91.060.10 墙、隔墙、面墙 标准查询与下载

T/CECS 1045-2022 自新风抗菌铝合金骨架复合墙体应用技术规程

主要内容包括：总则、术语、材料、设计、制作与安装、工程验收及使用维护管理。

Technical specification for the application of Zixinfeng antibacterial aluminum alloy skeleton composite wall

22/30441528 DC BS EN 12153 幕墙 透气性 测试方法

BS EN 12153. Curtain walling. Air permeability. Test method

DB34/T 4094-2022 江淮区域建筑发泡陶瓷板墙体保温应用技术规范

Technical specifications for application of foamed ceramic board wall insulation in buildings in the Jianghuai region

DB11/T 1832.11-2022 建筑工程施工工艺规程 第11部分：幕墙工程

Construction technology specification for building engineering Part 11: Curtain wall engineering

T/SDAS 353-2022 HS装配式加气混凝土复合保温外墙板应用技术规程

1.0.1为规范HS装配式加气混凝土复合保温外墙板的应用，做到安全适用、技术先进、经济合理，保证工程质量，制定本规程。 1.0.2本规程适用于抗震设防烈度8度及以下地区，民用与工业建筑HS装配式加气混凝土复合保温外墙板工程的设计、施工、验收及保养维修。 1.0.3HS装配式加气混凝土复合保温外墙板的设计、施工、验收及保养维修，除应执行本规程外，尚应符合国家、行业和山东省现行有关标准的规定。

Technical specification for application of HS assembled aerated concrete composite insulation exterior wall panel

T/SDAS 354-2022 HS装配式加气混凝土复合保温外墙板系统构造

本图集适用于抗震设防烈度8度及8度以下地区民用与工业建筑的非承重外墙工程。

HS prefabricated aerated concrete composite thermal insulation exterior wall panel system construction

T/CCMSA 70228-2022 光伏幕墙应用指南

为推动光伏幕墙在建筑中的应用，规范光伏幕墙的设计、安装，保证工程质量特制定本标准；以供设计、安装单位参考使用。 本标准适用于新建、改建和扩建的民用建筑光伏幕墙工程，以及在既有建筑上安装或改造为光伏幕墙工程的设计、安装和验收。 新建建筑上安装光伏幕墙应与主体建筑同步设计、施工和验收。既有建筑上增设光伏幕墙，应对建筑结构安全性进行复核。

Guide for PV curtain wall application

T/CECS 1014-2022 装配整体式齿槽剪力墙结构技术规程

主要技术内容包括：总则，术语，基本规定，材料，结构设计，预制构件制作、堆放、运输与检验，施工和工程验收。

Technical specification for assembled integral alveolar shear wall structure

T/ZZXJX 100-2021 轻质隔墙板应用技术规程

前  言　 1 范围　 2 规范性引用文件　 3 术语和定义　 4 基本规定　 5 材料　   5.1 条板　   5.2 配套材料及配件　 6 设计　   6.1 一般规定　   6.2 设计　   6.3 构造　 7 施工　   7.1 一般规定　   7.2 施工准备　   7.3 墙板安装　   7.4 管、线安装　   7.5 接缝及墙面整理　   7.6 安全施工　   7.7 墙体成品保护　 8 验收　   8.1 一般规定　   8.2 检验批验收　   8.3 分项工程验收　

Technical specification for the application of lightweight partition boards

T/ZZXJX 099-2021 蒸压陶粒混凝土轻质墙板应用技术规程

前  言　 1 范围　 2 规范性引用文件　 3 术语和定义　 4 基本规定　 5 材料　   5.1 条板　   5.2 配套材料及配件　 6 设计与构造　   6.1 一般规定　   6.2 设计与构造要求　 7 墙体施工　   7.1 一般规定　   7.2 施工准备　   7.3 墙板安装　   7.4 管、线安装　   7.5 接缝及墙面整理　   7.6 安全施工　   7.7 墙体成品保护　 8 墙体工程验收　   8.1 基本规定　   8.2 验收内容　

Technical specification for application of autoclaved ceramsite concrete lightweight wall panels

