A43 化学 标准查询与下载

JIS K 0085:2014 烟气中溴化合物的测定方法

Methods for determination of bromine compounds in flue gas

ISO 11952:2014 表面化学分析. 扫描探针显微镜. 使用SPM测定几何量:测量系统校准

This International Standard specifies methods for characterizing and calibrating the scan axes of scanning-probe microscopes for measuring geometric quantities at the highest level. It is applicable to those providing further calibrations and is not intended for general industry use, where a lower level of calibration might be required. This International Standard has the following objectives: — to increase the comparability of measurements of geometrical quantities made using scanningprobe microscopes by traceability to the unit of length; — to define the minimum requirements for the calibration process and the conditions of acceptance; — to ascertain the instrument’s ability to be calibrated (assignment of a “calibrate-ability” category to the instrument); — to define the scope of the calibration (conditions of measurement and environments, ranges of measurement, temporal stability, transferability); — to provide a model, in accordance with ISO/IEC Guide 98-3, to calculate the uncertainty for simple geometrical quantities in measurements using a scanning-probe microscope; — to define the requirements for reporting results.

Surface chemical analysis - Scanning-probe microscopy - Determination of geometric quantities using SPM: Calibration of measuring systems

BS ISO 18115-2:2013 表面化学分析. 词汇. 扫描探针显微镜用术语

Surface chemical analysis. Vocabulary. Terms used in scanning-probe microscopy

ISO 18115-2:2013 表面化学分析.词汇表.第2部分:扫描-探针显微镜检查中应用的术语

This International Standard defines terms for surface chemical analysis. ISO 18115-1 covers general terms and those used in spectroscopy while this part of ISO 18115 covers terms used in scanning-probe microscopy.

Surface chemical analysis.Vocabulary.Part 2: Terms used in scanning-probe microscopy

DIN 32632-1:2013 化学分析.定量试验结果测量中不准确度的定量指南.第1部分:术语和策略

Chemical analysis - Guide to quantification of uncertainty in measurement of quantitative test results - Part 1: Terms and strategies

BS ISO 11505:2013 表面化学分析. 采用辉光放电光学发射光谱法量化组成深度描述的通用规程

Surface chemical analysis. General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry

ISO/TR 13329:2012 纳米材料.材料安全性数据表(MSDS)的准备

Nanomaterials - Preparation of material safety data sheet (MSDS)

ISO/TS 11931:2012 纳米技术.粉末状纳米级碳酸钙.特征和测量

Nanotechnologies - Nanoscale calcium carbonate in powder form - Characteristics and measurement

ISO/TS 11937:2012 纳米技术.粉末状纳米级二氧化钛.特征和测量

Nanotechnologies - Nanoscale titanium dioxide in powder form - Characteristics and measurement

IEC 113/179/CD:2012 ISO/TS 80004-2:纳米技术.词汇.第2部分:纳米物体:纳米颗粒,纳米纤维和纳米片

ISO/TS 80004-2: Nanotechnologies - Vocabulary - Part 2: Nano-objects: nanoparticle, nanofibre, and nanoplate

IEC 113/173/DTS:2012 IEC/TS 62607-4-1:纳米加工.关键控制特性.第4-1部分:锂离子电池用阴极纳米材料.电化学特性,2-极电池方法

IEC/TS 62607-4-1: Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for lithium ion batteries - Electrochemical characterisation, 2-electrode cell method

IEC 113/176/DTS:2012 ISO/TS 80004-8:纳米技术.词汇表.第8部分:纳米加工过程

ISO/TS 80004-8: Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes

ISO/TS 12025:2012 纳米材料.用气溶胶制作的纳米部件释放粉末的量化

Nanomaterials - Quantification of nano-object release from powders by generation of aerosols

ISO/TS 14101:2012 纳米材料特定毒性筛选用金纳米粒子的表面特性记述:傅立叶变换红外光谱(FT-IR)方法

Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method

DIN IEC 62607-3-1:2012 纳米加工.关键控制特性.第3-1部分:发冷光纳米材料.量子效率(IEC 113/130/CD-2011)

Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency (IEC 113/130/CD:2011)

ISO/TR 11811:2012 纳米技术.纳米级和微摩擦测量方法导则

Nanotechnologies - Guidance on methods for nano- and microtribology measurements

DIN ISO/TS 80004-5:2012 纳米技术.词汇表.第5部分:纳米/生物接口(ISO/TS 80004-5-2011)

Nanotechnologies - Vocabulary - Part 5: Nano/bio interface (ISO/TS 80004-5:2011)

DIN ISO/TS 80004-4:2012 纳米技术.词汇表.第4部分:纳米结构材料(ISO/TS 80004-4-2011)

Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS 80004-4:2011)

DIN ISO/TS 80004-7:2012 纳米技术.词汇表.第7部分:卫生保健的诊断治疗(ISO/TS 80004-7-2011)

Nanotechnologies - Vocabulary - Part 7: Diagnostics and therapeutics for healthcare (ISO/TS 80004-7:2011)

ISO/TS 10797:2012 纳米技术.利用透射电子显微镜法进行单壁碳纳米管特征探测

Nanotechnologies - Characterization of single-wall carbon nanotubes using transmission electron microscopy