共找到 597 条与 胶粘剂 相关的标准,共 40 页
Water-based acrylic pressure-sensitive adhesive for adhesive products
Lithium battery electrode protection adhesive tape
Low modulus adhesives for exterior tile finishing
Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding
Adhesives for thermoplastic piping systems for fluids under pressure - Specifications; German version EN 14814:2016
Testing of adhesives for metals and of bonded metal joints - Torsional shear test
Adhesives for thermoplastic piping systems for fluids under pressure. Specifications
本标准规定了车灯用有机硅密封胶的术语和定义,要求,试验方法,检验规则以及标志、包装、运输和贮存。 本标准适用于以聚硅氧烷为基胶,加入添加剂配制而成的室温固化车灯用有机硅密封胶。
Silicone sealants for automotive lighting
Automotive paper filter hot melt adhesive (2016)
Car paper filter hot melt adhesive Part 1: Air filter hot melt adhesive
本标准规定了静电植绒胶粘剂的分类,要求,试验方法,检验规则以及标志、包装、运输和贮存。 本标准适用于汽车用静电植绒双组分聚氨酯胶粘剂、纺织品用静电植绒丙烯酸酯胶粘剂。双组分聚氨酯静电植绒胶粘剂主要用于汽车密封条、挡水条、行李箱的静电植绒;丙烯酸酯静电植绒胶粘剂主要用于静电植绒布生产中绒毛和底布之间的粘合,也适用于涤纶装饰品或工艺品的花式图案植绒。
Adhesives for electrostatic flocking
本标准规定了橡胶地板用胶粘剂的分类和标记,要求,试验方法,检验规则以及标志、包装、运输和贮存。 本标准适用于粘接橡胶地板的胶粘剂。
Adhesives for rubber floor
本标准规定了上光膜压敏胶粘带的术语和定义,分类,要求,试验方法,检验规则以及标志、包装、运输和贮存。 本标准适用于以BOPP膜、PET膜为基材,单面涂布压敏胶粘剂的卷状胶粘带。主要用于印刷商标标签、包装纸、包装盒、书籍课本封面、字画、印刷品等表面覆膜以及条码喷印。
Over laminated pressure sensitive adhesive tape
Automotive Paper Filter Hot Melt Adhesive Part 2: Fuel Filter Hot Melt Adhesive
本标准规定了纺织品用热熔胶粘剂的术语和定义,产品分类和标记,技术要求,试验方法,检验规则以及包装、标志、运输和贮存。 本标准适用于纺织品用共聚酰胺类、共聚酯类、聚乙烯类(高密度聚乙烯、低密度聚乙烯)、乙烯-乙酸乙烯酯共聚物、热塑性聚氨酯类热熔胶粘剂。
Hot-melt adhesives for textiles
Adhesives for non-pressure thermoplastic piping systems - Specifications; German version EN 14680:2015
Adhesives for non-pressure thermoplastics piping systems. Specifications
This European Standard specifies the requirements and test methods for adhesives used for joining the components of unplasticised poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride)(PVC-C), acrylonitrile -butadiene-styrene (ABS) and styrene copolymer blends (PVC+SAN) thermoplastic piping systems for non-pressure applications (e. g. soil and waste discharge), independent of the application area.
Adhesives for non-pressure thermoplastics piping systems - Specifications
Adhesives for resilient, textile and laminate floor coverings
General purpose adhesives for structural assembly - Requirements and test methods; German version EN 15274:2015
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号