J74 压力容器 标准查询与下载
共找到 1987 条与 压力容器 相关的标准，共 133 页
Gas cylinders - Welded aluminium-alloy, carbon and stainless steel gas cylinders - Periodic inspection and testing
- ICS
- 23.020.35
- CCS
- J74
- 发布
- 2018-09
- 实施
本标准规定了水晶釜涡流检测的人员 、 设备的一般要求 、 检测实施程序 、 缺陷评级和检测结果处理 方法 、 形成的检测记录报告的内容要求 。 本标准适用于采用放置式 、 双向探头对公称内径不小于 250mm 、 筒体直段无焊接接头的水晶釜内壁 表面母材进行自动机械旋 转扫查涡流检测 。
Eddy current inspection rules for in-service artificial crystal kettles
- ICS
- 23.020.30
- CCS
- J74
- 发布
- 2018-08-27
- 实施
- 2018-09-27
Gas cylinders. Stamp marking
- ICS
- 23.020.35
- CCS
- J74
- 发布
- 2018-08-15
- 实施
- 2018-08-15
Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction
- ICS
- 13.300;23.020.20
- CCS
- J74
- 发布
- 2018-08-07
- 实施
- 2018-08-07
The primary objective of the periodic inspection of transportable refillable liquefied petroleum gas (LPG) cylinders is that, on the completion of the tests, the cylinders may be re-introduced into service for a further period of time. This European Standard specifies procedures for periodic inspection and testing, for transportable refillable LPG cylinders with a water capacity from 0,5 l up to and including 150 l. It is applicable to the following: - welded steel LPG cylinders manufactured to an alternative design and construction, see EN 14140 or equivalent standard; - welded aluminium LPG cylinders, see EN 13110 or equivalent standard; - composite LPG cylinders, see EN 14427 or equivalent standard; - over-moulded cylinders designed and manufactured according to EN 1442 or EN 14140, see Annex F. This European Standard does not apply to cylinders permanently installed in vehicles.
LPG equipment and accessories - Transportable refillable LPG cylinders other than traditional welded and brazed steel cylinders - Periodic inspection; German version EN 16728:2016+A1:2018
- ICS
- 23.020.35
- CCS
- J74
- 发布
- 2018-08-01
- 实施
This document (EN 13445-2:2014/A2:2018) includes the text of the amendment of EN 13445-2:2014. This Amendment relates to the scope, normative references and clauses 4.2.1.2 "lamellar tearing", 4.3.3 "particular material appraisals", B.2.3.1 "method 2 - general" and E.2 "european steels for pressure purposes".
Unfired pressure vessels - Part 2: Materials; German version EN 13445-2:2014/A2:2018
- ICS
- 23.020.30
- CCS
- J74
- 发布
- 2018-07-00
- 实施
This document specifies stamp marking of transportable gas cylinders of volumes greater than 0,12 l and up to or equal to 150 l and tubes of volumes up to or equal to 3000 l, including: — steel and aluminium-alloy gas cylinders; — acetylene cylinders; — liquefied petroleum gas (LPG) cylinders (see Annex A); and — small cylinders (see Annex B). Unless noted by exception, the use of “cylinder” in this document refers to the above types of cylinders. Non-refillable cylinders are addressed by this standard.
Gas cylinders - Stamp marking
- ICS
- 23.020.35
- CCS
- J74
- 发布
- 2018-07-00
- 实施
Technical Specifications for Traceability of Gas Cylinders for Hazardous Chemicals
- ICS
- 23.020.30
- CCS
- J74
- 发布
- 2018-06-14
- 实施
- 2019-01-01
Specification for low-frequency electromagnetic detection of atmospheric pressure metal storage tank bottom plate
- ICS
- 23.020.30
- CCS
- J74
- 发布
- 2018-05-08
- 实施
- 2018-06-10
This document specifies dimensions and tolerances for taper screw threads of nominal diameter 17,4 mm (designated 17E) and 25,8 mm (designated 25E) used for the connection of valves to gas cylinders. This document does not cover the connection requirements for: - mechanical strength; - gas tightness; - capability of repeated assembly and dismounting operations. Gauge inspection is covered by ISO 11363-2.
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018); German version EN ISO 11363-1:2018
- ICS
- 21.040.30;23.020.35
- CCS
- J74
- 发布
- 2018-05-01
- 实施
Vessel supports part 2: leg supports
- ICS
- 23.02
- CCS
- J74
- 发布
- 2018-04-03
- 实施
- 2018-07-01
Vessel supports part 3: ear supports
- ICS
- 23.02
- CCS
- J74
- 发布
- 2018-04-03
- 实施
- 2018-07-01
Vessel supports Part 5: Rigid ring supports
- ICS
- 23.02
- CCS
- J74
- 发布
- 2018-04-03
- 实施
- 2018-07-01
Vessel supports part 1: saddle supports
- ICS
- 23.02
- CCS
- J74
- 发布
- 2018-04-03
- 实施
- 2018-07-01
Vessel supports Part 4: Supported supports
- ICS
- 23.02
- CCS
- J74
- 发布
- 2018-04-03
- 实施
- 2018-07-01
Periodic Inspection and Evaluation of Welded Insulated Gas Cylinders
- ICS
- 23.020.30
- CCS
- J74
- 发布
- 2018-04-02
- 实施
- 2018-07-01
本规范规定了充装使用的液化石油气钢瓶标识涂敷的总体要求、基本要求、安全警示标签、产品合格标签、保险标识、电子标签、委托涂敷要求等。 本规范适用于广东省行政区域内充装使用的液化石油气钢瓶。
Technical specifications for marking and coating of liquefied petroleum gas cylinders
- ICS
- 23.020.30
- CCS
- J74
- 发布
- 2018-01-02
- 实施
- 2018-04-02
This International Standard specifies the requirements for periodic inspection and testing and to verify the integrity for further service of hoop-wrapped and fully-wrapped composite transportable gas cylinders, with aluminium-alloy, steel or non-metallic liners or of linerless construction (Types 2, 3, 4, and 5), intended for compressed, liquefied or dissolved gases under pressure, of water capacity from 0,5 l up to 450 l. This International Standard is written to address the periodic inspection and testing of composite cylinders constructed to ISO 11119-1, ISO 11119-2, and ISO 11119-3 standards and can be applied to other composite cylinders designed to comparable standards when authorized by the competent authority. As far as practicable, this International Standard also can be applied to cylinders of less than 0,5 l water capacity.
Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015, Corrected version 2017-02); German version EN ISO 11623:2015
- ICS
- 23.020.35
- CCS
- J74
- 发布
- 2018-01-01
- 实施
Liquid dangerous goods tank container
- ICS
- 23.02
- CCS
- J74
- 发布
- 2017-12-27
- 实施
- 2018-06-01
Detailed Rules for Special Equipment Safety Risk Hierarchical Management and Control System
- ICS
- 23.020.10
- CCS
- J74
- 发布
- 2017-12-20
- 实施
- 2018-01-20
