91.060.10 墙、隔墙、面墙 标准查询与下载
共找到 684 条与 墙、隔墙、面墙 相关的标准，共 46 页
Technical specification for reliability appraisal of existing building curtain wall
- ICS
- 91.060.10
- CCS
- P32
- 发布
- 2021-07-07
- 实施
- 2021-11-07
Technical specification for light steel keel-mixed-phase phosphogypsum sprayed walls
- ICS
- 91.060.10
- CCS
- P33
- 发布
- 2021-07-07
- 实施
- 2021-11-07
Doors, windows and curtain walling – Curtain walling – Vocabulary
- ICS
- 91.060.10
- CCS
- 发布
- 2021-07-01
- 实施
- 2021-07-01
This specification covers nonstructural steel framing members in interior construction assemblies. Members shall be manufactured from steel and shall have a protective coating. Studs and rigid furring channels shall have a configuration and steel thickness such that the system in which they are used will carry the design transverse loads without exceeding either the allowable stress of the steel or the allowable design deflection. Members shall be manufactured in such a fashion as to minimize burrs and sharp edges. Penetration test shall be done for performance requirements, where members shall be capable of pulling the head of the screw below the surface of the gypsum board without spin out. Apparatus and materials shall satisfy the testing requirements of the specification.
Standard Specification for Nonstructural Steel Framing Members
- ICS
- 91.060.10
- CCS
- 发布
- 2021-07-01
- 实施
ISO 16283-3:2016 specifies procedures to determine the airborne sound insulation of façade elements (element methods) and whole façades (global methods) using sound pressure measurements. These procedures are intended for room volumes in the range from 10 m3 to 250 m3 in the frequency range from 50 Hz to 5 000 Hz. The test results can be used to quantify, assess, and compare the airborne sound insulation in unfurnished or furnished rooms where the sound field can or cannot approximate to a diffuse field. The measured airborne sound insulation is frequency-dependent and can be converted into a single number quantity to characterize the acoustic performance using the rating procedures in ISO 717-1.
Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 3: Façade sound insulation
- ICS
- 91.060.10
- CCS
- 发布
- 2021-07-01
- 实施
1.1 This guide describes the types of project-specific construction conditions that need to be communicated by means of drawings (“details”) for the purpose of constructing Exterior Insulation and Finish System (EIFS)-clad barrier and drainage wall assemblies. EIFS manufacturers provide basic details for the installation of their materials and interface with adjacent materials. These details are generic and, in many cases, do not apply to specific project conditions. 1.2 This guide addresses only the EIFS itself and the interface between the EIFS and the materials immediately adjacent to the EIFS; it does not address all parts of the wall assembly. 1.3 Not all possible construction detail conditions are addressed by this guide. Identify and provide details for all construction conditions that exist on a specific building. 1.4 This guide is intended to supplement but not supersede information from the EIFS manufacturer about how their specific product should be detailed, nor to supersede technical product acceptance reports or the code requirements of regulatory authorities.
Standard Guide for Detailing of EIFS-Clad Barrier and Drainage Wall Assemblies
- ICS
- 91.060.10
- CCS
- 发布
- 2021-07-01
- 实施
This specification establishes the requirements for factory-laminated gypsum panel products designed for use either on walls, ceilings, or partitions as part of a sound control system, or as a gypsum stud or gypsum coreboard. It covers materials and manufacture, physical properties, dimensions and tolerances, finish and appearance, sampling, inspection, rejection, certification, packaging, marking, shipping, handling, and storage.
Standard Specification for Factory-Laminated Gypsum Panel Products
- ICS
- 91.060.10
- CCS
- 发布
- 2021-07-01
- 实施
Curtain walling - Determination of the strength of shear connections - Test method and requirements
- ICS
- 91.060.10
- CCS
- 发布
- 2021-06-17
- 实施
- 2021-06-17
Technical specification for the application of prefabricated steel structure wall panels
- ICS
- 91.060.10
- CCS
- Q 15
- 发布
- 2021-06-08
- 实施
- 2021-12-08
Regulations for acceptance of construction quality of building curtain wall engineering
- ICS
- 91.060.10
- CCS
- P 32
- 发布
- 2021-06-08
- 实施
- 2021-12-08
Method of bending test for building boards
- ICS
- 91.060.10
- CCS
- 发布
- 2021-06-08
- 实施
Technical specifications for cast-in-place concrete built-in thermal insulation walls
- ICS
- 91.060.10
- CCS
- Q 15
- 发布
- 2021-06-08
- 实施
- 2021-12-08
Technical specifications for precast concrete sandwich insulation external wall panels
- ICS
- 91.060.10
- CCS
- Q 15
- 发布
- 2021-06-08
- 实施
- 2021-12-08
Curtain walling – Determination of the strength of shear connections – Test method and requirements
- ICS
- 91.060.10
- CCS
- 发布
- 2021-06-01
- 实施
- 2021-06-01
1.1?This test method covers determination of the diagonal tensile or shear strength of masonry assemblages by loading them in compression along one diagonal (see Fig. 1), thus causing a diagonal tension failure with the specimen splitting apart parallel to the direction of load.
Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
- ICS
- 91.060.10
- CCS
- 发布
- 2021-06-01
- 实施
Standard Test Methods for Flexural Bond Strength of Masonry
- ICS
- 91.060.10
- CCS
- 发布
- 2021-06-01
- 实施
This document provides definitions for terms used in documents, drawings, specifications, etc., when referring to the detailed elements of curtain walling. It provides a comprehensive, though not total, list of regular terms. It does not set out to repeat those physical definitions properly included within individual curtain walling standards related to performance requirements and associated test methods.
Doors, windows and curtain walling - Curtain walling - Vocabulary
- ICS
- 91.060.10
- CCS
- 发布
- 2021-06-00
- 实施
Curtain walling. Determination of the strength of shear connections. Test method and requirements
- ICS
- 91.060.10
- CCS
- P32
- 发布
- 2021-05-28
- 实施
- 2021-05-28
The document in conjunction with DIN 18516-1 specifies cladding for external walls, ventilated at rear for manufactures stones. Defined are the requirements for the manufactures stones, for the fixing and anchoring as well as the calculation and design. Furthermore the execution
Cladding for external walls, ventilated at rear - Part 5: Manufactured stone; requirements, design
- ICS
- 91.060.10
- CCS
- 发布
- 2021-05-01
- 实施
This document in conjunction with DIN 18516-1 specifies cladding for external walls for natural stone, ventilated at rear.
Cladding for external walls, ventilated at rear - Part 3: Natural stone - Requirements, design
- ICS
- 91.060.10
- CCS
- 发布
- 2021-05-01
- 实施
