75.180.01 石油和天然气工业设备综合 标准查询与下载

ISO 23936-1:2022 包括低碳能源在内的石油和天然气工业.与石油和天然气田生产相关介质接触的非金属材料.第1部分:热塑性塑料

This document gives general principles, specifies requirements and gives recommendations for the assessment of the s tability of non-metallic materials for service in equipment used in oil and gas exploration and production environments. This information aids in material selection. It can be applied to help avoid cos tly degradation failures of the equipment itself, which could pose a risk to the health and safety of the public and personnel or the environment. This document also provides guidance for quality assurance. It supplements but does not replace, the material requirements given in the appropriate design codes, standards or regulations. This document addresses the resistance of thermoplastics to the deterioration in properties that can be caused by physical or chemical interaction with produced and inj ected oil and gas-field media, and with chemical treatment. Interaction with sunlight and ionizing radiation are excluded from the scope of this document. This document is not necessarily suitable for application to equipment used in refining or downs tream processes and equipment. The equipment considered includes, but is not limited to, non-metallic pipelines, piping, liners, seals, gaskets and washers . Blistering by rapid gas decompression is not included in the scope of this document. This document applies to the assessment of the s tability of non-metallic materials in simulated hydrocarbon production conditions to aid the selection of materials for equipment designed and cons tructed using conventional design criteria. Designs utilizing other criteria are excluded from its scope.

Oil and gas industries including lower carbon energy — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics

KS B ISO 16903-2022 石油和天然气工业 液化天然气的特性 影响设计和材料选择

Petroleum and natural gas industries - Characteristics of LNG, influencing the design, and material selection

KS B ISO 15156-1:2022 石油和天然气工业.油气生产中用于含H2S环境的材料.第1部分:耐开裂材料选择的一般原则

Petroleum and natural gas industries — Materials for use in H2S containing environments in oil and gas production — Part 1: General principles for selection of cracking-resistant materials

KS B ISO 15156-1-2022 石油和天然气工业.油气生产中用于含H2S环境的材料.第1部分:耐开裂材料选择的一般原则

Petroleum and natural gas industries — Materials for use in H2S containing environments in oil and gas production — Part 1: General principles for selection of cracking-resistant materials

T/CI 030-2022 分布式光纤地震检波系统设计规范

3.1 分布式光纤地震检波系统 distributed optical fiber seismic geophone system 简写为DAS系统，由监测主机与光缆两部分组成，是以光缆作为传感器件进行地震波感知，由监测主机进行地震信号处理的光电系统。 3.2 实时道集 real-time gathers 指分布式光纤地震检波系统多个位置实时解调存储的地震波信号记录。 3.3 测量长度 detection length 指分布式光纤地震检波系统中可对地震波信号做出响应的最长光缆长度。 3.4 定位精度 positioning accuracy 指分布式光纤地震检波系统显示位置与实际位置的偏差。 3.5 空间分辨率 spatial resolution 指分布式光纤地震检波系统可区分显示的两测量到的地震信号的最小间距。 3.6 最小可探测量 minimum detectable volume 指分布式光纤地震检波系统可响应的最小地震信号强度。

Design specification for distributed optical fiber seismic geophone system

T/CAGDE 207-2022 传感式油罐自动脱水器

1、标准范围。本标准适用于传感式油罐自动脱水器的要求。本标准适用于石油化工行业石化厂罐区对汽油、柴油、原油及其它烃类介质进行脱水作业的传感式自动脱水器的 生产、检验。 2、术语和定义。本标准对标准中涉及到的相关术语进行了解释和定义。 3、参数命名与结构。本标准提出主要技术参数、命名、结构等方面的技术要求 4、正常工作条件等方面的技术要求。 5、要求。本标准提出安装要求、功能要求、检测传感技术、自动切水功能、自动冲洗功能、防止跑油功能、故障自动保护功能、远程控制功能、自动休眠功能、防腐、防爆等方面的技术要求。 6、检验规则。本标准提出出厂检验、型式检验、不合格产品的处理等方面的技术要求。 7、本标准提出标志、包装、运输和贮存等方面的技术要求。

