H43 钢锭、钢坯 标准查询与下载
共找到 188 条与 钢锭、钢坯 相关的标准，共 13 页
1.1 This specification2 covers a group of common requirements that, unless otherwise specified in the individual product specification, shall apply to steel forgings under any of the following specifications issued by ASTM: ASTM Designation Title A266/A266M Carbon Steel Forgings for Pressure Vessel Components A288 Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators A289/A289M Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators A290/A290M Carbon and Alloy Steel Forgings for Rings for Reduction Gears A291/A291M Steel Forgings, Carbon and Alloy, for Pinions, Gears, and Shafts for Reduction Gears A336/A336M Alloy Steel Forgings for Pressure and High-Temperature Parts A372/A372M Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels A427/A427M Wrought Alloy Steel Rolls for Cold and Hot Reduction A469/A469M Vacuum-Treated Steel Forgings for Generator Rotors A470/A470M Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts A471/A471M Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels A504/A504M Wrought Carbon Steel Wheels A508/A508M Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessel......
Standard Specification for Steel Forgings, General Requirements
- ICS
- 77.140.85 (Iron and steel forgings)
- CCS
- H43
- 发布
- 2014
- 实施
本标准规定了离心铸造管坯的订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则和包装、标志及质量证明书等。本标准适用于热(冷)加工制造无缝钢管的单金属和双金属离心铸造管坯(以下简称“管坯”)。当管坯作为成品管应用时,也可参考本标准。
Centrifugal casting pipe billet
- ICS
- 77.140.60
- CCS
- H43
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了静态浇注空心管坯的订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志及质量证明书。本标准适用于制造高压锅炉、化肥设备、石油炼油、石油化工、煤化工、电力装置等用途无缝钢管的静态浇注空心管坯(以下称管坯)。
Static casting hollow billet
- ICS
- 77.140.60
- CCS
- H43
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了高速、重载列车车轴用钢坯的外形、尺寸、重量及允许偏差、技术要求、试验方法及检验规则、标志和质量证明书。本标准适用于制造高速、重载列车车轴用钢坯。
Steel billet for high speed and heavy load train axles
- ICS
- 77.140.70
- CCS
- H43
- 发布
- 2013-04-25
- 实施
- 2013-09-01
1.1 This specification2 covers a group of common requirements that, unless otherwise specified in the individual product specification, shall apply to steel forgings under any of the following specifications issued by ASTM: ASTM Designation Title A266/A266M Carbon Steel Forgings for Pressure Vessel Components A288 Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators A289/A289M Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators A290/A290M Carbon and Alloy Steel Forgings for Rings for Reduction Gears A291/A291M Steel Forgings, Carbon and Alloy, for Pinions, Gears, and Shafts for Reduction Gears A336/A336M Alloy Steel Forgings for Pressure and High-Temperature Parts A372/A372M Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels A427/A427M Wrought Alloy Steel Rolls for Cold and Hot Reduction A469/A469M Vacuum-Treated Steel Forgings for Generator Rotors A470/A470M Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts A471/A471M Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels A504/A504M Wrought Carbon Steel Wheels A508/A508M Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessel......
