J74 压力容器 标准查询与下载

DIN EN ISO 18119:2021 气瓶. 无缝钢和无缝铝合金气瓶和管. 定期检查和试验(ISO 18119-2018+Amd.1-2021); 德文版本EN ISO 18119-2018+A1-2021

This document specifies the requirements for periodic inspection and testing to verify the integrity of cylinders and tubes to be re-introduced into service for a further period of time.

Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing (ISO 18119:2018 + Amd.1:2021); German version EN ISO 18119:2018 + A1:2021

DIN EN ISO 14245:2021 气瓶. 液化石油气瓶阀门的规范和试验. 自闭合(ISO 14245-2021); 德文版本EN ISO 14245-2021

This Standard specifies the requirements for design, specification and type testing for dedicated LPG self-closing cylinder valves specifically for use with transportable refillable LPG cylinders from 0,5 l up to 150 l water capacity. It includes references to associated equipmen

Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2021); German version EN ISO 14245:2021

NF M88-730*NF EN ISO 15995:2021 气瓶. 液化石油气(LPG)汽缸阀的规格和测试. 手动操作

Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated

ISO 14245:2021 气瓶. 液化石油气(LPG)气瓶阀门规范和试验. 自动关闭

This document specifies the requirements for design, specification, type testing and production testing and inspection for dedicated LPG self-closing cylinder valves for use with and directly connected to transportable refillable LPG cylinders. It also includes requirements for associated equipment for vapour and liquid service. Bursting discs and/or fusible plugs are not covered in this document. Annex A identifies requirements for production testing and inspection. This document excludes other LPG cylinder devices which are not an integral part of the dedicated selfclosing cylinder valve. This document does not apply to cylinder valves for fixed automotive installations and ball valves. NOTE For manually operated LPG cylinder valves see ISO 15995. For cylinder valves for compressed, dissolved and other liquefied gases see ISO 10297, ISO 17871 or ISO 17879.

Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing

ISO 15245-1:2021 气瓶. 阀与气瓶连接的平行螺纹. 第1部分: 规范

This document specifies definitions, dimensions and tolerances of parallel screw threads of M30 x 2, M25 x 2 and M18 x 1,5, for the connection of valves to medical and industrial gas cylinders. This document does not contain the connection requirements for: — mechanical strength; — gas tightness; — capability of repeated assembly and dismounting operations (this aspect is covered in ISO 13341).

Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification

DIN 477:2021 用于压力高达300 bar的气瓶试验的气瓶阀门. 阀门进口和出口连接

This standard applies to cylinder valves according to DIN EN ISO 10297 for compressed, liquefied and dissolved gases and specifies the requirements for inlet and outlet connections of cylinder valves rated for cylinder test pressures up to and including 300 bar, if not otherwise

Gas cylinder valves for cylinder test pressures up to 300 bar - Valve inlet and outlet connections

DB43/T 1975-2021 站用钢质无缝储气瓶组定期检验规则

Rules for periodic inspection of steel seamless gas storage cylinders for station use

NF A82-150:2021 机械化多点焊接用压缩气瓶

Pneumatic cylinders for mechanized multiple spot welding

BS ISO 11119-3:2020 气瓶. 可二次填充的混合气瓶和导管的设计,安装和测试. 第3部分: 容量不高于450 L带非负载分配金属或非金属衬层或无衬层的完全包装纤维增强复合材料气瓶和管道

Gas cylinders. Design, construction and testing of refillable composite gas cylinders and tubes. Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners or without liners

ASTM C1847-21 直埋预绝缘和夹套聚氨酯粘结低温热水管道系统的标准规范

1.1?This specification covers direct buried underground pre-insulated, hot water piping systems with an upper temperature limit of 250 ��F (121 ��C) used to convey pressurized fluids for district heating. In the pre-insulated pipe industry and in this standard, this temperature

Standard Specification for Direct Buried Pre-Insulated and Jacketed Polyurethane Bonded Low Temperature Hot Water Piping Systems

BS EN 12493:2020 LPG设备和附件. LPG公路气罐车用焊钢压力容器. 设计和制造

LPG equipment and accessories. Welded steel pressure vessels for LPG road tankers. Design and manufacture

JIS G 3118:2020 中温和常温设备压力容器用碳素钢板

Carbon steel plates for pressure vessels for intermediate and moderate temperature services