Sensor type oil tank automatic dehydrator

SY/T 0440-2021 工业燃气轮机安装技术规范

Industrial gas turbine installation technical specifications

OENORM EN ISO 15156-2:2021 石油和天然气工业 石油和天然气生产中含 H2S 环境中使用的材料 第2部分：抗裂碳钢和低合金钢，以及铸铁的使用（ISO 15156-2:2020）

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons (ISO 15156-2:2020)

OENORM EN ISO 15156-3:2021 石油和天然气工业 石油和天然气生产中含 H2S 环境中使用的材料 第3部分：抗裂 CRA（耐腐蚀合金）和其他合金（ISO 15156-3:2020）

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2020)

OENORM EN ISO 15156-1:2021 石油和天然气工业 石油和天然气生产中含 H2S 环境中使用的材料 第1部分：抗裂材料选择的一般原则（ISO 15156-1:2020）

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2020)

T/ZZB 2452-2021 轨道式强制硬密封钢制球阀

本文件规定了轨道式强制硬密封钢制球阀的结构型式与型号、基本要求、技术要求、试验方法、检验规则、标志、包装、贮存和运输以及质量承诺。 本文件适用于以原油、成品油和天然气为输送介质，以法兰为连接方式的轨道式强制硬密封钢制球阀，公称压力PN20～PN250、公称尺寸DN100～DN600，压力等级Class150～Class1 500、公称尺寸NPS4～NPS24。

Orbit-style pressurized hard-sealing steel ball valves

FprCEN/TR 17797-2021 天然气基础设施 天然气基础设施中氢气的后果以及 CEN/TC 234 范围内相关标准化需求的确定

Gas infrastructure - Consequences of hydrogen in the gas infrastructure and identification of related standardisation need in the scope of CEN/TC 234

OENORM EN ISO 23936-1:2021 石油、石化和天然气工业 与石油和天然气生产相关的介质接触的非金属材料 第1部分：热塑性塑料（ISO/DIS 23936-1:2021）

Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO/DIS 23936-1:2021)

GSO ISO 16903:2021 石油和天然气工业 液化天然气的特性 影响设计和材料选择

ISO 16903:2015 gives guidance on the characteristics of liquefied natural gas (LNG) and the cryogenic materials used in the LNG industry. It also gives guidance on health and safety matters. It is intended to act as a reference document for the implementation of other standards in the liquefied natural gas field. It is intended as a reference for use by persons who design or operate LNG facilities.

Petroleum and natural gas industries — Characteristics of LNG, influencing the design, and material selection

GSO ISO 16904:2021 石油和天然气行业 传统陆上码头液化天然气海上输送臂的设计和测试

ISO 16904:2016 specifies the design, minimum safety requirements and inspection and testing procedures for liquefied natural gas (LNG) marine transfer arms intended for use on conventional onshore LNG terminals, handling LNG carriers engaged in international trade. It can provide guidance for offshore and coastal operations. It also covers the minimum requirements for safe LNG transfer between ship and shore. Although the requirements for power/control systems are covered, this International Standard does not include all the details for the design and fabrication of standard parts and fittings associated with transfer arms. ISO 16904:2016 is supplementary to local or national standards and regulations and is additional to the requirements of ISO 28460. ISO 16904:2016 needs not be applied to existing facilities.

Petroleum and natural gas industries — Design and testing of LNG marine transfer arms for conventional onshore terminals

