G39 胶粘剂 标准查询与下载

DIN EN 15337:2007 粘合剂.用针-环试件测定厌氧胶粘剂的剪切强度

This European Standard specifies a method for the determination of the shear strength of anaerobic-curing liquid adhesives used for retaining cylindrical assemblies pin-and-collar type, or for locking and sealing threaded fasteners. This test method may also be used for other adhesives. The test is for ranking and quality control of adhesives. The result does not necessarily reflect the performance of the materials in service and the test is not suitable for providing numerical data for design purposes. NOTE Numerical design data may be obtained from tests using the materials and configurations used in the actual structure.

Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:1990, modified); English version of DIN EN 15337:2007-11

DIN EN 1895 Berichtigung 1:2007 包装和一次性卫生制品用纸和纸板胶粘剂.柔性组装的180°"T"型剥离试验.技术勘误DIN EN 1895-2002

Adhesives for paper and board, packaging and disposable sanitary products - 180°-"T" Peel test for a flexible-to-flexible assembly; German version EN 1895:2001, Corrigenda to DIN EN 1895:2002-02; German version EN 1895:2001/AC:2007

DIN EN 1347:2007 面砖用粘合剂.湿润能力的测定

This European Standard describes the test method to be used to determine the wetting capability of ceramic tile adhesives. This standard is applicable to all ceramic tile adhesives for internal or external tile installations on walls and floors. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives may also be used for other types of tiles (natural and agglomerated stones, etc), where these do not adversely affect the stones.

Adhesives for tiles - Determination of wetting capability; German version EN 1347:2007

DIN EN 15190:2007 结构胶粘剂.评估粘合金属结构的长期坚固度用试验方法

1.1 This standard specifies test procedures for determining the long-term durability of an adhesive system subjected to environmental and fatigue loads. The procedures are based upon measurement of the crack growth rate and the resistance to crack propagation through the adhesive layer in double cantilever beam type specimens under an applied mode I opening cycling loading. 1.2 The test specimens consist of rectangular metal substrates bonded together with a pre-starter crack in the bondline. For testing joints consisting of relatively thin sheets of metallic substrates the specimen needs to be structurally reinforced by adding layers of compatible material to the back of each adherend substrate in order to prevent permanent deformation, usually referred to as reinforced double cantilever beam (RDCB) test specimen. 1.3 For brevity, the standard relates to testing RDCB specimens, which are essentially more complex in manufacturing than standard double cantilever beam (DCB) specimens. However, the standard allows also for use of single substrate double cantilever beam specimens when the substrate material is available in sufficient thickness. 1.4 The test method has been proven to be particularly sensitive in finding weaknesses within certain adhesive systems and is recommended as a scientific tool to study adhesion properties. This test method may be used to determine: - The fatigue crack growth rate as a function of the mode I strain energy release rate; - The threshold values for negligible crack growth; - The effects of other environmental factors (temperature and/or humidity cycling); - The mode I (peel or crack opening) failure mode of the adhesive joint (cohesive, interfacial, near-surface ...).

Structural adhesives - Test methods for assessing long term durability of bonded metallic structures; German version EN 15190:2007

DIN EN 12960 Berichtigung 1:2007 纸和纸板、包装和一次性卫生用品用胶粘剂.耐剪切性的测定.技术勘误DIN EN 12960-2001

Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance; German version EN 12960:2001, Corrigenda to DIN EN 12960:2001-06; German version EN 12960:2001/AC:2007

DIN EN 14256:2007 非结构木材用粘合剂.抗静载荷用试验方法和要求

This European Standard specifies a method for determining the ability of a test piece bonded with a thermoplastic adhesive, to support a given load for a specified time without fracture or excessive distortion, and specifies performance requirements for mean survival time. It should be used in conjunction with EN 204 and EN 205, which describe durability classes and corresponding test methods for non-structural wood adhesives based on their ability to withstand various water treatments and relatively rapidly applied loads. The test described in this standard may be used to assess joints made with thin glue line, as defined in EN 205. NOTE The test described in this standard is not a mandatory requirement for the classification of adhesives into the classes D1, D2, D3 and D4 given in EN 204. It is an additional test that can be specified by a purchaser if required.

