91.060.10 墙、隔墙、面墙 标准查询与下载

JG/T 579-2021 建筑装配式集成墙面

Building prefabricated integrated wall

T/CECS 962-2021 超大尺寸玻璃幕墙应用技术规程

主要技术内容包括：总则、术语、材料、设计、加工制作、安装施工、工程验收、维护保养等。

Technical specification for the application of super-large glass curtain wall

ASTM C1670/C1670M-21b 粘附的人造石砌体饰面单元的标准规范

1.1 This specification covers the minimum product requirements for adhered manufactured stone masonry veneer units applied as an adhered veneer to exterior and interior walls and structures suitable to receive units. 1.2 The property requirements of this specification apply at the time of delivery. This standard does not address the physical evaluation of installed units removed from service. 1.3 The units described by this specification are manufactured from a mixture of cement, normal or lightweight aggregates (or a combination of both), water, admixtures, other cementitious materials and other components which are wetcast into shapes simulating the appearance of natural stone and other textures. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.5 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes shall not be considered as requirements of the standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—When particular features are desired such as surface textures or color these features should be specified separately. Suppliers should be consulted as to the availability of units having the desired features. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Adhered Manufactured Stone Masonry Veneer Units

T/ZZXJX 063-2021 再生集料混凝土墙板应用技术规程

前  言　 1 范围　 2 规范性引用文件　 3 术语和定义　 4 材料　     4.1 一般规定　     4.2 原材料要求　     4.3 砂  浆　     4.4 配套材料及配件　 5 再生集料混凝土墙板墙体　     5.1 一般规定　     5.2 墙  板　     5.3 设计与构造　     5.4 墙体安装施工　 6 墙板墙体工程验收　     6.1 基本规定　     6.2 主控项目　     6.3 一般项目　

Technical specification for the application of recycled aggregate concrete wall panels

ASTM D7254-21 聚丙烯（PP）墙板的标准规范

1.1 This specification establishes requirements and test methods for materials, impact strength, appearance, surface flame spread, and wind load resistance of siding products manufactured from polypropylene material. Methods of indicating compliance with this specification are also provided. 1.2 The use of polypropylene recycled plastic in this product shall be in accordance with the requirements in Section 4. 1.3 Siding produced to this specification shall be installed in accordance with manufacturer’s installation instructions for the specific product to be installed. NOTE 1—Information with regard to siding maintenance shall be obtained from the manufacturer. 1.4 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information purposes only. 1.5 The following precautionary caveat pertains to the test method portion only, Section 6 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 2—There is no known ISO equivalent to this standard. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Polypropylene (PP) Siding

DIN EN 16758:2021 幕墙. 剪切连接强度的测定. 试验方法和要求; 德文版本EN 16758-2021

This document specifies test methods for the determination of bearing capacity (ultimate limit state and serviceability limit state), of connections between curtain walling framing members which cannot be calculated in accordance with current codes or conventional calculations ba

Curtain walling - Determination of the strength of shear connections - Test method and requirements; German version EN 16758:2021

T/CECS 931-2021 改性模塑聚苯板外墙保温工程技术规程

主要技术内容包括：总则、术语、基本规定、系统构造和性能、设计、施工及验收等。

Modified molded polystyrene board external wall insulation engineering technical specification

NF P75-501-1-2:2021 建筑工程 带通风覆层的外部隔热系统 第 1-2 部分：材料选择的一般标准

Building works - Systems of external heat insulation with ventilated cladding - Part 1-2 : General criteria for selection of materials

OENORM EN 14024-2021 带隔热层的金属型材 机械性能 评估的要求、证明和试验

Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment

ASTM E330/E330M-14(2021) 用均匀静态气压差法测定外窗、门、天窗和幕墙结构性能的标准试验方法

1.1 This test method describes the determination of the structural performance of exterior windows, doors, skylights, and curtain walls under uniform static air pressure differences, using a test chamber. This test method is applicable to curtain wall assemblies including, but not limited to, metal, glass, masonry, and stone components.2 1.2 This test method is intended only for evaluating the structural performance associated with the specified test specimen and not the structural performance of adjacent construction. 1.3 The proper use of this test method requires a knowledge of the principles of pressure and deflection measurement. 1.4 This test method describes the apparatus and the procedure to be used for applying uniformly distributed test loads to a specimen. 1.4.1 Procedure A (see 11.2) shall be used when a loaddeflection curve is not required. 1.4.2 Procedure B (see 11.3) shall be used when a loaddeflection curve is required. 1.5 The text of this standard references notes and footnotes which provide explanatory materials. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 7. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference

T/CECS 926-2021 桁架加劲多腔体钢板组合剪力墙技术规程

主要技术内容包括：总则、术语和符号、基本规定、集成设计、结构类型、结构计算分析、桁架加劲多腔体钢板组合剪力墙设计、连接与节点设计、防护设计、施工、验收和使用维护等。

Technical specifications for truss-stiffened multi-cavity steel plate composite shear walls

PN-EN 16758-2021-10 E 幕墙—剪切连接强度的测定—试验方法和要求

Curtain walling -- Determination of the strength of sheared connections -- Test method and requirements

T/CECS 929-2021 纸蜂窝复合墙板应用技术规程

主要内容包括：总则、术语、材料、设计选用、安装施工、质量验收、维护和保养等。

Application technical specification for paper honeycomb composite wallboard

ASTM E3036-15(2021) 现场标记立面条件的标准指南

1.1 This guide consists of symbols and notations pertaining to documenting deficient conditions observed during facade inspections. 1.2 The purpose of this guide is to provide a quick shorthand, notation system that will serve as a uniform system for facade inspectors to record their observations on existing elevation drawings or photographs, or both, of existing building facades. 1.3 This guide is not intended to be used to record or document a diagnosis for the particular symptom. 1.4 Notations are listed in alphabetical order. Compound terms appear as per the first word as spoken. 1.5 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Notating Facade Conditions in the Field

T/CECS 10154-2021 陶粒发泡混凝土一体化墙板

本文件规定了陶粒发泡混凝土一体化墙板的术语和定义，分类、规格和标记，材料，要求，试验方法，检验规则，标志、随行文件、包装、运输与贮存。

Ceramsite foamed concrete integrated wall panel

T/CECS 915-2021 装配式空心板叠合剪力墙结构技术规程

主要技术内容包括：总则、术语和符号、基本规定、材料、建筑设计、结构设计、构件生产与运输、施工安装和质量验收等。

Technical specification for prefabricated hollow slab laminated shear wall structure

prEN 14024-2021 带隔热层的金属型材 机械性能 评估的要求、证明和试验

Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment

T/CECS 908-2021 混凝土异形柱-钢丝网架保温墙体复合结构应用技术规程

主要技术内容是：总则、术语和符号、材料、设计与构造、施工和验收。 

Technical specification for application of composite structure of concrete special-shaped column-steel wire grid insulation wall

LST EN 16758-2021 幕墙剪力连接强度的测定试验方法和要求

Curtain walling - Determination of the strength of shear connections - Test method and requirements

T/ZZB 2174-2021 建筑室内用预制金属面板复合墙体

本文件规定了建筑室内用预制金属面板复合墙体的术语和定义、分类、规格及标记、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存、质量与服务承诺等的要求。 本文件适用于建筑室内的非承重可拆装式隔断墙。

Prefabricated metal panel composite wall for building interior