T/SHMHZQ 149-2021 装配式建筑用构造板技术要求

4 基本规定  5 材料  6 设计  7 施工  8 质量验收  9 施工安全与环境保护

Technical requirements for structural panels for prefabricated buildings

T/ZZXJX 083-2021 预制双面叠合混凝土剪力墙施工技术规程

前  言　 1 范围　 2 规范性引用文件　 3 术语和定义　 4 构件制作　   4.1 一般规定　   4.2 模具　   4.3 生产制作　   4.4 预制构件检验　   4.5 存放和运输　 5 结构施工　   5.1 一般规定　   5.2 安装准备　   5.3 安装施工　   5.4 施工安全与环境保护　 6 质量验收　   6.1 一般规定　   6.2 主控项目　   6.3 一般项目　

Construction technical specification for prefabricated double-sided laminated concrete shear wall

JG/T 579-2021 建筑装配式集成墙面

Building prefabricated integrated wall

T/CECS 962-2021 超大尺寸玻璃幕墙应用技术规程

主要技术内容包括：总则、术语、材料、设计、加工制作、安装施工、工程验收、维护保养等。

Technical specification for the application of super-large glass curtain wall

ASTM C1670/C1670M-21b 粘附的人造石砌体饰面单元的标准规范

1.1 This specification covers the minimum product requirements for adhered manufactured stone masonry veneer units applied as an adhered veneer to exterior and interior walls and structures suitable to receive units. 1.2 The property requirements of this specification apply at the time of delivery. This standard does not address the physical evaluation of installed units removed from service. 1.3 The units described by this specification are manufactured from a mixture of cement, normal or lightweight aggregates (or a combination of both), water, admixtures, other cementitious materials and other components which are wetcast into shapes simulating the appearance of natural stone and other textures. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.5 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes shall not be considered as requirements of the standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—When particular features are desired such as surface textures or color these features should be specified separately. Suppliers should be consulted as to the availability of units having the desired features. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Adhered Manufactured Stone Masonry Veneer Units

T/ZZXJX 063-2021 再生集料混凝土墙板应用技术规程

前  言　 1 范围　 2 规范性引用文件　 3 术语和定义　 4 材料　     4.1 一般规定　     4.2 原材料要求　     4.3 砂  浆　     4.4 配套材料及配件　 5 再生集料混凝土墙板墙体　     5.1 一般规定　     5.2 墙  板　     5.3 设计与构造　     5.4 墙体安装施工　 6 墙板墙体工程验收　     6.1 基本规定　     6.2 主控项目　     6.3 一般项目　

Technical specification for the application of recycled aggregate concrete wall panels

ASTM D7254-21 聚丙烯（PP）墙板的标准规范

1.1 This specification establishes requirements and test methods for materials, impact strength, appearance, surface flame spread, and wind load resistance of siding products manufactured from polypropylene material. Methods of indicating compliance with this specification are also provided. 1.2 The use of polypropylene recycled plastic in this product shall be in accordance with the requirements in Section 4. 1.3 Siding produced to this specification shall be installed in accordance with manufacturer’s installation instructions for the specific product to be installed. NOTE 1—Information with regard to siding maintenance shall be obtained from the manufacturer. 1.4 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information purposes only. 1.5 The following precautionary caveat pertains to the test method portion only, Section 6 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 2—There is no known ISO equivalent to this standard. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Polypropylene (PP) Siding

DIN EN 16758:2021 幕墙. 剪切连接强度的测定. 试验方法和要求; 德文版本EN 16758-2021

This document specifies test methods for the determination of bearing capacity (ultimate limit state and serviceability limit state), of connections between curtain walling framing members which cannot be calculated in accordance with current codes or conventional calculations ba

Curtain walling - Determination of the strength of shear connections - Test method and requirements; German version EN 16758:2021

T/CECS 931-2021 改性模塑聚苯板外墙保温工程技术规程

主要技术内容包括：总则、术语、基本规定、系统构造和性能、设计、施工及验收等。

Modified molded polystyrene board external wall insulation engineering technical specification

T/CECS 929-2021 纸蜂窝复合墙板应用技术规程

主要内容包括：总则、术语、材料、设计选用、安装施工、质量验收、维护和保养等。

Application technical specification for paper honeycomb composite wallboard