Adhesives for non-structural wood applications - Test method and requirements for resistance to static load; German version EN 14256:2007

DIN 54457:2007 结构粘合剂.胶粘粘合连接件的试验.Grub peel试验

Structural adhesives - Testing of adhesively bonded joints - Grub peel test

BS EN 14256:2007 非结构用木材粘结剂.耐静荷载的试验方法和要求

This European Standard specifies a method for determining the ability of a test piece bonded with a thermoplastic adhesive, to support a given load for a specified time without fracture or excessive distortion, and specifies performance requirements for mean survival time. It should be used in conjunction with EN 204 and EN 205, which describe durability classes and corresponding test methods for non-structural wood adhesives based on their ability to withstand various water treatments and relatively rapidly applied loads. The test described in this standard may be used to assess joints made with thin glue line, as defined in EN 205. NOTE The test described in this standard is not a mandatory requirement for the classification of adhesives into the classes D1, D2, D3 and D4 given in EN 204. It is an additional test that can be specified by a purchaser if required.

Adhesives for non-structural wood applications - Test method and requirements for resistance to static load

BS EN 15190:2007 结构胶粘剂.评定粘结的金属结构长期耐久性的试验方法

1.1 This standard specifies test procedures for determining the long-term durability of an adhesive system subjected to environmental and fatigue loads. The procedures are based upon measurement of the crack growth rate and the resistance to crack propagation through the adhesive layer in double cantilever beam type specimens under an applied mode I opening cycling loading. 1.2 The test specimens consist of rectangular metal substrates bonded together with a pre-starter crack in the bondline. For testing joints consisting of relatively thin sheets of metallic substrates the specimen needs to be structurally reinforced by adding layers of compatible material to the back of each adherend substrate in order to prevent permanent deformation, usually referred to as reinforced double cantilever beam (RDCB) test specimen. 1.3 For brevity, the standard relates to testing RDCB specimens, which are essentially more complex in manufacturing than standard double cantilever beam (DCB) specimens. However, the standard allows also for use of single substrate double cantilever beam specimens when the substrate material is available in sufficient thickness. 1.4 The test method has been proven to be particularly sensitive in finding weaknesses within certain adhesive systems and is recommended as a scientific tool to study adhesion properties. This test method may be used to determine: - The fatigue crack growth rate as a function of the mode I strain energy release rate; - The threshold values for negligible crack growth; - The effects of other environmental factors (temperature and/or humidity cycling); - The mode I (peel or crack opening) failure mode of the adhesive joint (cohesive, interfacial, near-surface …).

Structural adhesives - Test methods for assessing long term durability of bonded metallic structures

DIN EN 15307:2007 皮革和鞋靴材料用胶粘剂.上鞋底粘附力.最低强度要求

This European Standard defines for four main types of footwear minimum strength requirements for their soleupper bonds produced with solvent-based or dispersion adhesives under specified conditions.

Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements; English version of DIN EN 15307:2007-08

JIS A 5536:2007 弹性地板覆盖物和木制地板材料用粘合剂

この規格は,建築物の床仕上げ材【ビニル系床材(),リノリウム系床材,ゴム系床材，タイルカーペット()などの高分子系張り床材，木質系床材()などの張付けに使用する接着剤(以下，接着剤という。)について規定する。注() JIS A 5705に規定する床タイル又は床シートとする。() JIS L 4406に規定するタイルカーペットとする。()JASフローリングに規定する単層フローリング又は複合フローリングとする。

Adhesives for resilient floorcoverings and woody floorings

HG/T 3948-2007 卫生巾和卫生护垫定位用热熔胶

本标准规定了卫生巾和卫生护垫定位用热熔胶的要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于卫生巾和卫生护垫定位用热熔胶（以下简称热熔胶）。

Hot Melt Adhesives for Sanitary napkin & Panty liner

HG/T 3947-2007 单组份室温硫化有机硅胶黏剂/密封剂

本标准规定了单组分室温硫化有机硅胶黏剂/密封剂的要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以聚硅氧烷、填料、交联剂和催化剂等为主要成分的用于电子电器（气）、机械行业密封用的单组分室温硫化有机硅胶黏剂/密封剂。

One-part RTV silicone adhesives/sealants

NF T76-333:2007 皮革和鞋类材料用粘合剂.网鞋.最低强度要求

Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements.

