F81 通用核仪器 标准查询与下载

ANSI N323A/B-2013 辐射防护仪器试验和校准.便携式测量仪器

Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments

NB/T 20076-2012 核电厂地震仪表准则

本标准规定了安装在核电厂的地震仪表系统的最低要求。 本标准适用于陆上轻水堆核电厂用于监测的地震仪表系统，其他类型核设施的地震仪表系统也可参考执行。 本标准不适用于： a) 在达到预定地面加速度时，自动触发停闭核电厂的地震仪表系统； b) 地震仪表记录评估的程序和数据处理。

Earthquake instrumentation criteria for nuclear power plants

NB/T 20077-2012 核电厂地震仪表记录的处理和初步评估

本标准规定了核电厂地震仪表记录数据及时获取、处理和存储的准则，包括初始的评估准则，判断厂址的地震动是否超过电厂运行基准地震（0BE)。 本标准适用于陆上轻水堆核电厂，其他类型核电厂也可参考使用。 本标准不适用于下列程序： a) 在地震后需要立即执行的电厂巡检程序（8h内）； b) 确保安全、有序停堆的程序； c) 构筑物和设备响应数据的长期评估的程序； 电厂重新运行的程序。

Criteria for the handling and initial evaluation of records from nuclear power plants seismic instrumentation

ANSI N42.42-2012 国家安全用辐射探测器数据格式标准

Specifies the data format that shall be used for both required and optional data available at the output of radiation instruments for homeland security applications. The performance requirements for these types of instruments are described in other standards; such as, ANSI/IEEE N42.32, ANSI/IEEE N42.33, ANSI/IEEE N42.34, ANSI/IEEE N42.35, and ANSI/IEEE N42.38.

Data Format Standard for Radiation Detectors Used for Homeland Security

IEEE/ANSI N42.42-2012 国家安全用辐射探测器数据格式的美国国家标准

American National Standard Data Format for Radiation Detectors Used for Homeland Security

IEEE N42.42-2012 国家安全用辐射探测器数据格式的美国国家标准

Data Format for Radiation Detectors Used for Homeland Security

JIS Z 4202:2011 盖格-弥勒计数管

Geiger-Muller counter tubes

BS IEC 62523:2010 防辐射仪器.货物/车辆射线照相检验系统

Radiation protection instrumentation - Cargo/vehicle radiographic inspection system

IEC 60462:2010 核监测仪表.闪烁计数用光电倍增管.试验规程

This International Standard establishes test procedures for photomultiplier tubes (PMT) for scintillation and Cherenkov detectors. This standard is applicable to photomultiplier tubes for scintillation and Cherenkov detectors. Photomultiplier tubes are extensively used in scintillation and Cherenkov counting, both in the detection and analysis of ionizing radiation and for other applications. For such uses, various characteristics are of particular importance and require additional tests to those conducted to measure the general characteristics of PMT. This has made desirable the establishment of standard test procedures so that measurements of these specific characteristics may have the same significance to all manufacturers and users. The tests described in this standard for PMT to be used in scintillation detectors are supplementary to those tests described in IEC 60306-4, which covers the basic characteristics commonly requiring specification for photomultiplier tubes. This recommendation is not intended to imply that all tests and procedures described herein are mandatory for every application, but only that those tests carried out on PMT for scintillation and Cherenkov detectors should be performed in accordance with the procedures given in this standard.

Nuclear instrumentation - Photomultiplier tubes for scintillation counting - Test procedures

NB/T 20019-2010 核电厂安全级仪表和控制设备电子元器件老化筛选和降额使用规定

本标准规定了对核电厂安全级仪表和控制设备中电子元器件进行老化筛选和降额使用时的技术要求。 本标准适用于核电厂安全级仪表和控制设备的电子元器件老化筛选及降额使用，也可供其它安全级电气设备的电子元器件老化筛选及降额使用时参照或参考使用。

Ageing,screening,and derating, rules of electronic elements and devices in safety class instrument and control equipment of nuclear power plants

