G39 胶粘剂 标准查询与下载

NF T76-002*NF EN 1240:2011 粘接剂.羟基值和/或含量的测定

Adhesives - Determination of hydroxyl value and/or hydroxyl content.

QC/T 852-2011 汽车用折边胶

本标准规定了汽车用折边胶粘剂的分类、技术要求、试验方法、检验规则、标志、运输、储存。 本标准适用于汽车焊装工艺过程中车门、发动机罩、后备箱（门）罩等的内、外板卷边搭接部位用的汽车折边胶。

Hemming adhesive for automobile

QC/T 851-2011 汽车用补强胶片

本标准规定了汽车用补强胶片的术语和定义、分类和标记、技术要求、试验方法、检验规则、标志、运输、储存。 本标准适用于汽车发动机罩、车门、车顶、侧围板、后备箱（门）罩等外板内侧面粘贴用成型补强胶片。

Reinforcement adhesive sheet for automobile

HG/T 2727-2010 聚乙酸乙烯酯乳液木材胶粘剂

本标准规定了聚乙酸乙烯酯乳液木材胶粘剂分类、要求、抽样方法、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于聚乙酸乙烯酯乳液木材胶粘剂。

Polyvinyl acetate emulsion adhesives for woods

HG/T 4139-2010 压敏胶粘制品用防粘材料

本标准规定了压敏胶粘制品用防粘材料的分类、要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于以特种纸或薄膜等材料为基材,单面或双面涂有防粘剂的防粘材料。

Release materials for pressure sensitive adhesive products

QB/T 4087-2010 食用明胶

本标准规定了食用明胶的分类、要求、试验方法、检验规则和标志、包装、运输、贮存、保质期。 本标准适用于以动物的皮、骨等为原料所生产的作为食品的明胶。

Edible gelatin

KS M ISO 9664:2010 粘合剂.拉伸剪切胶粘件疲劳性能的试验方法

이 표준은 주어진 금속소지 위에 도포되어 있는 구조용 접착제의 특성을 평가할 목적으로, 규

Adhesives－Test methods for fatigue properties of structural adhesives in tensile shear

BS PD CEN/TR 15990:2010 数据表.鞋类试验材料和试验粘合剂

For research, development and quality certification purposes, some simply formulated 1- and 2-part "reference test adhesives" have been developed and, from the most important and most often applied, some materials have been selected as "reference test materials". This technical report offers for each of these reference test adhesives and reference test materials some information and specify some properties. CEN/TC 193/WG 5 takes care for a continuous updating of these data sheets.

Data Sheets — Footwear Tests Materials and Test Adhesives

KS M ISO 10964:2010 粘合剂.螺纹紧固件上厌氧粘合剂的抗扭强度的测定

이 표준에 따른 시험방법은 나사 조립품(threaded assemblies)에 사용되는 혐

Adhesives-Determination of torque strength of anaerobic adhesives on threaded fasteners

KS M ISO 9665:2010 粘合剂.动物胶.取样和试验方法

이 표준은 미분, 입상, 펄 또는 입방체 형태의 뼈와 피부 아교의 시료 채취와 시험방법에

Adhesives－Animal glues－Methods of sampling and testing

DIN EN 15416-3:2010 酚和氨基塑料除外的负荷轴承木结构用粘结剂.试验方法.第3部分:带弯曲剪切载荷的试样在循环气候条件下蠕变试验.德文版本EN 15416-3-2007+A1-2010

Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear; German version EN 15416-3:2007+A1:2010

ANSI/ASTM F493:2010 氯化聚氯乙烯(CPVC)塑料管及配件用溶剂粘结剂规范

Specification For Solvent Cements For Chlorinated Poly Vinyl Chloride Cpvc Plastic Pipe And Fittings

HG/T 2814-2009 溶剂型聚酯聚氨酯胶粘剂

本标准规定了溶剂型聚酯聚氨酯胶粘剂的技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于绝缘材料粘接用A、B双组分室温固化的溶剂型聚酯聚氨酯胶粘剂。

Solvent-based polyester polyurethane adhesives

ISO 26842-1:2009 粘合剂.室内木制品用粘合剂评估和选择的测试方法.第1部分:非恶劣环境中测定的阻力

Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 1: Resistance to delamination in non-severe environments

DIN EN 15425:2008 粘合剂.承载木结构用单组分聚氨酯.分类和性能要求

This European Standard establishes a classification for one component polyurethane adhesives according to their suitability for use in pre-fabricated timber components for structural use in defined climatic exposure conditions, and specifies performance requirements for such adhesives for the industrial manufacture of load- bearing timber structures only. The performance requirements of this European Standard apply to the adhesive only, not to the structure. This European Standard does not primarily cover the performance of adhesives for the production of wood- based panels. This European Standard is primarily intended for the use of adhesive manufacturers and for the use in timber structures bonded with adhesives, to assess or control the quality of adhesives. This European Standard only specifies the performance of an adhesive for use in an environment corresponding to the defined conditions. Such an adhesive meeting the requirements of this European Standard for its type is adequate for use in a load-bearing timber structure, provided that the bonding process has been carried out according to an appropriate product standard.

Adhesives - One component polyurethane for load bearing timber structures - Classification and performance requirements; German version EN 15425:2008

DIN EN 1942:2008 自粘结胶带.厚度的测量

This European Standard specifies a method on how to measure the total thickness of both the backing and adhesive layer comprising an adhesive tape.

Self adhesive tapes - Measurement of Thickness; English version of DIN EN 1942:2008-06

DIN EN 923:2008 胶粘剂.术语和定义

This European Standard defines terms used in the adhesive industry and terms relating to adhesives in those industries that use adhesives.

Adhesives - Terms and definitions(includes Amendment A1:2008); English version of DIN EN 923:2008-06

BS EN 1942:2008 自胶粘带.厚度测量

This European Standard specifies a method on how to measure the total thickness of both the backing and adhesive layer comprising an adhesive tape.

Self adhesive tapes — Measurement of thickness

LY/T 1206-2008 木工用氯丁橡胶胶粘剂

本标准规定了木工用溶剂型氯丁橡胶胶粘剂的术语和定义、技术要求、试验方法、检验规则及标志、包装、运输和贮存等。 本标准适用于以氯丁橡胶为基料，填加改性剂、助剂和溶剂制造而成的溶剂型氯丁橡胶胶粘剂。本产品主要用于室内术质材料或木质材料与其他材料的粘接。

Chloroprene rubber adhesive for wood working

DIN EN 15416-3:2008 酚和氨基塑料除外的负荷轴承木结构用粘结剂.试验方法.第3部分:带弯曲剪切载荷的试样在循环气候条件下蠕变试验

This European standard specifies a method for determining the creep deformation of bonded specimens loaded in bending shear. It is applicable to adhesives used in load-bearing timber structures. It is suitable for the following applications: a) for assessing the compliance of adhesives to prEN 15425 Adhesives, One component polyurethane, for load bearing timber structures - Classification and performance requirements; b) for assessing the suitability and quality of adhesives for load-bearing timber structures. This test is intended primarily to obtain performance data for the classification of adhesives for load bearing timber structures according to their suitability for use in defined climatic environments. This method is not intended to provide numerical design data and does not necessarily represent the performance of the bonded member in service. It is not applicable for assessing the suitability of adhesives for the manufacture of wood- based panels

Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear; German version EN 15416-3:2007