J96 冷却系统与加热装置 标准查询与下载

JB/T 8126.1-2010 内燃机.冷却水泵.第1部分:总成.技术条件

JB/T 8126的本部分规定了内燃机冷却水泵总成的术语和定义、要求、试验方法、检验规则、标志、包装、运输、贮存等。 本部分适用于中小功率内燃机无自吸式要求的离心式冷却水泵总成。

Internal combustion engines.Cooling water pumps.Part 1:Assemblies.Specification

JB/T 8126.6-2010 内燃机.冷却水泵 第6部分:V带轮 技术条件

GB/T 8126的本部分规定了内燃机冷却水泵V带传动用带轮的术语和定义、型号分类、技术要求、检验方法、检验规则及标志、包装、运输和贮存。 本部分适用于中小功率内燃机冷却水泵V带轮(以下简称带轮)。

Internal combustion engines-Cooling water pumps-Part 6:Grooved pulleys for V-belts-Specification

ASME PTC 12.2-2010 表面蒸汽冷凝器

This Code provides standard directions and rules for conducting and reporting performance tests of watercooled, steam surface condensers, hereafter referred to as condensers. This Code provides explicit test procedures for performing a reasonably accurate, pragmatic level of performance testing. If higher levels of accuracy are desired, the alternative test, described in Nonmandatory Appendix A, can be performed in lieu of the test. Acceptance testing is used to determine compliance with contractual obligations and can be incorporated into commercial agreements. The test shall be considered an ASME Code test only if the test procedures comply with this Code. The rules and instructions included in this Code are for the condenser. The test does not assess the performance of any of the auxiliary apparatus associated with the condenser. For any related equipment components, refer to other ASME Performance Test Codes.

Steam Surface Condensers

KS B 6405-2009 供暖散热器配件

이 표준은 증기 또는 온수를 사용하는 난방용 방열기의 밸브, 유니언 엘보 및 리턴 콕(이하

Valves and fitting for radiator

KS B 6858-2009 螺旋式冷冻剂压缩机

이 표준은 정격 냉동 능력 60 000 kcal/h 이하의 밀폐형 냉매 압축기로서, R-2

Hermetic scroll compressor

ASTM D1287-09 发动机冷却剂和防锈剂的pH值的标准试验方法

pH is a measure of the hydrogen ion concentration and indicates whether an engine coolant, antirust, or a solution of these compounds is acidic, alkaline, or neutral. The pH range includes values from 0 to 14. Values from 0 to 7 represent the acidic half of the scale. Values from 7 to 14 represent the alkaline or basic half of the scale. The pH value 7 is considered neutral, as it is neither acidic nor alkaline. pH is sometimes used for production quality control. It is generally desirable that engine coolants have an alkaline pH. pH is not significant from the standpoint of predicting service life. The pH of used engine coolants or antirust solutions is not a dependable indication of either existing effectiveness or remaining life of the solution.1.1 This test method covers the determination of the pH of unused engine coolants and antirusts, and used or unused aqueous dilutions of the concentrated products. Note 18212;Antirusts in solid form are not included in this test method. Note 28212;It is believed that this procedure gives all the information required for determining the pH of samples of engine coolant or antirust likely to be encountered. Should additional information on pH determinations be needed, reference should be made to Test Method E70. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for pH of Engine Coolants and Antirusts

KS B 6411-2008 圆筒形、管形及箱子形门锁

이 표준은 건축물 개입부의 출입문에 사용되는 원통형(cylindrical), 튜블러형(tu

Clindrical tubular and mortise door locks

JIS S 2071:2008 家用气和燃油加热器的标准使用条件、标准加速模式和试验条件

この規格は，ガス又は石油を燃料とする，室内に設置する家庭用ガス温水機器・石油温水機器(以下，給湯機器という。)の設計標準使用期間を定めるときに用いる標準使用条件及び標準加速モード並びにその試験条件について規定する。

Standard use conditions, standard acceleration mode and test conditions for domestic gas and oil water heater

JB/T 6723.4-2008 内燃机.冷却风扇.第4部分:冷凝式内燃机冷却风扇 试验方法

JB/T 6723的本部分规定了冷凝式内燃机冷却风扇的试验项目、方法、内容、数据计算、结果分析以及文件整理的要求。 本部分适用于冷凝式内燃机带发电机及不带发电机的两种冷却风扇（以下总称风扇）。

Cooling fan for internal combustion engines.Part4:Test method for cooling fan of condensing engines

JB/T 6723.3-2008 内燃机冷却风扇.第3部分:冷凝式内燃机冷却风扇技术条件

JB/T 6723的本部分规定了冷凝式内燃机冷却风扇的分类、命名、技术要求、检验规则以及标志。 本部分适用于冷凝式内燃机带发电机及不带发电机的两种冷却风扇（以下总称风扇）。

