E20 石油、天然气综合 标准查询与下载

MT/T 1196-2020 地面煤层气井压裂施工设计规范

Design specifications for fracturing construction of surface coalbed methane wells

SY/T 6935-2019 液化天然气接收站工程初步设计内容规范

Specification for preliminary design content of LNG receiving station project

SY/T 7408-2018 油气集输管道缓蚀剂涂膜及连续加注技术规程

Technical regulations for corrosion inhibitor coating and continuous filling of oil and gas gathering and transportation pipelines

SY/T 7434-2018 液化天然气接收站能力核定方法

Liquefied natural gas receiving station capacity verification method

DB34/T 1547-2018 液化石油气泄漏处置导则

本标准规定了液化石油气泄漏处置的术语和定义、泄漏处置通用要求、泄漏处置一般程序、泄漏处 置方法的选择与时机、泄漏处置技术、泄漏处置合格判定方法。 本标准适用于液化气石油气生产、贮存、充装、运输、使用等环节的特种设备泄漏事故的应急处置。

Guidelines for Disposal of Liquefied Petroleum Gas Spills

ISO 20815:2018 石油、石化和天然气工业. 生产保证和可靠性管理

This document describes the concept of production assurance within the systems and operations associated with exploration drilling, exploitation, processing and transport of petroleum, petrochemical and natural gas resources. This document covers upstream (including subsea), midstream and downstream facilities, petrochemical and associated activities. It focuses on production assurance of oil and gas production, processing and associated activities and covers the analysis of reliability and maintenance of the components. This includes a variety of business categories and associated systems/ equipment in the oil and gas value chain. Production assurance addresses not only hydrocarbon production, but also associated activities such as drilling, pipeline installation and subsea intervention. This document provides processes and activities, requirements and guidelines for systematic management, effective planning, execution and use of production assurance and reliability technology. This is to achieve cost-effective solutions over the life cycle of an asset development project structured around the following main elements: — production assurance management for optimum economy of the facility through all of its life cycle phases, while also considering constraints arising from health, safety, environment, and quality; — planning, execution and implementation of reliability technology; — application of reliability and maintenance data; — reliability-based technology development, design and operational improvement. The IEC 60300-3 series addresses equipment reliability and maintenance performance in general. This document designates 12 processes, of which seven are defined as core production assurance processes and addressed in this document. The remaining five processes are denoted as interacting processes and are outside the scope of this document. The interaction of the core production assurance processes with these interacting processes, however, is within the scope of this document as the information flow to and from these latter processes is required to ensure that production assurance requirements can be fulfilled. The only requirement mandated by this document is the establishment and execution of the production assurance programme (PAP). It is important to reflect the PAP in the overall project management in the project for which it applies. This document recommends that the listed processes and activities be initiated only if they can be considered to add value.

Petroleum, petrochemical and natural gas industries - Production assurance and reliability management

DZ/T 0317-2018 陆上石油天然气开采业绿色矿山建设规范

Green Mine Construction Specifications for Onshore Oil and Gas Exploitation Industry

NB/T 10043-2018 煤层气管理信息化数据结构规范

Coalbed methane management information data structure specification

EN 15181:2017 燃气炉具的能源消耗测量方式

This European Standard specifies the method of test for determining the gas energy consumption in gas-fired domestic ovens when they are being used in one or more of the oven cooking modes defined in 3.1. It applies to the gas-fired domestic ovens which are capable of utilizing gases of group H or group E, possibly after conversion according to instructions for use. This European Standard applies to these gas-fired domestic ovens, whether they are separate appliances or component parts of domestic cooking appliances. This European Standard also applies to domestic appliances that can utilize gas and/or electrical energy to provide heat for cooking when the ovens are utilizing gas energy to provide heat for cooking, but not when electric energy is used to provide any or all of the heat for cooking in the oven. It is not applicable to:- microwave combination ovens; - small cavities ovens (3.2); - oven cavities not provided with devices to detect and control the temperature for the preparation of food; - cooking modes others than defined in 3. and 3.; - ovens connected to a chimney in which the gas energy for cooking provides, by design, also space and/or water heating; - appliances designed for use with gases of the third family only. This European Standard is concerned neither with safety nor with overall performance requirements.

