81.040.20 建筑玻璃 标准查询与下载

GB/T 18915.2-2002 镀膜玻璃 第2部分;低辐射镀膜玻璃

GB/T 18915的本部分规定了低辐射镀膜玻璃的分类、要求、试验方法、检验规则及包装、标志、贮存和运输。 本部分适用于建筑用低辐射镀膜玻璃，其他方面使用的低辐射镀膜玻璃也可参照本部分。

Coated glass--Part2: Low emissivity coated glass

GB/T 18701-2002 着色玻璃

本标准规定了着色玻璃的分类、要求、检验方法、检验规则、标志、包装、运输和贮存。本标准适用于基体着色的浮法玻璃和普通平板玻璃。

Colored glass

GB/T 18091-2000 玻璃幕墙光学性能

本标准规定了玻璃幕墙的有害光反射及相关光学性能指标、技术要求、试验方法和检验规则。 本标准适用于玻璃幕墙。

Optical properties of glass curtain walls

GB 9962-1999 夹层玻璃

本标准规定了夹层玻璃的分类和要求、试验方法等。 本标准适用于建筑用夹层玻璃，其他场合亦可参照使用。不适用于汽车及其他道路车辆用夹层玻璃。

Laminated glass

GB 17840-1999 防弹玻璃

本标准规定了防弹玻璃的分类、性能要求、试验方法、检验规则和包装、标志、运输、贮存。 本标准适用于汽车、建筑及其他用防弹玻璃。

Bullet resistant glazing

GB 17841-1999 幕墙用钢化玻璃与半钢化玻璃

本标准规定了幕墙用钢化玻璃与半钢化玻璃的尺寸及偏差、外观质量、弯曲度及性能要求。适用于用浮法玻璃制造的平型钢化与半钢化、玻璃化、玻璃制品。若与其他材料复合，其再加工制品如夹层、中空或镀膜，则最终产品也应满足相应产品的标准要求。 本标准对弯型制品不作规定。

Tempered and heat--strengthened glass used in curtain wall

GB 11614-1999 浮法玻璃

本标准规定了无色透明浮法玻璃的分类、要求、检验方法、检验规则、标志、包装、运输和贮存。 本标准适用于制镜、汽车和建筑等使用的浮法玻璃。

Float glass

GB/T 2680-1994 建筑玻璃 可见光透射比,太阳光直接透射比、太阳能总透射比、紫外线透射比及有关窗玻璃参数的测定

本标准规定了建筑玻璃可见光透射（反射）比、太阳光直接透射（反射、吸收）比、太阳能总透射比、紫外线透射（反射）比、半球辐射率和遮蔽系数的测定条件和计算公式。 本标准适用于建筑玻璃以及它们的单层、多层窗玻璃构件光学性能的测定。

Determination of light transmittance,solar direct transmittance,total solar energy transmittance and ultraviolet transmittance for glass in building and related glazing factors

BS EN 17871:2024 建筑中的玻璃 玻璃产品的分光光度特性 计算工具的验证程序

1   Scope This document provides a procedure to validate a calculation tool of spectrophotometric and thermal characteristics of the glass products following EN 410 or EN 673. It provides also the methodology to correctly use measured data in the calculation tools. The following characteristics are included in the scope of this document: — light transmittance ( t v ) — light reflectance - both sides ( r v, r' v ) — solar direct transmittance ( t e ) — solar direct reflectance – both sides ( r e, r' e ) — total solar energy transmittance (solar factor or g value) ( g ) — thermal transmittance ( U value) in the vertical position The following characteristics are excluded from the scope of this document: — UV transmittance ( t uv ) — shading coefficient ( SC )

Glass in building. Spectrophotometric characteristics of glass products. Validation procedure for calculation tool

GSO ISO 12543-2:2024 建筑玻璃 夹层玻璃和夹层安全玻璃 第2部分：夹层安全玻璃

This document specifies performance requirements for laminated safety glass as defined in ISO 12543-1. NOTE       Any defects that are found in installed laminated safety glass are dealt with in ISO 12543-6.

Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass

GSO ISO 12543-5:2024 建筑玻璃 夹层玻璃和夹层安全玻璃 第5部分：尺寸和边缘精加工

This document specifies dimensions, limit deviations and edge finishes of laminated glass and laminated safety glass for use in building. This document is not applicable to panes having an area less than 0,05 m2.

Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing

GSO ISO 12543-4:2024 建筑玻璃 夹层玻璃和夹层安全玻璃 第4部分：耐久性试验方法

This document specifies test methods relating to resistance to high temperature, humidity and radiation for laminated glass and laminated safety glass for use in building.

Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods for durability

GSO ISO 12543-3:2024 建筑玻璃 夹层玻璃和夹层安全玻璃 第3部分：夹层玻璃

This document specifies performance requirements for laminated glass as defined in ISO 12543-1. NOTE       Any defects that are found in installed laminated safety glass are dealt with in ISO 12543-6.

Glass in building — Laminated glass and laminated safety glass — Part 3: Laminated glass

ASTM E2358-24 永久栏杆系统、防护装置和栏杆玻璃性能的标准规范

1.1  This specification covers glass in permanent railing systems, guards, and balustrades, including components such as rails and swing gates or other forms of required guardrail opening protection installed in agricultural, assembly, comme- rcial, educational, industrial, institutional, recreational, and residential buildings, and other structures such as towers or elevated platforms. 1.2  This specification is intended to be applied to permanent glass or other glazing railing systems for buildings and to such railing systems, rails, guards, and balustrades having major structural components made of glass or other glazing material, or the secondary components such as infill or balusters made of glass or other glazing material. 1.3  This specification considers that the overall outlook is based on the health and safety of all potential users of buildings. The criteria incorporated in this specification provide for normal and anticipated building uses, but not for abuses for which the building and its components are not designed. 1.4  This specification establishes basic minimum requirements and criteria that lead to satisfactory products under normal use conditions and does not give consideration to design criteria for specific field conditions, the establishment of which is the prerogative and responsibility of the designer, specification writer, and regulatory agencies. 1.5   This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and to determine the applicability of regulatory limitations prior to use. 1.6  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades

T/CIET 447-2024 绿色设计产品评价技术规范 薄膜光伏玻璃

本文件规定了薄膜光伏玻璃绿色设计产品的术语和定义、评价原则和方法、评价要求和生命周期评价报告编制方法。 本文件适用于薄膜光伏玻璃绿色设计产品的评价。

Technical Specifications for Green Design Product Evaluation Thin Film Photovoltaic Glass

T/CASME 1369-2024 内置百叶中空玻璃

本文件规定了内置百叶中空玻璃的分类、材料和配件、技术要求、试验方法、检验规则、标志、标签和随行文件、包装、运输和贮存。

Hollow built-in louver glass

24/30483830 DC BS EN 16613 建筑玻璃 夹层玻璃和夹层安全玻璃 夹层粘弹性的测定

BS EN 16613 Glass in building - Laminated glass and laminated safety glass -Determination of interlayer viscoelastic properties

BS ISO 22897:2023 建筑中的玻璃 玻璃和空气隔音 产品描述、属性确定和扩展规则

Glass in building. Glazing and airborne sound insulation. Product descriptions, determination of properties and extension rules

T/QGCML 2135-2023 建筑用中空U型玻璃

本文件规定了建筑用中空U型玻璃的术语和定义、产品分类、技术要求、试验方法、检验规则、标志、包装运输和贮存。 本文件适用于建筑用中空U型玻璃的生产和检验。

Insulated U-shaped glass for construction

ASTM C1279-23 退火、热强化和完全回火平板玻璃边缘和表面应力的无损光弹性测量的标准试验方法

Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass