81.060.10 原料 标准查询与下载

T/FSCIA 0013-2019 建筑卫生陶瓷用高岭土

本标准规定了建筑卫生陶瓷原材料粘土类中高岭土的产品分类、技术质量要求、检测方法、检验规 则、标识、包装、运输和贮存。 其中技术质量要求规定了：外观质量、化学成分、烧后白度、含水率、筛余量、线收缩率、可塑性指数、干燥抗折强度、相对流动性等指标。

Kaolin for Building and Sanitary Ceramics

T/FSCIA 0016-2019 建筑陶瓷用钾钠砂

本标准规定了建筑陶瓷原材料长石类中钾钠砂的分类、技术要求、检测方法、检验规则、标志、包装、运输和贮存。 其中技术要求规定了外观质量、化学成分、含水率、烧后白度、粒度等技术指标。

Potassium sodium sand for building ceramics

T/FSCIA 0015-2019 建筑卫生陶瓷用钠长石（粉）

标准规定了建筑卫生陶瓷原材料长石类中钠长石（粉）的术语和定义、分类、技术要求、检验方法、 检验规则、标志、包装、运输和贮存。 其中技术要求规定了外观质量；化学成分；　烧后白度；筛余量、粒度；含水率等技术要求。

Sodium feldspar (powder) for building and sanitary ceramics

T/FSCIA 0014-2019 建筑卫生陶瓷用钾长石（粉）

本标准规定了建筑卫生陶瓷原材料长石类中钾长石（粉）的分类、术语和定义、技术要求、检测方 法、检验规则、标志、包装、运输和贮存。 其中技术要求规定了：外观质量、化学成分 、烧后白度、筛余量、粒度、含水率等技术要求。

Potassium feldspar (powder) for building and sanitary ceramics

KS L 2107-2019 二氧化硅涂层对玻璃基材附着力的测试方法

Testing methods for the adhesion of silica coating to the glass substrate

ASTM C925-09(2019) 非陶瓷粉末精密电铸湿筛分析标准指南

1.1 This guide covers the determination of the particle size distribution of pulverized alumina and quartz for particle sizes from 45 to 5 µm by wet sieving. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.2.1 The only exception is in the Section 5, Apparatus, 5.1 where there is no relevant SI equivalent. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders

ASTM C1182-09(2019) 通过离心照相测定氧化铝颗粒尺寸分布的标准测试方法

1.1 This test method covers the determination of the particle size distribution of alumina in the range from 0.1 to 20 µm having a median particle diameter from 0.5 to 5.0 µm. 1.2 The procedure described in this test method may be successfully applied to other ceramic powders in this general size range. It is the responsibility of the user to determine the applicability of this test method to other material. 1.3 The values stated in SI units are to regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation

ASTM C690-09(2019) 氧化铝或石英粉末通过电气感应区技术的粒度分布的标准测试方法

1.1 This test method, one of several found valuable for the measurement of particle size, covers the determination of the particle size distribution of alumina or quartz powders (0.6 to 56.0 µm) using electrical sensing zone particle size analyzers. These instruments use an electric current path of small dimensions which is modulated by individual particle passage through an aperture, and produces individual pulses of amplitude proportional to the particle volume. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Particle Size Distribution of Alumina or Quartz Powders by Electrical Sensing Zone Technique

T/CBCSA 17-2019 建筑陶瓷压制成形用粉料

确定建筑陶瓷压制成形粉料的分类、物理性能、化学性能、使用技术要求、试验方法、检验规则以及安全、环保相关要求。

Pressing and formation powder for building ceramics

ASTM C326-09(2018) 陶瓷洁具粘土的干燥和烧制收缩的标准试验方法

1.1 This test method covers the determination of linear shrinkage of ceramic whiteware clays, both unfired and fired. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays

ASTM C371-09(2018) 非塑性陶瓷粉末的丝网筛分析的标准试验方法

1.1 This test method covers the determination of the particle size distribution of nonplastic ceramic powders such as alumina, silica, feldspar, pyrophyllite, nepheline syenite, talc, titanates, and zircon using wire cloth sieves. 1.2 Materials containing a large amount of fines, containing agglomerates, or that are nonfree-flowing, are wet-sieved to remove excessive fines or to disperse agglomerates before performing the test. This technique is not applicable to materials that are, to any degree, water soluble. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units, or are other customary units (in the case of sieve frame diameter and sieve number), that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders

JC/T 2448-2018 精制方解石粉

本标准规定了精制方解石粉的术语和定义、分级和标记、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于在瓶罐玻璃、器皿玻璃、水晶灯饰、陶瓷生产中使用的精制方解石粉。

The refined calcite powder

JIS R 9101:2018 石膏的化学分析方法

Methods for chemical analysis of gypsum

KS L 3412-2017 测试方法ASH石墨

Testing method for ash in graphite

KS L 3412-2017(2022) 石墨中灰分的试验方法

Testing method for ash in graphite

KS L 9310-2017 氮化铝粉末的化学分析方法

Methods for chemical analysis of aluminum nitride powders

KS L 9300-2017(2022) 钛酸钡粉末化学分析方法

Methods for chemical analysis of barium titanate powders

KS L 9310-2017(2022) 氮化铝粉末化学分析方法

Methods for chemical analysis of aluminum nitride powders

KS L 9300-2017 钛酸钡粉体化学分析方法

Methods for chemical analysis of barium titanate powders

DIN 51457:2017 陶瓷原材料和基础材料试验. 采用电感耦合等离子体(ICP OES)光发射光谱法和电热蒸发直接测定石墨粉末, 颗粒和团块中痕量杂质的质量分数

Testing of ceramic raw and basic materials - Direct determination of mass fractions of trace impurities in powders, granules and lumps of graphite by optical emission spectroscopy by inductively coupled plasma (ICP OES) and by electrothermal vaporization