G34 合成橡胶基础标准与通用方法 标准查询与下载
共找到 1828 条与 合成橡胶基础标准与通用方法 相关的标准，共 122 页
Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1: Determination of Mooney viscosity
- ICS
- 83.060
- CCS
- G34
- 发布
- 2014-02
- 实施
Rubber, vulcanized or thermoplastic -- Determination of stain properties (Amendment 1)
- ICS
- 83.060
- CCS
- G34
- 发布
- 2013-09-20
- 实施
This International Standard outlines the principles of calibration of rubber test equipment and gives guidance on the general requirements for ensuring measurement traceability, establishing the basis for deciding calibration intervals, and estimating measurement uncertainty. Methods of calibration for a range of parameters applicable to rubber test equipment are briefly described with reference to relevant standards where appropriate.
Rubber - Guide to the calibration of test equipment
- ICS
- 83.060
- CCS
- G34
- 发布
- 2013-07-01
- 实施
Rubber, vulcanized or thermoplastic. Determination of tension set underconstant elongation, and of tension set, elongation and creep underconstant tensile load
- ICS
- 83.060
- CCS
- G34
- 发布
- 2013-06-30
- 实施
- 2013-06-30
Rubber, vulcanized or thermoplastic. Determination of low-temperature stiffening (Gehman test)
- ICS
- 83.060
- CCS
- G34
- 发布
- 2013-06-30
- 实施
- 2013-06-30
This Technical Specification specifies a qualitative method of thermodesorption - gas chromatography -mass spectrometry (TD-GC-MS) for the identification of volatile components in rubber fumes, after trapping on a solid sorbent based on 2,6-diphenylphenylene-oxide polymer resin. It is applicable to a screening of emissions from the processing of rubber compounds in the ambient workplace and storage environment.
Rubber - Trapping and identification of volatile components of rubber fumes with active sampling on a poly(2,6-diphenylphenylene oxide) type sorbent, using thermodesorption and gas chromatographic method with mass spectrometric detection
- ICS
- 83.060
- CCS
- G34
- 发布
- 2013-06-15
- 实施
This International Standard specifies the methods to be used to determine the content of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers in the 0,1 % to 10 % range.
Rubber - Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
- ICS
- 83.060
- CCS
- G34
- 发布
- 2013-05-15
- 实施
This European Standard deals with all significant hazards, hazardous situations and events relevant to the design and construction of winding machines used for the winding and/or unwinding and/or rewinding and/or slitting of film or sheet manufactured from rubber, plastic and composite materials, when the machines are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). A machine used for winding or rewinding (winder or rewinder) begins at the intake of the film or sheet into the winding machine and ends at the discharge position of the reel(s). A machine used for unwinding (unwind) begins at the take-up position of the reel(s) and ends at the film or sheet take-off point. A machine used for unwinding, slitting and re-winding (slitter rewinder) begins at the take-up position of the reel(s) and ends at the discharge positions of the reel(s) and covers one or more integrated slitting/cutting units. In some machines the winding, unwinding, rewinding and slitting functions may be combined. Hazards due to electro-magnetic radiation, e. g. from the use of thickness monitoring devices, are not covered by this European Standard. Toxic or chemical hazards and hazards due to dusts, fumes or gases, which could occur from the materials being wound, unwound, slit or rewound are not covered by this European Standard. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC. This European Standard is not applicable to winding machines which are manufactured before the date of its publication.
Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
- ICS
- 83.200
- CCS
- G34
- 发布
- 2013-05-01
- 实施
- 2013-05
本标准规定了夹层玻璃用聚乙烯醇缩丁醛(PVB)胶片的术语和定义、产品分类、技术要求、试验方法、检验规则以及标志、包装、运输和贮存等。本标准适用于建筑夹层玻璃、汽车夹层玻璃用聚乙烯醇缩丁醛(PVB)胶片。其他夹层玻璃用胶片可参照执行。
Polyvinyl butyral (PVB) interlayer for laminated glass
- ICS
- 81.040.30
- CCS
- G34
- 发布
- 2013-04-25
- 实施
- 2013-09-01
Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression. Testing with temperature cycling
- ICS
- 83.060
- CCS
- G34
- 发布
- 2013-03-31
- 实施
- 2013-03-31
Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
- ICS
- 83.060
- CCS
- G34
- 发布
- 2013-03-13
- 实施
- 2013-03-13
SN/T 3470的本部分规定了采用自动分析仪测定丙烯腈-丁二烯橡胶(NBR)中结合丙烯腈含量的方法，即凯氏定氮法。本部分适用于采用自动分析仪测定丙烯腈-丁二烯橡胶(NBR)中结合丙烯腈的含量。
Rubber,raw.Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber(NBR).Part 2:Kjeldahl method
- ICS
- CCS
- G34
- 发布
- 2013-03-01
- 实施
- 2013-09-16
SN/T 3470的本部分规定了采用自动元素分析仪测定丙烯腈-丁二烯橡胶(NBR)中结合丙烯腈含量的方法。本部分适用于丙烯腈-丁二烯橡胶(NBR)和胶乳中结合丙烯腈的含量。
Rubber,raw.Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber(NBR).Part 1:Combustion method
- ICS
- CCS
- G34
- 发布
- 2013-03-01
- 实施
- 2013-09-16
Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
- ICS
- 83.060
- CCS
- G34
- 发布
- 2013-01
- 实施
4.1 The surface of white or light-colored vulcanized rubber articles, or vulcanized rubber covered with an organic finish, may discolor when exposed to conditions of humidity, or moisture, heat, and sunlight. This change in color of light-colored rubber surfaces is objectionable to the consumer. 4.2 Results obtained should be treated only as indicating the effect of irradiance from the specified source (either UVA-340 lamps or a xenon arc with a Daylight Filter) and not as equivalent to the result of any natural exposure, unless the degree of quantitative correlation has been empirically established for the material in question. 4.3 This test method may be used for producer-consumer acceptance, referee purposes, and research and development work. 1.1 This test method covers techniques to evaluate the surface discoloration of white or light-colored vulcanized rubber that may occur when subjected to UV or UV/visible exposure from specified sources under controlled conditions of relative humidity, or moisture, and temperature. 1.2 This test method also describes how to qualitatively evaluate the degree of discoloration produced under such conditions. 1.3 The term “discoloration” applies to a color change of the rubber sample, as distinguished from staining (see Note 1), that refers to a color change of a metal finish in contact with or adjacent to the rubber specimen. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1—Tests for staining are covered by Test Methods D925.
Standard Test Method for Rubber Deteriorationmdash;Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
- ICS
- 83.060 (Rubber)
- CCS
- G34
- 发布
- 2013
- 实施
1.1 이 표준은 단봉법에 의한 섬유 강화 플라스틱 복합 재료의 겉보기 층간 전단 강도의
Fibre-reinforced plastic composites-Determination of apparent interlaminar shear strength by short-beam method
- ICS
- 83.120
- CCS
- G34
- 发布
- 2012-12-24
- 实施
- 2012-12-24
1.1 이 표준은 섬유 강화 플라스틱 복합 재료의, 적층면에 평행한 방향으로의 압축성을 측
Fibre-reinforced plastic composites－Determination of compressive properties in the in-plane direction
- ICS
- 83.120
- CCS
- G34
- 发布
- 2012-12-24
- 实施
- 2012-12-24
1.1 이 표준은 3-점(방법 A) 및 4-점(방법 B) 하중을 적용하였을 때 섬유 강화
Fibre-reinforced plastic composites－Determination of flexural properties
- ICS
- 83.120
- CCS
- G34
- 发布
- 2012-12-24
- 实施
- 2012-12-24
