47.020.01 造船和海上构筑物通用标准 标准查询与下载

BS ISO 19898:2019 船舶和海洋技术 救生设备和装置 人员寻回手段

What is ISO 19898 -  Means of recovery of persons  about?    ISO 19898  specifies requirements for the general performance, materials, stowage, marking and testing of recovery devices and systems, including specific appliances.  ISO 19898  also specifies requirements for the manufacturer concerning production, type approvals, instructions for use and accompanying documentation.   ISO 19898  is intended to assist in the selection of ship-specific recovery devices suitable for the purpose of safely recovering persons from the water or from survival craft.   Who is ISO 19898 -  Means of recovery of persons

Ships and marine technology. Life-saving appliances and arrangements. Means of recovery of persons

ISO 21173:2019 潜水器.静水压试验.耐压船体和浮力材料

This document specifies a test method for the hydrostatic pressure test for pressure hull and buoyancy materials of submersibles. The test sequence comprises a tightness test and the hydrostatic pressure test itself. It can also include continuous pressurization and depressurization tests, long-term static load and cycling external pressure tests. This document is applicable to the pressure structure of manned submersibles and unmanned submersibles, including the pressure hull, its accessories (such as viewports, hatches and connectors) and buoyancy materials. The long-term static load and cycling external pressure tests are only applicable to buoyancy material. This document is not applicable to submarines and other submersibles parking or operating underwater for more than one week.

Submersibles — Hydrostatic pressure test — Pressure hull and buoyancy materials

ISO 19898:2019 船舶和海洋技术救生设备和装置人员康复方法

This document specifies requirements for the general performance, materials, stowage, marking and testing of recovery devices and systems, including specific appliances. It also specifies requirements for the manufacturer concerning production, type approvals, instructions for use and accompanying documentation. It is intended to assist in the selection of ship-specific recovery devices suitable for the purpose of safely recovering persons from the water or from survival craft.

Ships and marine technology — Life-saving appliances and arrangements — Means of recovery of persons

CB/T 4497-2019 船舶行业变配电站、压缩空气站、气体供应间、锅炉房、泵站、油库及加油站、加油车、材料堆场、物资仓库安全要求

Safety requirements for substations, compressed air stations, gas supply rooms, boiler rooms, pump stations, oil depots and gas stations, refueling trucks, material yards, and material warehouses in the shipbuilding industry

BS ISO 19897:2019 船舶和海洋技术 海上疏散系统 结冰条件下测试

What is ISO 19897 -  Marine evacuation systems   about?    ISO 19897  provides specifications for a test of marine evacuation systems (MES) under conditions   of icing in support of the requirement of the International Life-saving Appliance (LSA) Code.   Who is ISO 19897 -  Marine evacuation systems   for?   ISO 19897  on  marine evacuation systems  is useful for:

Ships and marine technology. Marine evacuation systems. Testing under conditions of icing

ISO 19897:2019 船舶和海上技术.海上疏散系统.结冰条件下的试验

This document provides specifications for a test of marine evacuation systems (MES) under conditions of icing in support of the requirement in paragraph 6.2.2.1.8 of the International Life-saving Appliance (LSA) Code.

Ships and marine technology — Marine evacuation systems — Testing under conditions of icing

CB/T 4335-2019 船舶建造技术水平评估方法

Evaluation method of shipbuilding technical level

CB/T 3190-2019 钢质船体结构焊接坡口型式及尺寸

Welding groove type and size of steel hull structure

CB/T 4490-2019 船用配电板通电试验要求

Requirements for energization test of marine switchboard

CB/Z 343-2019 船用钢铁制件热浸镀锌

Hot-dip galvanizing of marine steel parts

CB/T 3802-2019 船体焊缝表面质量检验要求

Requirements for surface quality inspection of hull welds

CB/T 3909-2019 船舶电气设备安装工艺

Ship electrical equipment installation process

T/CSNAME 002-2019 船舶厂所协同设计设备模型库建模及管理技术要求

本标准规定了在船舶厂所协同设计过程中对船舶设备三维模型的建模要求、编码规则、建库规则及库管理等技术要求。

Requirements for equipment model library building and management in cooperative design of shipyard and institute

T/CSNAME 001-2019 船舶厂所协同设计船体结构通用建模技术要求

本标准规定了基于主流设计软件船舶厂所协同设计中船体结构三维建模所需遵循的一般要求、产品结构树层级及编码规则等。

General requirements for hull structure modeling in cooperative design of shipyard and institute

KS V ISO 17907:2019 常规油轮的单点系泊装置

Single point mooring arrangements for conventional tankers

KS V ISO 17907-2019 常规油轮的单点系泊装置

Single point mooring arrangements for conventional tankers

T/ZZB 0846-2018 聚乙烯滚塑船艇

本标准规定了聚乙烯滚塑船艇术语和定义、基本要求、结构与安装要求、技术要求、试验方法、检验规则、储存、运输、交付、质量承诺。 本标准适用于船长不大于12 m的聚乙烯滚塑船艇。

Polyethylene rotomolded boat

BS ISO 23048:2018 船舶和海洋技术 使用应变仪进行便携式功率测量的验证方法

Ships and marine technology. Verification method for portable power measurement using a strain gauge

ISO 23048:2018 船舶和海洋技术.使用应变计的便携式功率测量的验证方法

This document specifies a procedure for the verification of portable power measurement equipment using a strain gauge in the laboratory. The power measurement equipment verified in accordance with this document can be used on merchant ships.

Ships and marine technology - Verification method for portable power measurement using a strain gauge

T/ZJYTXH 001-2018 标准 浮体

本标准规定了标准浮体（以下简称浮体）的产品结构、要求、试验方法、检验规则、标志、包装、运输和贮存。

Standard float