J96 冷却系统与加热装置 标准查询与下载

JB/T 51044-1999 内燃机 水散热器 产品质量分等

Product quality classification of internal combustion engine water radiator

JB/T 51114-1999 内燃机 冷却水泵 产品质量分等

Quality grading of cooling water pumps for internal combustion engines

JB/T 51013-1999 柴油机 水冷却器 产品质量分等

Diesel Engine Water Cooler Product Quality Grading

JB/T 51129-1999 内燃机 冷凝式散热器 产品质量分等

Product quality classification of internal combustion engine condensing radiators

JB/T 8126.2-1999 内燃机.冷却水泵.性能试验方法

本标准规定了离心式冷却水泵的试验项目、试验条件、试验方法、性能参数计算、试验报告等。 本标准适用于中小功率内燃机无自吸要求的离心式冷却水泵。

Internal combustion engines.Performance test methods for cooling water pumps

JB/T 8126.1-1999 内燃机.冷却水泵.技术条件

本标准规定了内燃机冷却水泵的技术要求、试验方法、检验规则、标志、包装、运输、贮存等。 本标准适用于中小功率内燃机自吸式要求的离心式冷却水泵。

Internal combustion engines.Cooling water pumps.Specifications

JB/T 6723.3-1999 内燃机冷却风扇.第3部分：冷凝式内燃机冷却风扇.技术条件

本标准规定了冷凝式内燃机冷却风扇的分类、命名、技术要求、检验规则以及标志、包装和贮存。 本标准适用于冷凝式内燃机带发电机及不带发电机的两种冷却风扇。

Cooling fan for internal combustion engines.Part 3: Specifications for cooling fan of condensing engines

JB/T 6723.4-1999 内燃机冷却风扇.第4部分：冷凝式内燃机冷却风扇.试验方法

本标准规定了冷凝式内燃机冷却风扇的试验项目、方法、内容、数据计算、结果分析以及文件整理的要求。 本标准适用于冷凝式内燃机带发电机及不带发电机的两种冷却风扇。

Cooling fan for internal combustion engines.Part 4: Test method for cooling fan of condensing engines

CSA C815-99-1999 饮用水冷却器的能效性能.通用指令第1号.第2次修订

Energy Performance of Drinking-Water Coolers General Instruction No.1; Update No 2

Rendement Energetique Des Refroidisseurs D'Eau Potable Premiere Edition; Fiche No 1; Mise A Jour No 2

ASTM D3634-99e1 测定发动机冷却剂中痕量氯离子的试验方法

1.1 This test method covers the determination of chloride ion in engine coolants in the range of 5 to 200 ppm in the presence of up to 0.6 weight % mercaptobenzothiazole. 1.2 Other materials that react with silver ion will interfere. 1.3 Chloride in engine coolants containing an aryltriazole instead of mercaptobenzothiazole can be determined directly by this test method without pretreatment with hydrogen peroxide. 1.4 The values stated in SI units are to be regarded as the standard. 1.5 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 7.

Standard Test Method for Trace Chloride Ion in Engine Coolants

ASTM D1123-99(2009) 卡尔·费歇尔试剂法测定发动机冷却剂浓缩物中水含量的标准试验方法

The total apparent water in engine coolant concentrate as determined by Karl Fischer titrations consists of the fol- lowing: (1) water present in the original glycol base; (2) water added (for example, inhibitor solutions); (3) water of hydration of inhibitors (for example, Na 2B4O7·5H2O); ( 4) water formed in the chemical reaction between borate and ethylene glycol, producing boratediol condensate and water; and ( 5) quantitative interference by the reaction of the reagent with inhibitors such as tetraborate or sodium hydroxide.1.1 These test methods cover the determination of the water present in new or unused glycol-based coolant concentrates using a manual (Test Method A) or an automatic (Test Method B) coulometric titrator procedure. 1.2 Many carbonyl compounds react slowly with the Fischer reagent, causing a fading end point and leading to high results. A modified Fischer reagent procedure is included that minimizes these undesirable and interfering reactions. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazards statements see Sections 8 and 16.

Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method

ASTM D3634-99(2009) 测定发动机冷却剂中痕量氯离子的标准试验方法

This test method permits the determination of very low levels of chloride ion in engine coolants containing the common corrosion inhibitor, mercaptobenzothiazole, or related mercaptans, which would normally interfere with the titration by also forming insoluble silver salts with silver nitrate.1.1 This test method covers the determination of chloride ion in engine coolants in the range from 5 to 200 ppm in the presence of up to 0.6 weight % mercaptobenzothiazole. 1.2 Other materials that react with silver ion will interfere. 1.3 Chloride in engine coolants containing an aryltriazole instead of mercaptobenzothiazole can be determined directly by this test method without pretreatment with hydrogen peroxide. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 7.

Standard Test Method for Trace Chloride Ion in Engine Coolants

ARI 450-1999 远程类水冷冷凝器

This standard applies to water-cooled refrigerant condensers.

Water-Cooled Refrigerant Condensers, Remote Type

ASTM D3634-99(2005)e1 测定发动机冷却剂中痕量氯离子的试验方法

This test method permits the determination of very low levels of chloride ion in engine coolants containing the common corrosion inhibitor, mercaptobenzothiazole, or related mercaptans, which would normally interfere with the titration by also forming insoluble silver salts with silver nitrate.1.1 This test method covers the determination of chloride ion in engine coolants in the range from 5 to 200 ppm in the presence of up to 0.6 weight % mercaptobenzothiazole.1.2 Other materials that react with silver ion will interfere.1.3 Chloride in engine coolants containing an aryltriazole instead of mercaptobenzothiazole can be determined directly by this test method without pretreatment with hydrogen peroxide.1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 7.

Standard Test Method for Trace Chloride Ion in Engine Coolants

KS B 6402-1998 蒸汽疏水阀

이 규격은 다음에 나타낸 증기 트랩에 대하여 규정한다.<< 이하 원문 참조

Steam traps

ARMY MIL-PRF-53047 B-1998 柴油动力型冷水机组

his specification covers a small, mobile, diesel fuel powered water chiller and accessories.

WATER CHILLER, SMALL, MOBILE, DIESEL FUEL POWERED

ASME PTC 12.2-1998 表面蒸汽冷凝器

This Code provides directions and rules for conducting and reporting performance tests of water-cooled, steam surface condensers, hereafter referred to as condensers. The Code provides explicit test procedures to yield results of the highest level of accuracy consistent with the best engineering knowledge and practice currently available. The main purpose of this Code is to provide rules for performing condenser acceptance tests. It also provides guidelines for the routine performance evaluation of condensers. The acceptance test can be used to determine compliance with contractual obligations and can be incorporated into commercial agreements. The test shall be considered an ASME Code Test only if the test procedures comply with those detailed recommendations in this Code and that the pretest and post-test uncertainty analysis complies with Subsections 1.3 and 5.4. The four measures of performance are; the absolute pressure maintained by the condenser, or its projected design pressure [with an uncertainty of +/- 0.12 in. Hg.], the extent of condensate subcooling [+/1 0.2鳩], the amount of dissolved oxygen [+/ 1.0 ppb] and the tubeside pressure drop [with an uncertainy of +/1 2%].

Steam Surface Condensers

ASTM D4725-98 发动机冷却剂标准术语

Standard Terminology for Engine Coolants

JB/T 8580-1997 柴油机用氮化硅电热塞 技术条件

本标准规定了柴油机用氮化硅电热塞的产品分类、技术要求、试验方法、检验规则、标志和包装。

Specifications for silicon nitride glow plugs for diesel engines

JB/T 8577-1997 内燃机水散热器技术条件

JB/T 8577-1997 本标准规定了内燃机水散热器的技术要求，试验方法，检验规则及标志、包装、运输和贮存。 本标准适用于内燃机管片式和管带式水散热器（以下简称散热器）。

Specifications for water radiators for internal combustion engines