93.030 外部污水排放系统 标准查询与下载

GB/T 41332-2022 市政地下管线远程探测设备技术要求

本文件规定了市政地下管线远程探测的设备构成、技术要求、试验方法、检验规则、标志、包装、贮存和运输。 本文件适用于市政地下供水、排水、燃气、热力、电力、通信等地下管线及其附属设施的气体浓度与振动探测设备设计、制造与检验。

Technical requirements for remote detection equipment of municipal underground pipelines

GB 4284-2018 农用污泥污染物控制标准

本标准规定了城镇污水处理厂污泥农用时的污染物控制指标、取样、检测、监测和取样方法。 本标准适用于城镇污水处理厂污泥在耕地、园地和牧草地时的污染物控制。

Control standards of pollutants in sludge for agricultural use

GB/T 28888-2012 下水道及化粪池气体监测技术要求

本标准规定了下水道及化粪池气体监测种类和监测系统结构、要求、监测终端试验方法和监测终端检验规则等。 本标准适用于下水道及化粪池的有毒和可燃气体监测。污水泵站、污水处理厂、垃圾填埋场的气体监测可参照执行。

Technical requirements of gas monitoring for sewer and septic tanks

GB/T 25031-2010 城镇污水处理厂污泥处置 制砖用泥质

GB/T25031—2010 城镇污水处理厂污泥处置制砖用泥质本标准规定了城镇污水处理厂污泥制烧结砖利用的泥质、取样和监测。 本标准适用于城镇污水处理厂污泥的处置和污泥制烧结砖利用a

Disposal of sludge from municipal wastewater treatment plant.Quality of sludge used in making brick

GB/T 24602-2009 城镇污水处理厂污泥处置.单独焚烧用泥质

本标准规定了城镇污水处理厂污泥单独焚烧利用的泥质指标及限值、取样和监测等。 本标准适用于城镇污水处理厂污泥的处置和污泥单独焚烧利用。

Disposal of sludge from municipal wastewater treatment plant.Quality of sludge used in separate incineration

GB/T 24600-2009 城镇污水处理厂污泥处置.土地改良用泥质

本标准规定了城镇污水处理厂污泥土地改良利用的泥质指标及限制、取样和监测等。 本标准适用于城镇污水处理厂污泥的处置和污泥土地改良利用。 排水管道通挖污泥用于土地改良的泥质可参照本标准。

Disposal of sludge from municipal wastewater treatment plant.Quality of sludge used in land improvement

GB 24188-2009 城镇污水处理厂污泥泥质

本标准规定了城镇污水处理厂污泥泥质的控制指标及限值。 本标准适用于城镇污水处理厂的污泥。 居民小区的污水处理设施的污泥，可参照本标准执行。

Quality of sludge from municipal wastewater treatment plant

GB/T 23484-2009 城镇污水处理厂污泥处置.分类

本标准规定了城镇污水处理厂污泥处置方式的分类。 本标准适用于城镇污水处理厂污泥处置工程的建设、运营和管理。

Disposal of sludge from municipal wastewater treatment plant.Classification

GB/T 23486-2009 城镇污水处理厂污泥处置.园林绿化用泥质

本标准规定了城镇污水处理厂污泥园林绿化利用的泥质指标及限值、取样和监测等。 本标准适用于城镇污水处理厂污泥和污泥园林绿化利用。

Disposal of sludge from municipal wastewater treatement plant.Quality of sludge used in gardens or parks

GB/T 23485-2009 城镇污水处理厂污泥处置.混合填埋用泥质

本标准规定了城镇污水处理厂污泥进入生活垃圾卫生填埋场混合填埋处置和用作覆盖土的泥质指标、取样和监测等。 本标准适用于城镇污水处理厂污泥的处置和生活垃圾的混合填埋。

Disposal of sludge from municipal wastewater treatment plant.Quality of sludge for co-landfilling

