G39 胶粘剂 标准查询与下载

BS ISO 17087:2006 非结构木产品的指形接合用粘合剂规范

This International Standard specifies performance levels for adhesives to be used in finger joints in nonstructural bonded lumbe products. Such products include, but are not limited to, interior and exterior mouldings, window and door components or parts, and bonded lumber panels. Adhesives that meet the requirements of the various performance classes are considered capable of providing an adequate bond for use under the conditions described for the class. This specification is intended to be used to evaluate adhesives as well as the adhesive bonds in the finger joints.

Specifications for adhesives used for finger joints in non-structural lumber products

DIN EN 14680:2006 非压力热塑管道系统用粘合剂.规范

This European Standard specifies the requirements and test methods for adhesives used for joining the components of unplasticised poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and styrene copolymer blends (PVC+SAN) thermoplastic piping systems for fluids under zero pressure(e.g. soil and waste discharge), independent of the application area. It provides reference for the evaluation of conformity of the adhesive to this EN.

Adhesives for non-pressure thermoplastic piping systems - Specifications; English version of DIN EN 14680:2006-12

BS EN 14680:2006 非压力热塑管道系统用粘合剂.规范

This European Standard specifies the requirements and test methods for adhesives used for joining the components of unplasticised poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride)(PVC-C), acrylonitrile -butadiene-styrene (ABS) and styrene copolymer blends (PVC+SAN) thermoplastic piping systems for fluids under zero pressure (e.g. soil and waste discharge), independent of the application area. It provides reference for the evaluation of conformity of the adhesive to this EN.

Adhesives for non-pressure thermoplastic piping systems - Specifications

ISO 17087:2006 非结构木材产品的指形接合用粘合剂的规范

This International Standard specifies performance levels for adhesives to be used in finger joints in nonstructural bonded lumbe products. Such products include, but are not limited to, interior and exterior mouldings, window and door components or parts, and bonded lumber panels. Adhesives that meet the requirements of the various performance classes are considered capable of providing an adequate bond for use under the conditions described for the class. This specification is intended to be used to evaluate adhesives as well as the adhesive bonds in the finger joints.

Specifications for adhesives used for finger joints in non-structural lumber products

BS EN 13999-1:2006 胶粘剂.低溶剂或无溶剂胶粘剂使用后排放特性的测量用短期方法.第1部分:通用规程

This European Standard describes a conventional standard method for assessing potential emissions from adhesives after their application. This European Standard applies only to "solvent-free" and "low-solvent" adhesives as they are defined in EN 923. The adhesives shall be applicable at room temperature.

Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure

BS EN 15416-5:2006 苯酚和氨基塑料除外的负荷轴承木结构的粘结剂.试验方法.常规加压时间测定

This document specifies a method of determining the conventional pressing time at three temperatures and three wood moisture contents. This document is intended to determine the conventional pressing time for one component polyurethane adhesives using a defined procedure for obtaining a reliable base for comparison of conventional pressing time between adhesives. The method gives a result that cannot be applied to the safe manufacture of timber structures without taking into account the influence of factors such as timber density/moisture content, factory temperature and relative air humidity.

Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of conventional pressing time

BS EN 14293:2006 粘合剂.粘接到底层地板的镶花地板用粘合剂.试验方法和最低要求

This European Standard specifies test methods for adhesives for bonding parquet and similar wood floorings to a subfloor. It also specifies the minimum requirements for shear strength and tensile strength to be achieved with these adhesives, as well as a method for determining the open time. there are two different test methods and different minimum requirements for determing the shear strength for hard and soft adhesives. This Standard does not refer to the selection and installation of parquet floorings.

Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements

BS EN ISO 13445:2006 胶粘剂.用块状剪切法测定硬质衬底间胶粘剂黏合的剪切强度

ISO 13445:2003 specifies a method for the determination of the shear strength of adhesives used to bond materials with elastic moduli higher than the elastic modulus of the adhesive. The method provides an estimate of the shear strength of an adhesive on various machinable and non-machinable substrate materials.

Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method

BS EN ISO 9311-1:2005 热塑管道系统用胶粘剂.膜层特性的测定

ISO 9311-1:2005 specifies three test procedures suitable for the determination of the spreadability and film properties of solvent-containing adhesives for thermoplastic piping systems. These methods do not produce directly comparable results. One method is applicable to non-thixotropic adhesives and the other two methods are applicable to thixotropic adhesives.

Adhesives for thermoplastics piping systems - Determination of film properties

DIN EN 15062:2006 皮革和鞋靴材料用胶粘剂.溶剂胶和分散胶粘剂.特定条件下试验粘合剂固化性

This European standard specifies the ageing conditions to whose tests pieces (bonds) shall be submitted, taking into account the different external conditions in service#,,#

Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions English version of DIN EN 15062:2006-08

HG/T 3827-2006 通用型双组分丙烯酸酯胶黏剂

本标准规定了通用型双组分丙烯酸酯胶黏剂要求、抽样方法、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于通用型双组分丙烯酸酶酯胶黏剂。 本标准不包括与使用者有关的所有安全问题，因此使用者有责任在使用前建立有关的安全和卫生条款以及确立所规定的使用范围，以满足国家的有关规定（如车间空气中有害物质的浓度等）。

Two-package general purpose acrylic adhesives

NF T76-327*NF EN 15062:2006 皮革和鞋靴材料用胶粘剂.溶剂胶和分散胶粘剂.特定条件下试验粘合剂固化性

Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions.

BS EN 15062:2006 皮革和鞋靴材料用胶粘剂.溶剂胶和分散胶粘剂.特定条件下粘合老化试验

This European Standard describes a number of test methods simulating under specified conditions the normal natural ageing of bonds prepared from footwear materials by use of solvent based and dispersion adhesives. It applies to adhesive bonds as part of normal worn and stored footwear in normal practice.

Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions

JIS S 6040 AMD 1:2006 普通工作用粘接剂(修改件1)

JIS S 6040:1995を，次のように改正する。

Adhesives for general works (Amendment 1)

JIS K 6820 AMD 1:2006 液体密封剂（修改件1）

Fluid sealants (Amendment 1)

ARMY A-A-59109 B VALID NOTICE 1-2006 环氧树脂基粘合剂

A-A-59109B, dated 16 April 2001, has been reviewed and determined to be valid for use in acquisition.

ADHESIVE, EPOXY RESIN BASE

NF T76-152-3/A1:2006 承重木结构件用胶粘剂.试验方法.第3部分:测定由于温度和湿度的周期变化造成木材纤维的酸性腐蚀对横向拉伸强度的影响

Adhesives for load-bearing timber structures - Test methods - Part 3 : determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength.

NF T76-323:2006 纸,纸板,包装和一次性卫生产品的粘合剂.潜在适用于粘接膜的摩擦性能的测定.

Adhesives for paper and board and packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding.

DIN EN 302-3:2006 承重木结构用粘合剂.试验方法.第3部分:通过温度和湿度循环试验测定木纤维酸性腐蚀对横向拉伸强度的影响.德文版本EN 302-3:2004 + A1:2005

This Part of EN 302 specifies a method for determining the effect on bond strength of damage to wood fibres caused by the action of acids from the adhesive during climatic cycling. It is suitable for the following applications: a) assessing the compliance of adhesives with EN 301; b) for assessing the suitability and quality of adhesives for load-bearing timber structures; c) for determing if the adhesive after bonding has a damaging influence on the strength of the wood due to chemical action.

Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength;English version of DIN EN 302-3:2004 + A1:2005

NY/T 1035-2006 天然纤维地毯背衬海绵配合胶乳

本标准规定了天然纤维（如剑麻、水草、黄麻等）地毯背衬海绵配合胶乳的技术要求、试验方法、检验规则及包装、标志、贮存和运输。 本标准适用于用浓缩天然乳胶生产的地毯背衬海绵配合乳胶。

Compounding latex for natural fibre carpet lined sponge