Standard Specification for Steel Forgings, General Requirements
- ICS
- 77.140.85 (Iron and steel forgings)
- CCS
- H43
- 发布
- 2013
- 实施
本部分规定了压水堆核电厂反应堆冷却剂泵轴用含铌稳定化奥氏体不锈钢锻件的制造、试验、检验和验收等要求。本部分适用于制造压水堆核电厂反应堆冷却剂泵轴用含铌稳定化奥氏体不锈钢锻件06Cr18Ni11Nb。
Stainless steel for pressurized water reactor nuclear power plants.Part 4: Niobium stabilized austenitic stainless steel forgings for the shafts of reactor coolant pumps
- ICS
- 77.140.85
- CCS
- H43
- 发布
- 2012-10-19
- 实施
- 2013-03-01
本部分规定了压水堆核电厂反应堆冷却剂管道用控氮奥氏体不锈钢锻造管和弯管的制造、试验、检测和验收等要求。本部分适用于压水堆核电厂反应堆冷却剂管道用控氮奥氏体不锈钢026Cr19Ni10N和026Cr18Ni12Mo2N锻造管和弯管,包括带或不带一体化接管嘴的锻造或轧制(挤压)直管;带或不带一体化接管嘴的弯管。
Stainless steel for pressurized water reactor nuclear power plants.Part 13: Forged tubes and elbows made from controlled nitrogen austenitic stainless steel for reactor coolant piping
- ICS
- 77.140.85
- CCS
- H43
- 发布
- 2012-10-19
- 实施
- 2013-03-01
本部分规定了压水堆核电厂用镍-铬-铁合金热挤管的制造、化学成分、试验、检验和验收等技术要求。本部分适用于压水堆核电厂用镍-铬-铁合金(NS3105)热挤管。
Other materials for pressurized water reactor nuclear power plants.Part 8:Hot extruded nickel-chromium-iron alloy pipes
- ICS
- 77.120.40
- CCS
- H43
- 发布
- 2012-10-19
- 实施
- 2013-03-01
本部分规定了压水堆核电厂蒸汽发生器上封头用锰-镍-钼合金钢锻件的制造、试验、检验和验收等要求。本部分适用于压水堆核电厂蒸汽发生器上封头用锰-镍-钼(18MnNiMo)合金钢锻件。
Alloy steel for pressurized water reactor nuclear power plants.Part 8:Mn-Ni-Mo steel forgings for steam generator upper heads
- ICS
- 77.140.85
- CCS
- H43
- 发布
- 2012-10-19
- 实施
- 2013-03-01
本部分规定了压水堆核电厂反应堆冷却剂泵电动机轴系驱动轴、中间轴和电动机联轴器用锰-镍-铬-钼钢锻件的制造、试验、检验和验收等要求。粗加工状态的驱动轴是中部截面直径为700mm左右的实心圆柱体,其他锻件为壁厚50mm~100mm带法兰的中空圆柱体。本部分适用于压水堆核电厂反应堆冷却剂泵电动机轴系驱动轴、中间轴和电动机联轴器用锰-镍-铬-钼钢锻件。
Alloy steel for pressurized water reactor nuclear power plants.Part 13: Alloy steel forgings for reactor coolant pump motor shaft assembles
- ICS
- 77.140.85
- CCS
- H43
- 发布
- 2012-10-19
- 实施
- 2013-03-01
本部分规定了压水堆核电厂蒸汽发生器传热管支承用马氏体不锈钢板的制造、化学成分、试验、检验和验收要求。本部分适用于压水堆核电厂蒸汽发生器传热管支承用厚度为15 mm~40 mm的06Cr13马氏体不锈钢板。
Stainless steel for pressurized water reactor nuclear power plants.Part 21: Martensitic stainless steel plates for use in making steam generator tube support plates
- ICS
- 77.140.20
- CCS
- H43
- 发布
- 2012-10-19
- 实施
- 2013-03-01
本部分规定了压水堆核电厂蒸汽发生器筒体用锰-镍-钼合金钢锻件的制造、试验、检验和验收等要求。本部分适用于压水堆核电厂蒸汽发生器筒体用锰-镍-钼(18MnNiMo)合金钢钢锻件。
Alloy steel for pressurized water reactor nuclear power plants.Part 7:Mn-Ni-Mo steel forgings for steam generators shells
- ICS
- 77.140.85
- CCS
- H43
- 发布
- 2012-10-19
- 实施
