E34 润滑油 标准查询与下载
共找到 1582 条与 润滑油 相关的标准，共 106 页
本标准规定了风力发电机组主传动增速齿轮箱齿轮油运行监督与维护管理的要求。 本标准适用于风力发电机组主传动增速齿轮箱齿轮油的维护与管理，发电厂其他设备用齿轮油也可参照执行。
Guide for operation and maintenance of gear oil in power plant
- ICS
- 27.100
- CCS
- E34
- 发布
- 2015-07-01
- 实施
- 2015-12-01
本标准规定了液力传动油的类别、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于液力偶合器和液力变矩器（非公路设备用）用液力传动油，由深度精制或加氢基础油为组分油，加入增黏、抗氧、防锈、抗磨及抗泡等添加剂调制而成的液力传动油。
Hydraulic lubricant
- ICS
- 75.100
- CCS
- E34
- 发布
- 2015-04-30
- 实施
- 2015-10-01
本标准规定了抗燃油中氯含量的氧弹测定方法。本标准适用于抗燃油中氯含量的测定，但油中不应含有其他卤素和一些能生成不溶性氯化物的银、汞等金属元素。
Determination of chlorine content in phosphate ester fire-resistant fluids (Bomb method)
- ICS
- 27.100
- CCS
- E34
- 发布
- 2015-04-02
- 实施
- 2015-09-01
Testing of lubricants - Testing in the four-ball tester - Part 3: Determination of wearing characteristics of liquid lubricants
- ICS
- 75.100
- CCS
- E34
- 发布
- 2015-03
- 实施
Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
- ICS
- 75.100
- CCS
- E34
- 发布
- 2015-03
- 实施
Testing of lubricants - Testing in the four-ball tester - Part 2: Determination of welding load of liquid lubricants
- ICS
- 75.100
- CCS
- E34
- 发布
- 2015-03
- 实施
- 2015-03-01
Lubricating oils. Determination for high temperature foaming characteristics
- ICS
- 75.100
- CCS
- E34
- 发布
- 2015
- 实施
- 2017-01-01
Transmission oils. Classification and designation
- ICS
- 75.100
- CCS
- E34
- 发布
- 2015
- 实施
- 2017-01-01
Lubricating oils and additives. Determination of phosphorus
- ICS
- 75.100
- CCS
- E34
- 发布
- 2015
- 实施
- 2017-01-01
Lubricants. Determination of the coefficient of friction, resistant to wear and extreme pressure performance using SRV testing machine
- ICS
- 75.160.20
- CCS
- E34
- 发布
- 2015
- 实施
- 2017-01-01
Lubricating oils. Method for determination of phosphorus, sulfur, calcium and zinc by energy dispersive X-ray fluorescence spectroscopy
- ICS
- 75.100
- CCS
- E34
- 发布
- 2015
- 实施
- 2017-01-01
This International Standard specifies a method of determining the shear stability of polymer-containing lubricating oils by the four-ball machine as specified in ISO 20623, but using a tapered roller bearing. The test results allow prediction of the in-service permanent viscosity loss. NOTE Other International Standards exist which evaluate viscosity loss of polymer-containing oils. The method specified within this International Standard subjects fluids to a higher shear rate than, for example, the diesel injector nozzle shear test described within ISO 20844.[3] It is particularly appropriate for lubricants being used in high shear applications, such as components with gears and roller bearings. In such applications, the shear rate in the ISO 20844 test method can be too low to generate a realistic permanent loss in viscosity of the fluid.
Petroleum and related products - Determination of shear stability of lubricating oils containing polymers - Method using a tapered roller bearing
- ICS
- 75.100
- CCS
- E34
- 发布
- 2014-12
- 实施
Testing of lubricants - Test methods - Part 1: Determination of total base number
- ICS
- 75.100
- CCS
- E34
- 发布
- 2014-11
- 实施
Quantitative analysis method of mineral oil content in petroleum lubricants
- ICS
- 71.04
- CCS
- E34
- 发布
- 2014-10-29
- 实施
- 2014-12-01
本标准规定了用SRV试验机在高频线性往复运动条件下测定润滑油极压性能的试验方法。本标准适用于液压油、齿轮油和发动机油等。
Standard test method for determining extreme pressure properties of lubricating oils using SRV test machine
- ICS
- 75.100
- CCS
- E34
- 发布
- 2014-06-29
- 实施
- 2014-11-01
本标准规定了使用丹尼森T6H20C混合泵评定液压液性能的试验方法。本标准适用于液压液过滤性、热稳定性、剪切安定性、抗腐蚀性及抗磨损性等综合性能的评定。
Test equipment & instructions for hydraulic fluids performance evaluation on Parker pumps (Vane and Piston)
- ICS
- 75.100
- CCS
- E34
- 发布
- 2014-06-29
- 实施
- 2014-11-01
本标准规定了带有废气循环(EGR)的重负荷柴油机在高烟炱条件下柴油机油的抗阀系磨损、抗活塞顶环磨损、抑制油泥沉积生成倾向和机油滤清器堵塞性能的评定方法。本标准适用于API CH-4、CI-4、CI-4和CJ-4等柴油机油的评定。
Standard test method for Cummins ISM test
- ICS
- 75.100
- CCS
- E34
- 发布
- 2014-06-29
- 实施
- 2014-11-01
本标准规定了采用波长色散X射线荧光光谱法测定润滑油及添加剂中的钙、氯、铜、镁、磷、硫和锌的含量的方法。本标准适用于测定润滑油、添加剂和复合剂中钙、氯、铜、镁、磷、硫和锌的含量。当样品中元素浓度超出标准曲线的上限时,可以经过稀释后再检测。
Standard test method for determination of calcium, chlorine, copper, magnesium ,phosphorus, sulfur, and zinc in unused lubricating oils and additives by wavelength dispersive X-ray fluorescence spectrometry (mathematical correction procedure)
- ICS
- 75.100
- CCS
- E34
- 发布
- 2014-06-29
- 实施
- 2014-11-01
本标准规定了采用准双曲面齿轮驱动桥在有水存在和加温条件下,测定车辆齿轮油的抗锈蚀性能的试验方法。本试验标准通常称为L-33-1试验。本标准适用于测定车辆齿轮油的抗锈蚀性。
Standard test method for evaluation of moisture corrosion resistance of automotive gear lubricants
- ICS
- 75.100
- CCS
- E34
- 发布
- 2014-06-29
- 实施
- 2014-11-01
本标准规定了通过测定氧化前后油中金属含量来表征试样腐蚀性能的试验方法。本标准适用于检测柴油机油对柴油机中凸轮随动件和轴承所含的铜、铅等金属的腐蚀倾向。
Standard test method for evaluation of corrosiyeness of diesel engine oil at 121℃
- ICS
- 75.100
- CCS
- E34
- 发布
- 2014-06-29
- 实施
- 2014-11-01
