydraulic dampers
- ICS
- 45.040
- CCS
- S31
- 发布
- 2013-12-31
- 实施
- 2013-12-31
本标准规定了铁路桥梁球型支座的规格与分类, 结构形式和型号,技术要求,检验方法,检验规则,标志、包装、储存和运输,安装和养护。本标准适用于竖向设计承载力为1 000 kN ~ 100 000 kN 的铁路桥梁球型支座,其他桥梁及结构工程用球型支座可参考使用。
Spherical bearings for railway bridges
- ICS
- 45.040
- CCS
- S13
- 发布
- 2013-03-13
- 实施
- 2013-05-20
本标准规定了铁路用钢轨铝热焊接材料的术语和定义,技术要求,检验方法,检验规则,包装、标志及质量证明书。本标准适用于铁路用钢轨铝热焊接材料的性能验收及供货时的质量验收。
Alumino-thermic welding consumables for rail
- ICS
- 45.040
- CCS
- J33
- 发布
- 2013-03-13
- 实施
- 2013-07-01
本标准规定了铁路桥梁盆式支座的规格、分类、型号、结构形式、技术要求、检验方法、检验规则、标志、包装、储存和运输、安装和养护、调高及保修期。本标准适用于竖向设计承载力为1 000 kN ~ 60 000 kN、地震动峰值加速度值A不大于0. 3g地区使用的铁路桥梁盆式支座,其他桥梁及结构工程用盆式支座可参考使用。
Pot bearings for railway bridges
- ICS
- 45.040
- CCS
- S13
- 发布
- 2013-03-13
- 实施
- 2013-05-20
Railway applications - Wheelsets and bogies - Powered axles - Design method; German version EN 13104:2009+A2:2012
- ICS
- 45.040
- CCS
- S33
- 发布
- 2013-03
- 实施
Railway applications - Wheelsets and bogies - Wheels - Product requirements; German version EN 13262:2004+A2:2011; Corrigendum to DIN EN 13262:2011-06
- ICS
- 45.040
- CCS
- S33
- 发布
- 2013-02
- 实施
Railway applications - Wheelsets and bogies - Powered axles - Design method
- ICS
- 45.040
- CCS
- 发布
- 2013-01-31
- 实施
- 2013-01-31
Railway applications - Wheelsets and bogies - Powered axles - Design method
- ICS
- 45.040
- CCS
- S33
- 发布
- 2013-01-05
- 实施
- 2013-01-05