NF M88-716*NF EN 12493:2020 液化石油气设备和附件. 液化石油气道路罐车的钢制焊接压力容器. 设计和制造

Le présent document spécifie les exigences minimales relatives aux matériaux, à la conception, à la construction et aux procédures de fabrication, ainsi que les essais des réservoirs sous pression soudés de camions-citernes utilisés pour le transport du GPL et de leurs accessoire

LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture

BS ISO 11119-2:2020 气瓶. 可二次填充的混合气瓶和导管的设计,安装和测试. 第2部分: 容量大于450 L带有负载分配金属衬壳的完全包裹纤维增强复合材料气瓶和导管

Gas cylinders. Design, construction and testing of refillable composite gas cylinders and tubes. Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners

BS ISO 11119-1:2020 气瓶. 可可二次填充的混合气瓶和导管的设计,安装和测试. 第1部分: 小于等于450 L的箍围纤维增强复合气体储气瓶和管

Gas cylinders. Design, construction and testing of refillable composite gas cylinders and tubes. Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l

DB31/T 1258-2020 气瓶管理信息报文格式规范

Format specification of gas cylinder management information message

BS PD CEN/TR 14473:2020 移动式气瓶. 乙炔气瓶的多孔材料

Transportable gas cylinders. Porous materials for acetylene cylinders

ISO 11119-3:2020 气瓶. 可二次填充的混合气瓶和导管的设计,安装和测试. 第3部分: 容量不高于450 L带非负载分配金属或非金属衬层或无衬层的完全包装纤维增强复合材料气瓶和管道

This document specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at time of manufacture for: — type 4 composite fully wrapped cylinders or tubes with a non-load sharing liner and composite reinforcement on both the cylindrical portion and the dome ends; — type 5 fully wrapped cylinders or tubes without liners and with a test pressure of less than 60 bar and composite reinforcement on both the cylindrical portion and the dome ends; — water capacities up to 450 l; — for the storage and conveyance of compressed or liquefied gases; — cylinders and tubes with composite reinforcement of carbon fibre, aramid fibre or glass fibre (or a mixture thereof) within a matrix; — a minimum design life of 15 years. Cylinders and tubes manufactured and tested according to this document are not intended to contain toxic, oxidizing or corrosive gases. This document does not address the design, fitting and performance of removable protective sleeves. NOTE 1 References to cylinders in this document include composite tubes if appropriate. NOTE 2

Gas cylinders - Design, construction and testing of refillable composite gas cylinders and tubes - Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners or without liners

ISO 11119-1:2020 气瓶. 可可二次填充的混合气瓶和导管的设计,安装和测试. 第1部分: 小于等于450 L的箍围纤维增强复合气体储气瓶和管

This document specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at time of manufacture for: — type 2 composite hoop wrapped cylinders or tubes with a load-sharing metal liner and composite reinforcement on the cylindrical portion only; — water capacities up to 450 l; — the storage and conveyance of compressed or liquefied gases; — cylinders and tubes with composite reinforcement of carbon fibre, aramid fibre or glass fibre (or a mixture thereof) within a matrix or steel wire to provide circumferential reinforcement; — a minimum design life of 15 years. This document does not address the design, fitting, and performance of removable protective sleeves. NOTE 1 References to cylinders in this document include composite tubes if appropriate. NOTE 2

Gas cylinders - Design, construction and testing of refillable composite gas cylinders and tubes - Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l

ISO 11119-2:2020 气瓶. 可二次填充的混合气瓶和导管的设计,安装和测试. 第2部分: 容量大于450 L带有负载分配金属衬壳的完全包裹纤维增强复合材料气瓶和导管

This document specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at time of manufacture for: — type 3 fully wrapped cylinders or tubes with a load-sharing metal liner and composite reinforcement on both the cylindrical portion and the dome ends; — water capacities up to 450 l; — storage and conveyance of compressed or liquefied gases; — cylinders and tubes with composite reinforcement of carbon fibre, aramid fibre or glass fibre (or a mixture thereof) within a matrix; — a minimum design life of 15 years. This document does not address the design, fitting, and performance of removable protective sleeves. This document does not apply to cylinders with welded liners. NOTE 1 References to cylinders in this document include composite tubes if appropriate. NOTE 2

Gas cylinders - Design, construction and testing of refillable composite gas cylinders and tubes - Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners