共找到 825 条与 造船和海上构筑物通用标准 相关的标准,共 55 页
Double type cross bitts for tug boat
本文件适用于集装箱制造业企业绿色工厂评价
Evaluation Requirements for Green Factory in Container Manufacturing Industry
本文件适用于船舶行业企业绿色工厂评价。
Evaluation Guidelines for Green Factory in Shipbuilding Industry
Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
1 Scope This document specifies the terms and definitions, design, system components, classification, technical requirements and test methods of marine pneumatic quick-closing control devices . It also addresses system pressures, automatic controls, alarms, signal feedback, performance test methods, safety, packaging and handling of pneumatic quick-closing control devices . This document applies to the design, manufacture and acceptance of pneumatic quick-closing control devices .
Ships and marine technology. Pneumatic quick-closing control devices
BS ISO 5476. Ships and Marine Technology. Virtual reality and simulator training equipment and systems for lifesaving appliances and arrangements
This document specifies the terms and definitions, design, system components, classification, technical requirements and test methods of marine pneumatic quick-closing control devices. It also addresses system pressures, automatic controls, alarms, signal feedback, performance test methods, safety, packaging and handling of pneumatic quick-closing control devices. This document applies to the design, manufacture and acceptance of pneumatic quick-closing control devices.
Ships and marine technology — Pneumatic quick-closing control devices
This document provides general technical guidance for the operation of marine environment impact assessments (MEIA) to assess the degree of impact of deep-sea activities of exploration and exploitation for mineral resources to the marine environment. It does not cover matters related to the legal framework for MEIA and deep-sea activities on energy resources.
Marine technology — Marine environment impact assessment (MEIA) — General technical requirements
1.1 This test method covers the recommended procedures for quantitative testing, reporting, and verifying the energy absorption and reaction force of marine fenders. Marine fenders are available in a variety of basic types with several variations of each type and multiple sizes and stiffnesses for each variation. Depending on the particular design, marine fenders may also include integral components of steel, composites, plastics, or other materials. All variations shall be performance tested and reported according to this test method. 1.2 There are three performance variables: berthing energy, reaction, and deflection. There are two methods used to develop rated performance data (RPD) and published performance curves for the three performance variables. 1.3 The primary focus is on fenders used in berthside and ship-to-ship applications for marine vessels. This testing protocol does not address small fendering “bumpers” used in pleasure boat marinas, mounted to hulls of work boats, or used in similar applications; it does not include durability testing. Its primary purpose is to ensure that engineering data reported in manufacturers’ catalogues are based upon common testing methods. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Determining and Reporting the Berthing Energy and Reaction of Marine Fenders
本文件规定了船用光缆接线的工艺准备、工艺要求、工艺过程以及安全注意事项。
Technical requirement for connection procedure of Marine optical fiber cable
本文件规定了船用光纤链路性能检测的检测准备、检测要求、检测过程与安全注意事项等。
Requirements and methods for performance testing of Marine optical fiber link
本文件规定了海洋工程潜在爆炸性气体环境中电气设备的选型与分类、安装过程中的要求及检验相关等。
Installation requirement of electrical equipment in explosive gas atmospheres for offshore engineering
1.1 This guide covers the evaluation and selection of escort vessels that are to be used to escort ships transiting confined waters. The purpose of the escort vessel is to limit the uncontrolled movement of a ship disabled by loss of propulsion or steering to within the navigational constraints of the waterway. The various factors addressed in this guide also can be integrated into a plan for escorting a given ship in a given waterway. The selection of equipment also is addressed in this guide. 1.2 This guide can be used in performance-based analyses to evaluate: 1.2.1 The control requirement of a disabled ship, 1.2.2 The performance capabilities of escort vessels, 1.2.3 The navigational limits and fixed obstacles of a waterway, 1.2.4 The ambient conditions (wind and sea) that will impact the escort response, and 1.2.5 The maneuvering characteristics of combined disabled ship/escort vessel(s). 1.3 This guide outlines how these various factors can be integrated to form an escort plan for a specific ship or a specific waterway. It also outlines training programs and the selection of equipment for escort-related activities. 1.4 A flowchart of the overall process for developing and implementing an escort plan is shown in Fig. 1. The process begins with the collection of appropriate data, which are analyzed with respect to the performance criteria and in consultation with individuals having local specialized knowledge (such as pilots, waterway authorities, interest groups, or public/private organizations, and so forth). This yields escort vessel performance requirements for various transit speeds and conditions; these are embodied in the ship’s escort plan. When the time comes to prepare for the actual transit, the plan is consulted in conjunction with forecast conditions and desired transit speed to select and dispatch the appropriate escort vessel (or combination of vessels). A pre-escort conference is conducted to ensure that all principal persons (ship master, pilot, and escort vessel masters) have a good understanding of how to make a safe transit and interact in the event of an emergency. 1.5 This guide addresses various aspects of escorting, including several performance criteria and methodologies for analyzing the criteria, as well as training, outfitting, and other escort-related considerations. This guide can be expanded as appropriate to add new criteria, incorporate “lessons learned” as more escorting experience is gained in the industry, or to include alternative methodologies for analyzing the criteria. 1.6 This guide addresses physical control of the disabled ship with the assistance of the escort vessel(s). Other possible functions, such as firefighting, piloting, or navigational redundancy, are outside the scope of this guide. Also, this guide was developed for application to oceangoing ships in coastal waterways; it is not suitable for application to barge strings in riverine environments. 1.7 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Guide for Escort Vessel Evaluation and Selection
Installation and performance requirement of heated walkway for polar region environment
Shop test code for marine AC electric overheadtravelling cranes in engine room
Marine evacuation systems-Means of communication
Test code of propelling & machinery at sea trials
Installation and performance requirement of heated handrail for polar region environment
Ships and marine technology-Ship recycling management systems-Guidelines for selection of ship recyclers(and pro forma contract)
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号