KS C IEC 60759:2009 半导体X射线能谱仪的标准试验程序

이 표준은 반도체 X-선 에너지 분광계에 대한 표준 시험절차를 제시한다. 해당 계통은 반도

Standard test procedures for semiconductor X-ray energy spectrometers

KS C IEC 60739:2009 数字式计数率表.特性和试验方法

이 표준은 계수관이나 핵분열 전리함(fission ionization chamber)과 같

Digital counting ratemeters－Characteristics and test methods

KS C IEC 62117:2009 核反应堆仪表.加压轻水反应堆(PWR).冷停过程中堆芯充分冷却的监测

이 표준은 그림 1 및 그림 2와 같은 구성과 유사한 구성의 가압경수로(PWR)에 적용되며

Nuclear reactor instrumentation- Pressurized light water reactors(PWR)- Monitoring adequate cooling within the core during cold shutdown

KS C IEC 60650:2009 模拟计数率表.特性和试验方法

이 표준은 계수관이나 핵분열 전리함과 같은 검출기에 의해 생성되는, 약 0.1에서 약 10

Analogue counting ratemeters-Characteristics and test methods

ANSI N13.35-2009 瓶状人体模型生物标定辐射剂量规范

This standard provides the specifications for the design, fabrication, and quality of new BOMAB phantoms. It is not intended to be applied to phantoms manufactured prior to the issuance of this standard.

Specifications for the Bottle Manikin Absorption Phantom

NF C19-110:2008 核仪表.放射性测量仪表的结构要求和分类

Nuclear instrumentation - Constructional requirements and classification of radiometric gauges.

ANSI N13.32-2008 放射量测定器的性能检测

This ANS provides a procedure for testing the performance of extremity personnel dosimetry systems used to monitor the personnel exposure to the extremities from ionizing radiation.

Performance Testing of Extremity Dosimeters

BS ISO 6980-1:2006 核能.β粒子辐射基准源.生产方法

This part of ISO 6980 specifies the requirements for reference beta radiation fields produced by radionuclide sources to be used for the calibration of personal and area dosemeters and dose-rate meters to be used for the determination of the quantities Hp(0,07) and H'(0,07), and for the determination of their response as a function of beta particle energy and angle of incidence. It gives the characteristics of radionuclides that have been used to produce reference beta radiation fields, gives examples of suitable source constructions and describes methods for the measurement of the residual maximum beta particle energy and the dose equivalent rate at a depth of 0,07 mm in the International Commission on radiation units and measurements (ICRU) sphere. The energy range involved lies between 66 keV1) and 3,6 MeV and the dose equivalent rates are in the range from about 10 μSv h-1 to at least 10 Sv h-1. In addition, for some sources variations of the dose equivalent rate as a function of the angle of incidence are given. This part of ISO 6980 proposes two series of beta reference radiation fields, from which the radiation necessary for determining the characteristics (calibration and energy and angular dependence of response) of an instrument can be selected. Series 1 reference radiation fields are produced by radionuclide sources used with beam flattening filters designed to give uniform dose equivalent rates over a large area at a specified distance. The proposed sources of 90Sr + 90Y, 85Kr, 204TI and 147Pm produce maximum dose equivalent rates of approximately 200 mSv h_1. Series 2 reference radiation fields are produced without the use of beam-flattening filters, which allows large area planar sources and a range of source-to-calibration plane distances to be used. Close to the sources, only relatively small areas of uniform dose rate are produced, but this series has the advantage of extending the energy and dose rate ranges beyond those of Series 1. The radionuclides used are those of series 1 with the addition of the radionuclides 14C and 106Ru + 106Rh; these sources produce dose equivalent rates of up to10Svh-1.

Nuclear energy - Reference beta-particle radiation - Methods of production

ANSI N42.34-2006 放射性核素检测和识别用手持式仪器的性能标准

This standard applies to hand-held instruments used for the detection and identification of radioactive isotopes and for indication of gamma dose rate. Instruments covered by this standard are not intended to provide accurate measurement of dose rate. Th

Performance Criteria for Hand-held Instruments for the Detection and Identification of Radionuclides

ANSI N42.33-2006 国家安检用便携式辐射检测仪器

This standard establishes performance and design criteria, test and calibration requirements, and operating and training instruction requirements for portable radiation detection instruments used for detection and measurement of radioactive substances fo

Portable Radiation Detection Instrumentation for Homeland Security