GSO ISO 20815:2021 石油、石化和天然气工业 生产保证和可靠性管理

This document describes the concept of production assurance within the systems and operations associated with exploration drilling, exploitation, processing and transport of petroleum, petrochemical and natural gas resources. This document covers upstream (including subsea), midstream and downstream facilities, petrochemical and associated activities. It focuses on production assurance of oil and gas production, processing and associated activities and covers the analysis of reliability and maintenance of the components. This includes a variety of business categories and associated systems/ equipment in the oil and gas value chain. Production assurance addresses not only hydrocarbon production, but also associated activities such as drilling, pipeline installation and subsea intervention. This document provides processes and activities, requirements and guidelines for systematic management, effective planning, execution and use of production assurance and reliability technology. This is to achieve cost-effective solutions over the life cycle of an asset development project structured around the following main elements: — production assurance management for optimum economy of the facility through all of its life cycle phases, while also considering constraints arising from health, safety, environment, and quality; — planning, execution and implementation of reliability technology; — application of reliability and maintenance data; — reliability-based technology development, design and operational improvement. The IEC 60300-3 series addresses equipment reliability and maintenance performance in general. This document designates 12 processes, of which seven are defined as core production assurance processes and addressed in this document. The remaining five processes are denoted as interacting processes and are outside the scope of this document. The interaction of the core production assurance processes with these interacting processes, however, is within the scope of this document as the information flow to and from these latter processes is required to ensure that production assurance requirements can be fulfilled. The only requirement mandated by this document is the establishment and execution of the production assurance programme (PAP). It is important to reflect the PAP in the overall project management in the project for which it applies. This document recommends that the listed processes and activities be initiated only if they can be considered to add value.

Petroleum, petrochemical and natural gas industries — Production assurance and reliability management

GSO ISO 17348:2021 石油天然气工业 高含量CO2套管、油管和井下设备的材料选择

ISO 17348:2016 provides guidelines and requirements for material selection of both seamless casing and tubing, and downhole equipment for CO2 gas injection and gas production wells with high pressure and high CO2 content environments [higher than 10 % (molar) of CO2 and 1 MPa CO2 partial pressure]. Oil production wells are not covered in this International Standard. This International Standard only considers materials compatibility with the environment. Guidance is given for the following: - corrosion evaluation; - materials selection; - corrosion control. ISO 17348:2016 is aimed at high CO2 content wells, where the threat of low pH and CO2 corrosion is greatest. However, many aspects are equally applicable to environments containing lower CO2 concentrations. Materials selection is influenced by many factors and synergies and should be performed by either materials or corrosion engineer.

Petroleum and natural gas industries — Materials selection for high content CO2 for casing, tubing and downhole equipment

GSO ISO 17781:2021 石油、石化和天然气工业 铁素体/奥氏体（双相）不锈钢显微组织质量控制试验方法

ISO 17781:2017 specifies quality control testing methods and test conditions for the characterization of microstructure in relation to relevant properties in ferritic/austenitic (duplex) stainless steel components supplied in the solution annealed condition and fabrication welds in the as welded condition. ISO 17781:2017 supplements the relevant product and fabrication standards with respect to destructive testing methods including sampling of test specimens, test conditions and test acceptance criteria to show freedom from deleterious intermetallic phases and precipitates in duplex stainless steels. In addition, this document specifies the documentation of testing and test results by the testing laboratory. NOTE 1 This document is based upon experience with duplex stainless steels in offshore oil and gas industry applications including topside and subsea hydrocarbon service, sea water service, as well as structural use. NOTE 2 The austenite spacing is relevant to the susceptibility of duplex stainless steels to hydrogen-induced stress cracking (HISC) in subsea applications where cathodic protection is applied. This falls outside the scope of this document. Reference is made to DNV/GL RP-F112[4].

Petroleum, petrochemical and natural gas industries — Test methods for quality control of microstructure of ferritic/austenitic (duplex) stainless steels

prEN ISO 23936-1:2021 石油、石化和天然气工业 与石油和天然气生产相关的介质接触的非金属材料 第1部分：热塑性塑料（ISO/DIS 23936 1:2021）

Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO/DIS 23936- 1:2021)

PN-EN ISO 15156-3-2021-05 E 石油和天然气工业 石油和天然气生产中含 H2S 环境中使用的材料 第3部分：抗裂 CRA（耐腐蚀合金）和其他合金（ISO15156-3:2020）

Petroleum and natural gas industries -- Materials for use in H2S-containing environments in oil and gas production -- Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO15156-3:2020)