- 2013-03-01
本部分规定了压水堆核电厂反应堆压力容器封头用锰-镍-钼合金钢锻件的制造、试验、检测和验收等技术要求。本部分适用于压水堆核电厂反应堆压力容器封头用锰-镍-钼(16MnNiMo)合金钢锻件。
Alloy steel for pressurized water reactor nuclear power plants.Part 5:Mn-Ni-Mo alloy steel forgings for reactor pressure vessel heads
- ICS
- 77.140.85
- CCS
- H43
- 发布
- 2012-10-19
- 实施
- 2013-03-01
本部分规定了压水堆核电厂堆芯支承件和上支承板用控氧奥氏体不锈钢锻件的制造、试验、检验和验收等技术要求。 本部分适用于压水堆核电厂堆芯支承件和上支承板用022Cr19Ni10N控氧奥氏体不锈钢锻件。
Stainless steel for pressurized water reactor nuclear power plants.Part 3:Controlled nitrogen content austenitic stainless steel forgings for core upports and upper support plates
- ICS
- 77.140.85
- CCS
- H43
- 发布
- 2012-01-06
- 实施
- 2012-04-06
本部分规定了压水堆核电厂2、3级热交换器管板用奥氏体不锈钢锻件的制造、试验、检验和验收等技术要求。 本部分适用于压水堆核电厂辅助系统的热交换器管板用厚度30mm～250mm牌号022Cr19Ni10、022Cr17Ni12Mo2的奥氏体不锈钢锻件。
Stainless steel for pressurized water reactor of nuclear power plants.Part 2: Austenitic stainless steel forgings for class 2 and 3 tube plates of heat exchanger
- ICS
- 77.140.85
- CCS
- H43
- 发布
- 2012-01-06
- 实施
- 2012-04-06
本部分规定了压水堆核电厂2、3级辅助泵轴用20、16Mn碳钢和低合金钢锻件的制造、化学成分、力学性能、试验方法、检验规则等技术要求。 本部分适用于压水堆核电厂2、3级辅助泵轴用20、16Mn碳钢和低合金钢锻件。
Carbon steel and low alloy steel for pressurized water reactor nuclear power plants.Part 3:Forgings for class 2,3 auxiliary pump shafts
- ICS
- 77.140.85
- CCS
- H43
- 发布
- 2012-01-06
- 实施
- 2012-04-06
本部分规定了压水堆核电厂2、3级马氏体不锈钢锻件的制造、试验、检验和验收等技术要求。 本部分适用于压水堆核电厂2、3级设备用04Cr13Ni4Mo、05Cr16Ni5Mo马氏体不锈钢锻件。
Stainless steel for pressurized water reactor nuclear power plants.Part 16：Class 2 and 3 martensitic stainless steel forgings
- ICS
- 77.140.85
- CCS
- H43
- 发布
- 2012-01-06
- 实施
- 2012-04-06
本部分规定了压水堆核电厂堆内构件压紧弹性环用马氏体不锈钢锻件的制造、试验、检验和验收等技术要求。 本部分适用于压水堆核电厂堆内构件压紧弹性环用12Cr13NiMo马氏体不锈钢锻件。
Stainless steel for pressurized water reactor nuclear power plants.Part 17：Martensitic stainless steel forgings used for internal hold down springs
- ICS
- 77.140.85
- CCS
- H43
- 发布
- 2012-01-06
- 实施
- 2012-04-06
本标准规定了凿岩用DT58、HT60异形螺纹球齿钎头的订货内容、代号、类型、型号、外形、螺纹、尺寸及允许偏差、技术要求、试验方法、检验规则、包装、标志及质量证明书。 本标准适用于凿岩用直径为89mm～152mm的DT58和HT60异形螺纹硬质合金球齿钎头。
Button bits with special threads
- ICS
- 77.140.60
- CCS
- H43
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了钢筋混凝土用高延性冷轧带肋钢筋的术语、定义、分类、牌号、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书。 本标准适用于钢筋混凝土和预应力混凝土用较高延性冷轧带肋钢筋，也适用于制造焊接网用较高延性冷轧带肋钢筋（以下简称钢筋）。
Cold rolled ribbed bars with improved elongation
- ICS
- 77.140.60
- CCS
- H43
- 发布
- 2011-12-20
- 实施
- 2012-07-01