Measuring method of the energy consumption of gas fired ovens

EN 13110:2012+A1:2017 可运输可灌装液化石油气(LPG)焊接铝瓶-设计和制造

This European Standard specifies minimum requirements for material, design, construction and workmanship, testing and examination during the manufacture of transportable refillable welded aluminium liquefied petroleum gas (LPG) cylinders, having a water capacity from 0,5 l up to and including 150 l, exposed to ambient temperature.

LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction

EN 1839:2017 测定可燃气体和蒸汽的爆炸极限和极限氧浓度(LOC)

This European Standard specifies two test methods (method T and method B) to determine the explosion limits of gases, vapours and their mixtures, mixed with air or an air / inert gas mixture (volume fraction of the oxygen < 21 %) and the limiting oxygen concentration. This European Standard applies to gases, vapours and their mixtures at atmospheric pressure for temperatures up to 200 °C.

Determination of the explosion limits and the limiting oxygen concentration(LOC) for flammable gases and vapours

ASTM D8045-17 采用催化热滴定法测定原油和石油产品酸值的标准试验方法

5.1 Crude oils and oil sands bitumen contain naturally occurring acidic species. Acidity of crude oil has been implicated in corrosion of distribution and process systems. The relative amount of these materials can be determined by titrating with bases. The acid number is a measure of this amount of acidic substance in the oil under the conditions of the test. 5.2 Acid number of crude and distilled petroleum fractions has been measured by Test Method D664. Test Method D664 was developed for the analysis of lubricants and biodiesel. The titration solvent used in Test Method D664 does not properly address dissolving difficult samples such as crude oil, bitumen, and high wax samples addressed in this test method. Refer to Appendix X1. 5.3 Test Method D974 is also not applicable to measuring acidity of crudes and highly colored samples because the indicator is not visible or it is difficult to discern a color change to detect the end point of the titration. 1.1 This test method covers the determination of acidic components in crude oil and petroleum products including waxes, bitumen, base stocks, and asphalts that are soluble in mixtures of xylenes and propan-2-ol. It is applicable for the determination of acids whose dissociation constants in water are larger than 10–9; extremely weak acids whose dissociation constants are smaller than 10–9 do not interfere. The values obtained by this test method may not be numerically equivalent to other acid value measurements. The range of KOH acid numbers included in the precision statement is 0.18201;mg/g to 168201;mg/g. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Some specific hazards statements are given in Section 7 on Safety Precautions. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration

SY/T 7299-2016 石油天然气开采业低碳审核指南

Low carbon audit guide for the oil and gas extraction industry

SY/T 5851-2016 油田开发调整方案编制技术要求

Technical requirements for oilfield development adjustment plan preparation

SY/T 7290-2016 石油企业粉煤灰综合利用技术要求

Technical requirements for comprehensive utilization of fly ash in petroleum enterprises

SY/T 7291-2016 陆上石油天然气开采业清洁生产审核指南

Cleaner production audit guide for the onshore oil and gas extraction industry

SY/T 7297-2016 石油天然气开采企业二氧化碳排放计算方法

Calculation Method for Carbon Dioxide Emissions from Oil and Gas Extraction Enterprises

SY/T 6385-2016 覆压下岩石孔隙度和渗透率测定方法

Method for determination of rock porosity and permeability under overburden pressure

SY/T 7293-2016 环境敏感区天然气管道建设和运行环境保护要求

Environmental protection requirements for natural gas pipeline construction and operation in environmentally sensitive areas

SY/T 7295-2016 陆上石油天然气修井作业环境保护推荐作法

Recommended practices for environmental protection in onshore oil and gas well workover operations