NF T76-140-2:2007 粘合剂.使用后低溶解或不溶解粘合剂排放性能的测量用短期方法.第2部分:挥发性有机化合物的测定

Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2 : determination of volatile organic compounds.

DIN EN 13999-4:2007 粘合剂.测量使用后低溶解和不溶解粘合剂排放特性的短期方法.第4部分:挥发性二异氰酸盐的测定

This European standard specifies a procedure for the determination of volatile isocyanates in the exhaust air of an emission test chamber after application of a low-solvent or solvent-free adhesive as defined in EN 923. The method is based on chemosorption of volatile isocyanates with 1-(2-methoxyphenyl)piperazine(in the following:1-2MP)impregnated filters with subsequent desorption and liquid chromatographic analysis.The method permits measurement of a wide range of organic compounds containing isocyanate functional groups(NCO),including isocyanate monomers.For testing of adhesives emissions mainly toluene diisocyanate(TDI)and methylene bis(4-phenyl isocyanate also knownas 4,4-diisocyanato-diphenylmethane or MDI),are of concern. The method as described in this European standard can be used for other isocyanates too,such as isophorone diisocyanate(IPDI)and 1,6-hexamethylene diisocyanate(HDI)-see ISO 16072.Isocyanate oligomers or prepolymers are not volatile enough to be detected in emission test chambers at room temperature.

Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates; German version EN 13999-4:2007

DIN EN 13999-2:2007 粘合剂.使用后低溶剂或无溶剂粘合剂排放特性的测量用短期方法.第2部分:挥发性有机化合物的测定

This European Standard specifies a method for the determination of single volatile organic compounds (VOC)and of the total amount of volatile organic compounds (TVOC EN 13999) in the exhaust air of an emission test chamber after application of a low-solvent-free adhesive as defined in EN 923. The method is based on use of a solid sorbent with subsequent desorption and gas chromatographic analysis. The method is applicable to measurement of non-polar and slightly polar VOC.

Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds; German version EN 13999-2:2007

DIN EN 13999-3:2007 粘合剂.测量使用后低溶解和不溶解粘合剂排放特性的短期方法.第3部分:挥发性乙醛的测定

This European standard specifies a proceduce for the determination of value of volatile aldehydes (especially formaldehyde and acetaldehyde)and other carbonyl compounds in the exhaust air of an emission test chamber after application of a low-solvent or solvent-free adhesive as defined in EN 923. The method is based on chemosorption of volatile carbonyl compounds with 2,4-dinitrophenylhydrazine(in the following:DNPH)impregnated silica tubes or cartridges with subsequent solvent desorption,clean-up and liquid chromatographic analysis.The method permits measurement of several aldehydes including formaldehyde,acetaldehyde,propionaldehyde, butyraldehyde,valeraldehyde,isovaleraldehyde,hexanal,benzaldehyde,2,5-dimethylbenzaldehyde,o-tolualdehyde,m-tolualdehyde,p-tolualdehyde,crotonaldehyde in the concentration range of approximately 10μm/mto 1mg/m(see ISO 16000-3).

Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes; German version EN 13999-3:2007

BS EN 15307:2007 皮革和鞋靴材料用胶粘剂.上鞋底粘附力.最低强度要求

This European Standard defines for four main types of footwear minimum strength requirements for their soleupper bonds produced with solvent-based or dispersion adhesives under specified conditions.

Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements

NF T76-326:2007 压力下流体用热塑性管道系统的粘合剂.规范

Adhesives for thermoplastic piping systems for fluids under pressure - Specifications.