Cooling fan for internal combustion engines.Part3:Specification for cooling fan of condensing engines

JB/T 6723.2-2008 内燃机冷却风扇.第2部分:塑料冷却风扇.技术条件

JB/T 6723的本部分规定了内燃机塑料冷却风扇产品分类、代号、产品型号规格标记方法、技术要求、检验方法、检验规则、标志、包装、运输及贮存。 本部分适用于外径不大于1000mm的水冷式、风冷式内燃机(汽油机、柴油机)冷却系统用塑料冷却风扇(以下简称风扇)。

Cooling fan for internal combustion engines.Part 2:Technical requirements of plastic fan

JB/T 6723.1-2008 内燃机冷却风扇.第1部分:金属冷却风扇.技术条件

JB/T 6723的本部分规定了内燃机金属冷却风扇产品分类、代号、产品型号规格标记方法、技术要求、检验方法、检验规则、标志、包装、运输及贮存。 本部分适用于外径不大于750mm的水冷式、风冷式内燃机(汽油机、柴油机)冷却系统用金属冷却风扇(以下简称风扇)。

Cooling fan for internal combustion engines.Part 1:Technical requirements of metallic fan

JB/T 6003.3-2008 内燃机.机油冷却器.第3部分:传热性能试验方法

JB/T 6003的本部分规定了内燃机机油冷却器(以下简称冷却器)在给定条件下，冷、热流体的进出口温度、流量和压差的测定方法以及性能参数的计算方法。 本部分适用于汽车、拖拉机、工程机械、小型船舶、发电机组、液压传动等配套的各种结构型式的冷却器，其他用途结构类似的冷却器亦可参照执行。

Internal combustion engines.Oil coolers.Part 3:Test method for heat transfer capability

ASME PTC 30.1-2007 气冷式蒸汽冷凝器

This Code provides rules for determining the thermalperformance of the referenced equipment with regardto the steam flow capability while meeting any applicablefan power guarantees. This steam flow capabilitymay be alternatively expressed as a deviation fromdesign flow capability, a deviation from design turbinebackpressure, or as the absolute value of the steam turbinebackpressure. This Code also provides proceduresfor assessing compliance to specified dissolved oxygenand specified condensate temperature. This Code doesnot address procedures for assessing noise.The Code is not intended for tests of(a) devices for which the process fluid is above atmosphericpressure(b) devices for process fluids other than steam(c) devices for single-phase process fluids(d) wet surface air cooled condensers(e) natural draft or fan-assisted air cooled condensers(f) air-cooled condensers with inlet air conditioningin-serviceThe determination of special data or verification ofguarantees that are outside the scope of this Code shallbe made only with the written agreement of the partiesto the test. The agreed methods of measurement andcomputation shall be defined in writing and fullydescribed in the test report.

Air-Cooled Steam Condensers

ARMY MIL-DTL-32235-2007 I型加热模块一般规范

This specification describes the performance and design of a self-heatin heater module consisting of polymeric food trays, flameless heaters, activation fluid, heating trays and an activation mechanism.

HEATER MODULE, GENERAL SPECIFICATION FOR

JB/T 10592-2006 拖拉机柴油机散热器型式、参数和连接尺寸

本标准给出了拖拉机用柴油机水散热器的型式、主要参数和连接尺寸。 本标准适用于拖拉机和农用固定式、移动式柴油机冷却水用的管片式水散热器。

Tractor diesel engines.Cooling water radiators.Types, parameters and connecting dimensions

KS B 6416-2006 采暖铸铁散热器和采暖钢板散热器性能试验

이 규격은 증기를 사용하는 난방용 주철 방열기 및 난방용 강판 방열기의 방열 능력의 실용적

Test for radiation capacity of cast iron radiators and steel plate radiators for heating

DLA A-A-59411 VALID NOTICE 1-2006 便携式冷热水处理波纹机

A-A-59411, dated 11 February 2000, has been reviewed and determined to be valid for use in acquisition.

DIMPLING MACHINE, HOT AND COLD PROCESS, PORTABLE

ASTM D4725-06 发动机冷却剂标准术语

1.1 This document covers terminology relating to engine coolants. It is intended to provide a reference for anyone seeking information on engine coolants, and also to provide a uniform set of definitions for use in preparing ASTM specifications, test methods and other standard documents.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Terminology for Engine Coolants

JB/T 10506-2005 内燃机.增压空气冷却器.技术条件

本标准规定了内燃机增压空气冷却器的技术要求、试验方法及检验规则等。 本标准适用于汽车、拖拉机、工程机械用内燃机增压空气冷却器(以下简称中冷器)。其他用途的内燃机增压空气冷却器也可参照使用。

Internal combustion engines - Charge air coolers - Specification