GB 50334-2002 城市污水处理厂工程质量验收规范

本规范适用于新建、扩建、改建的城市污水处理厂工程施工质量验收。

Quality acceptance code for municipal sewage treatment plant engineering

GB 50335-2002 污水再生利用工程设计规范

本规范适用于以农业用水、工业用水、城镇杂用水、景观环境用水等为再生利用目标的新建、扩建和改建的污水再生利用工程设计。

Code for design of wastewater reclamation and reuse

T/QGCML 4192-2024 路面雨水排水系统

本文件规定了路面雨水排水系统的术语和定义、结构组成、系统组成、工作原理、材料要求、设计要求、维护与管理要求。 本文件适用于路面雨水排水系统的应用及检验。

Pavement rainwater drainage system

GSO ASTM D6783:2024 聚合物混凝土管的标准规范

This specification covers the testing and requirements fof polymer concrete pipes of specified lengths, intended for use in gravity-flow systems for conveying sanitary sewage, storm water, and industrial wastes. Although this specification is suited primarily for pipes to be installed by direct burial and pipe jacking, it may be used to the extent applicable for other installations such as slip-lining and rehabilitation of existing pipelines. Materials shall be appropriately sampled for purposes of testing their conformance to such requirements as: workmanship; dimension (diameter, length, thickness, straightness, roundness, and squareness of ends); three-edge bearing; hydrostatic pressure; compressive strength; chemical resistance; and joint tightness.

Standard Specification for Polymer Concrete Pipe

GSO ISO 23856:2024 压力和非压力供水、排水或污水处理用塑料管道系统 基于不饱和聚酯（UP）树脂的玻璃增强热固性塑料（GRP）系统

This document specifies the properties of piping system components made from glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). It is suited for all types of water supply, drainage and sewerage with or without pressure. Types of water supply include, but are not limited to, raw water, irrigation, cooling water, potable water, salt water, sea water, penstocks in power plants, processing plants and other water-based applications. This document is applicable to GRP UP piping systems, with flexible or rigid joints with or without end thrust load-bearing capability, primarily intended for use in direct buried installations. NOTE 1   For the purpose of this document, the term polyester resin (UP) also includes vinyl-ester resins (VE). NOTE 2   Piping systems conforming to this document can also be used for non-buried applications, provided the influence of the environment and the supports are considered in the design of the pipes, fittings and joints. NOTE 3   This document can also apply for other installations, such as slip-lining rehabilitation of existing pipes. NOTE 4   ISO 10467 and ISO 10639, which are replaced by this document, are also referenced in ISO 25780, which specifies requirements for GRP-pipes used for jacking installation. The requirements for the hydrostatic pressure design of pipes referring to this document meet the requirements of ISO/TS 20656-1 and the general principle for the reliability of structures detailed in ISO 2394 and in EN 1990. These International Standards provide procedures for the harmonization of design practices and address the probability of failure, as well as possible consequences of failures. The design practices are based on a partial safety factor concept, as well as on risk management engineering. This document is applicable to circular pipes, fittings and their joints of nominal sizes from DN 50 to DN 4000, which are intended to be used for the conveyance of water, sewage and drainage at normal service conditions, with or without pressure.

Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin

ASTM C1846/C1846M-19(2024) 钢筋混凝土涵洞、雨水排放管和下水道管的性能制造标准规范

Standard Specification for Performance Based Manufacture of Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

DB11/T 2235-2024 地下式污水处理厂技术规程

Technical regulations for underground sewage treatment plants

ASTM F2562/F2562M-24 无压力排水和下水道用钢增强热塑性带肋管和配件规范

Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage

T/GXAS 673-2024 污水排海泵站建设指南

本文件界定了污水排海泵站建设涉及的术语和定义，提供了污水排海泵站的运行流程、选址、建筑物、泵房、排海管道、仪表、控制系统、水质在线监测系统、火警系统、视频监控系统、周界入侵报警系统等建设内容的指导和建议。  本文件适用于污水排海泵站的建设。

Guidelines for construction of sewage discharge pumping station

ASTM C1628-19(2024) 使用橡胶垫圈的混凝土重力流污水管接头的标准规范

Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets