81.040.20 建筑玻璃 标准查询与下载

T/CASME 733-2023 淋浴房用钢化玻璃技术要求

本文件规定了淋浴房用钢化玻璃的术语和定义、技术要求、试验方法、检验规则及标志、包装、运输和贮存内容。

Technical requirements for tempered glass for shower room

ASTM D8040-18(2023) 玻璃器皿中传热流体腐蚀试验的标准试验方法

Standard Test Method for Corrosion Test for Heat Transfer Fluids in Glassware

23/30464006 DC BS ISO 20492-1 建筑物中的玻璃 中空玻璃 第1部分：通过气候测试测得边缘密封的耐久性

BS ISO 20492-1. Glass in buildings. Insulating glass - Part 1. Durability of edge seals by climate tests

23/30464009 DC BS ISO 20492-2 建筑物中的玻璃 中空玻璃 第2部分：化学雾化测试

BS ISO 20492-2. Glass in buildings. Insulating glass - Part 2. Chemical fogging tests

23/30464012 DC BS ISO 20492-3 建筑物中的玻璃 中空玻璃 第3部分：气体浓度和气体泄漏

BS ISO 20492-3. Glass in buildings. Insulating glass - Part 3. Gas concentration and gas leakage

ISO/PRF 22897:2023 建筑玻璃 — 玻璃窗和空气声隔离 — 产品描述、性能测定和扩展规则

Glass in building — Glazing and airborne sound insulation — Product descriptions, determination of properties and extension rules

GSO 2711:2023 建筑玻璃用胶膜

This Standard specifies the specifications and test methods adhesive films (hereafter referred to as films) to be applied to the glazing in parts of buildings such as windows and entrances.

Adhesive films for building glass

ASTM E424-71(2023) 薄板材料的太阳能透射率和反射率（地面）的标准试验方法

1.1 These test methods cover the measurement of solar energy transmittance and reflectance (terrestrial) of materials in sheet form. Method A, using a spectrophotometer, is applicable for both transmittance and reflectance and is the referee method. Method B is applicable only for measurement of transmittance using a pyranometer in an enclosure and the sun as the energy source. Specimens for Method A are limited in size by the geometry of the spectrophotometer while Method B requires a specimen 0.61 m2 (2 ft2 ). For the materials studied by the drafting task group, both test methods give essentially equivalent results. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials

ISO/DIS 20492-1:2023 建筑物中的玻璃 中空玻璃 第 1 部分：通过气候测试测得边缘密封的耐久性

Glass in buildings - Insulating glass — Part 1: Durability of edge seals by climate tests

ISO/DIS 20492-3:2023 建筑物中的玻璃 中空玻璃 第3部分：气体浓度和气体泄漏

Glass in buildings — Insulating glass — Part 3: Gas concentration and gas leakage

ISO/DIS 20492-4:2023 建筑物中的玻璃 中空玻璃 第 4 部分：封边物理属性的测试方法

Glass in buildings — Insulating glass — Part 4: Methods of test for the physical attributes of edge seals

ISO/DIS 20492-2:2023 建筑物中的玻璃 中空玻璃 第 2 部分：化学雾化测试

Glass in buildings - Insulating glass — Part 2: Chemical fogging tests

GSO ISO 16293-2:2023 建筑用玻璃 碱式钠钙硅酸盐玻璃产品 第2部分：浮法玻璃

ISO 16293-2:2017 specifies dimensional and minimum quality requirements (in respect of optical and visual faults) for float glass for use in building, as defined in ISO 16293‑1. ISO 16293-2:2017 applies to float glass supplied in stock sizes and final cut sizes.

Glass in building — Basic soda lime silicate glass products — Part 2: Float glass

GSO ISO 16936-1:2023 建筑玻璃 强行进入安全玻璃 第1部分：重复落球测试和分类

This document specifies requirements and a test method for security glazing designed to resist impacts of a hard body by delaying access of objects and/or persons to a protected space for a short period of time. It also classifies security-glazing products into categories of resistance to repetitive impacts of a steel sphere. In this document, the categories of resistance have not been assigned to special applications. It is intended that the glazing classification be specified on an individual basis for every application and anticipated action of force upon the glazing. This document deals with mechanical resistance to impact only. NOTE Other properties can also be important.

Glass in building — Forced-entry security glazing — Part 1: Test and classification by repetitive ball drop

GSO ISO 16293-3:2023 建筑用玻璃 碱式钠钙硅酸盐玻璃产品 第3部分：抛光夹丝玻璃

ISO 16293-3:2017 specifies dimensional and minimum quality requirements (in respect of optical, visual and wire faults) for polished wired glass, as defined in ISO 16293‑1, for use in building. ISO 16293-3:2017 applies only to polished wired glass supplied in rectangular panes, in stock sizes and final cut sizes.

Glass in building — Basic soda lime silicate glass products — Part 3: Polished wired glass

GSO ASTM E2190:2023 中空玻璃单元性能和评估标准规范

  Scope is not provided for this standard

Standard Specification for Insulating Glass Unit Performance and Evaluation

GSO ASTM E2189:2023 中空玻璃抗雾性测试的标准测试方法

  Scope is not provided for this standard

Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units

23/30464491 DC BS ISO 22897 建筑中的玻璃 玻璃和空气隔音 产品描述、属性确定和扩展规则

BS ISO 22897. Glass in building. Glazing and airborne sound insulation. Product descriptions, determination of properties and extension rules

ASTM C1249-18(2023) 结构密封玻璃用密封绝缘玻璃单元的二次密封的标准指南

1.1 This guide covers design and fabrication considerations for the edge seal of conventionally sealed insulating glass units, herein referred to as IG units. The IG units described are used in structural silicone sealant glazing systems, herein referred to as SSG systems. SSG systems typically are either two or four sided, glazed with a structural sealant. Other conditions such as one, three, five, six sided may be used. 1.2 This guides does not cover the IG units of other than conventional edge seal design (Fig. 1); however, the information contained herein may be of benefit to the designers of such IG units. 1.3 In an SSG system, IG units are retained to a metal framing system by a structural seal (Fig. 2). The size and shape of that seal, as well as numerous other SSG system design considerations, are not addressed in this guide. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 The committee with jurisdiction for this standard is not aware of any comparable standard guides published by other organizations. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications

23/30464856 DC BS EN 17940 建筑中的玻璃 用于制造夹层玻璃的 Folio 中间膜 产品标准

BS EN 17940. Glass in Building. Folio Interlayers for the Manufacturing of Laminated Glass. Product standard