91.060.10 墙、隔墙、面墙 标准查询与下载

T/CASME 1466-2024 建筑装修砌墙砖工程施工规范

本文件规定了建筑装修砌墙砖工程施工的术语和定义、技术要求、施工前准备、材料选择和验收、基础处理和墙体布置、砌筑操作要求、防水处理和保温要求、接缝处理和装饰要求、操作工艺、质量要求、需注意的质量问题、成品保护、质量验收和检测、职业健康安全与环境管理内容。

Specification for the construction of masonry brickwork for building renovations

GSO ASTM E2126:2024 建筑物抗侧力系统垂直构件抗剪循环（反向）荷载试验的标准试验方法

1.1 These test methods cover the evaluation of the shear stiffness, shear strength, and ductility of the vertical elements of lateral force resisting systems, including applicable shear connections and hold-down connections, under quasi-static cyclic (reversed) load conditions. 1.2 These test methods are intended for specimens constructed from wood or metal framing braced with solid sheathing or other methods or structural insulated panels. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings

GSO ASTM F1861:2024 弹性墙基标准规范

This specification covers resilient wall base. These products are manufactured from rubber or thermoplastic materials, or a combination thereof. Wall base is used to provide a functional, as well as decorative border, between walls and floors. This specification does not include rigid products. Wall base shall be of the following types, as specified: type TS - rubber, vulcanized thermoset, type TP - rubber, thermoplastic, and type TV - vinyl, thermoplastic. Wall base shall be one of the following groups, as specified: group 1 - solid, and group 2 - layered. Wall base shall be of the following styles as specified: style A - straight, style B - cove, style C - butt-to, style D - sculptured. The wear layer thickness, flexibility, adjacent surface straining induced by wall base, light resistance, chemical resistance, dimensional stability, height, thickness, and length shall be tested to meet the requirements prescribed.

Standard Specification for Resilient Wall Base

GSO ASTM C474:2024 石膏板结构接缝处理材料的标准试验方法

These test methods cover the physical testing of joint treatment materials such as joint compound, paper joint tape, glass-mesh joint tape, and an assembly of joint compound and paper joint tape. These materials are used in gypsum board construction. The test methods are detailed for the following: joint compound tests— for viscosity, shrinkage, check cracking, and putrefaction; joint tape tests— for tensile strength, width, and thickness; paper joint tape tests— for dimensional stability; assemblages of paper joint tape and joint compound— for bond of paper joint tape to joint compound and cracking of joint compound at tape edges; and glass-mesh joint tape test— for skewness.

Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction

GSO ASTM C754:2024 用于安装螺钉固定石膏板产品的钢结构构件的标准规范

This specification covers the minimum requirements for the installation of interior nonstructural steel framing and furring members designed to receive screw-attached gypsum panel products. Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories. Each element of the assembly, that is, the studs, runners, rigid furring channels, tie wires, hanger wires, grid suspension systems (consisting of the main beam, cross furring members, and rod and flat hangers) shall be manufactured in the specified dimensions. Specified installation procedures for the metal framing, which includes the runners, studs, chase wall partitions, rigid furring channels, wall furring-bracket systems, and soffits, are detailed thoroughly. Installation requirements for the suspended and furred ceilings, including the main runners, flat hangers and inserts, wood constructions, furring members, rigid furring channels, and grid suspension systems, are discussed methodically as well.

Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products

GSO ASTM C1496:2024 外部尺寸石砌墙和外墙的评估和维护标准指南

This guide outlines the standard procedures for the visual assessment and maintenance of exterior dimension stone masonry walls and facades to determine their general condition. The examination procedures established here can help identify and diagnose problems that require repairs or corrective action, but is not intended to be used for buildings requiring major exterior rehabilitation or structural repairs. This guide applies to walls of solid stone or dimension stone claddings with joints usually filled with mortar or sealant that are designed to accommodate structural and thermal movements. This guide specifically excludes the following: dimension stone used in interior building surfaces, flooring, or paving; slate dimension stone used as roofing; thin stone exterior cladding; stone cladding attached to metal flames; the removal of small area stains. Also, this guide may apply, but is not specifically directed, to the following: walls and facades containing semi-dimensions, or partially sized, stone in the form of split-face or rubble; and stone-facade concrete panels. The common problems to consider include rising damps; mortar distresses; surface losses; cracks; displacements, bowings, or bulges; and spalls and fragments. The corresponding repairs to be made that shall address these problems are detailed for each.

Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades

T/QGCML 4121-2024 装配式住宅的预制墙安装结构技术规范

本文件规定了装配式住宅的预制墙安装结构技术规范的术语和定义、施工准备、工艺流程、质量保证措施、安全保证措施、应急预案。 本文件适用于装配式住宅的预制墙安装结构技术的设计和检验。

Technical specifications for prefabricated wall installation structures for prefabricated residential buildings

T/LNJC 003-2024 装配式加气混凝土复合保温外墙板应用技术规程

主要技术内容包括：1总则；2术语；3基本规定；4系统与材料；5设计；6生产运输；7施工；8质量验收；9保养与维修。

Technical specification for application of assembled aerated concrete composite insulation exterior wall panel

T/SDBMIA 002-2024 《ZY装配式蒸压加气混凝土夹芯复合保温外墙板系统建筑构造》

本图集编制内容包括：编制说明、建筑外墙热工参考选用表、轻质混凝土条板计算跨度和承载力选用表、构造节点详图和外墙板配套专用金属件选用表、外墙门窗洞口加强扁钢选用表等。

ZY prefabricated autoclaved aerated concrete sandwich composite insulation exterior wall panel system building structure

T/SDBMIA 001-2024 《ZY装配式蒸压加气混凝土夹芯复合保温外墙板系统应用技术规程》

1 总 则 2 术 语 3 基本规定 4 系统及材料 4.1 系统构造及性能要求 4.2 ZY 装配式保温墙板 4.3 配套材料 5 设 计 5.1 建筑设计 5.2 节能设计 5.3 结构设计 5.4 构造设计 6 施 工 6.1 一般规定 6.2 施工准备 6.3 施工工艺及要点 7 验 收 7.1 一般规定 7.2 主控项目 7.3 一般项目 7.4 验收要求

Technical Regulations for the Application of ZY Prefabricated Autoclaved Aerated Concrete Sandwich Composite Insulation Exterior Wall Panel System

DB54/T 0315-2024 竹基水泥板组合墙体技术规程

Technical regulations for bamboo-based cement board composite walls

ASTM D5206-24 硬质塑料壁板抗风载荷的标准试验方法

Standard Test Method for Windload Resistance of Rigid Plastic Siding

T/YNABEE 006-2024 装配式钢网内模轻质墙体

编的内容 1.本图集装配式钢网内模轻质，按其性能和使用功能主要分为普通型墙体和自保温节能型墙体。对其适用范围，材料性能要求，设计构造要求等通过计算和检测报告进行编制。其中：针对普通型墙体和自保温节能型墙体对梁、柱、板和其它节点构造进行图文说明。 2.本图集列入的装配式钢网内模轻质墙体是一种以金属网片为内模， 外附水泥砂浆的墙体。可工厂预制，满足装配式建筑的发展要求。该墙体分为普通型墙体和自保温节能型墙体。 3.普通型墙体中部为轻钢龙骨支撑，两侧采用压型钢板网，外部采用水泥砂浆喷涂后形成整体的直线形或异形非承重墙体，自保温节能型墙体中部为轻钢龙骨支撑，两侧采用焊接钢筋网、压型钢板网、金属连接紧固件及夹芯保温材料复合制成的功能性墙体，用于建筑外墙、内墙及其它工程的材料运用，技术及质量要求应符合《中空钢网内模水泥隔墙技术规程》的规定。

Prefabricated steel mesh inner mold lightweight wall

BS EN 13116:2024 幕墙 抗风荷载 性能要求

Curtain walling. Resistance to wind load. Performance requirements

T/CASME 1308-2024 居住建筑节能工程墙体施工质量验收规程

本文件规定了居住建筑节能工程墙体施工的基本规定、施工质量要求及质量验收要求。

Code for acceptance of construction quality of energy-saving engineering walls in residential buildings

T/SDAS 790-2024 FS-N聚苯颗粒水泥条板建筑构造

本图集适用于抗震设防烈度为8度和8度以下地区，新建、改扩建和既有民用与工业建筑非承重内隔墙工程。

FS-N polystyrene particle cement strip building structure

T/CCIAT 0075-2024 外墙保温工程分包单位项目经理岗位标准

1.总则；2.术语；3.基本规定；4.任职条件及职责；5.施工准备管理；6.施工过程管理；7.工程验收管理。

Job Standards for Project Manager of Exterior Wall Insulation Project Subcontracting Unit

T/CCIAT 0076-2024 外墙保温工程施工质量管理标准

1.总则；2.术语；3.基本规定；4.施工组织管理；5.施工质量控制及自检；6.安全、环保及成品保护等。

Construction quality management standards for exterior wall insulation projects

ASTM D8109-17(2024) 用化学灌浆裂缝注入法对混凝土进行防水修复的标准指南

Standard Guide for Waterproofing Repair of Concrete by Chemical Grout Crack Injection

DB11/T 2206-2023 建筑垃圾再生墙体材料应用技术规程

Technical regulations for the application of construction waste recycled wall materials