K11 裸电线 标准查询与下载

NB/T 10473-2020 架空导线用钢绞线

Steel strands for overhead conductors

NB/T 10306-2019 电缆屏蔽用铜带

Copper tape for cable shielding

NB/T 10305-2019 架空线路预绞式金具用铝合金线

Aluminum alloy wire for pre-twisted fittings for overhead lines

NB/T 10196-2019 架空导线单位产品能源消耗限额

Energy consumption limit per unit product for overhead conductors

NB/T 10194-2019 电工用火法精炼高导电铜杆

Electricians use fire method to refine highly conductive copper rods

NB/T 10195-2019 架空导线生产企业能效指数计算导则

Guidelines for calculating energy efficiency index for overhead conductor manufacturers

JIS C 3110:2019 钢芯铝绞线

Aluminium conductors steel reinforced

JIS H 7311:2018 超导性.交流电损耗测量.多芯复合超导体磁滞损耗的磁强计测量法

Superconductivity -- AC loss measurements -- Magnetometer methods for hysteresis loss in superconducting multifilamentary composites

JIS H 7308:2017 超导性.基块超导体体积比例的测量.Nb3Sn复合超导金属线的铜对非铜体积比例

Superconductivity -- Matrix to superconductor volume ratio measurement -- Copper to non-copper volume ratio of Nb3Sn composite superconducting wires

IEC 60317-68:2017 特殊类型绕组线的规范 第68部分：聚乙烯醇缩醛漆包矩形铝线，120 级

This part of IEC 60317 specifies the requirements of enamelled rectangular aluminium winding wire of class 120 with a sole coating based on polyvinyl acetal resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance of application characteristics. Wires of grade 1 and grade 2 are included in this part of IEC 60317 and apply to the complete range of conductors. The specified combinations of width and thickness as well as the specific ratio width/thickness are given in IEC 60317-0-9.

Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120

NB/T 42106-2016 铝管支撑性耐热铝合金扩径导线

Aluminum tube supporting heat-resistant aluminum alloy expanded diameter wire

JIS C 3108:2016 电气用硬拉制铝线

Hard-drawn aluminium wires for electric purposes

DIN EN 50182 Berichtigung 2:2016 架空线路用导线.圆线共轴布线绞合导线

Conductors for overhead lines - Round wire concentric lay stranded conductors; German version EN 50182:2001, Corrigendum to DIN EN 50182:2001-12; German version EN 50182:2001/AC:2013

ASTM B231/B231M-16 同轴绞合铝1350导体的标准规范

1.1 This specification covers aluminum 1350-H19 (extra hard), 1350-H16 or -H26 (3/4 hard), 1350-H14 or -H24 (1/2 hard), and 1350-H142 or -H242 (1/2 hard), bare concentric-lay-stranded conductors constructed with a straight round central wire surrounded by one or more layers of helically layed wires. The conductors are for general use for electrical purposes (Explanatory Note 1 and Note 2). 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.2.1 For density, resistivity and temperature, the values stated in SI units are to be regarded as standard. Note 1: Prior to 1975, aluminum 1350 was designated as EC aluminum. Note 2: The aluminum and temper designations conform to ANSI Standard H35.1/H35.1M. Aluminum 1350 corresponds to Unified Numbering System A91350 in accordance with Practice E527. Note 3: Sealed conductors that are intended to prevent longitudinal water propagation and are further covered/insulated are also permitted within the guidelines of this specification.

Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors

NB/T 42061-2015 钢芯软铝绞线

本标准规定了钢芯软铝绞线的产品命名及表示方法、技术要求、试验方法、检验规则、包装和标志等。本标准适用于架空输电线路用钢芯软铅绞线。

The annealed aluminium conductors steel supported

NB/T 42060-2015 钢芯耐热铝合金架空导线

本标准规定了钢芯耐热铝合金架空导线的产品命名及表示方法、要求、试验、包装和标志等内容。本标准规定的钢芯耐热铝合金架空导线包括钢芯耐热铝合金绞线和铝包钢芯耐热铝合金绞线，其结构由下述的金属单线组合而成：a）架空绞线用耐热铝合金线最高允许连续运行温度为150℃的耐热铝合金线，型号为NRLH1，符合GB/T 30551-2014；最高允许连续运行温度为150℃的高强度耐热铝合金线，型号为NRLH2，符合GB/T30551-2014。b）架空绞线用镀锌钢线1级强度镀锌钢线，型号为G1A，符合GB/T 3428-2012；2级强度镀锌钢线，型号为G2A，符合GB/T 3428-2012；3级强度镀锌钢线，型号为G3A，符合GB/T 3428-2012；4级强度镀锌钢线，型号为G4A，符合GB/T 3428-2012;5级强度镀锌钢线，型号为G5A，符合GB/T 3428-2012。c）电工用铝包钢线14%IACS铝包钢线，型号为 LB14，符合 GB/T 17937-2009；20.3%IACS铝包钢线，型号为 LB20A，符合 GB/T 17937-2009。镀锌钢线的镀层金属亦可采用特种镀锌层，如锌-5%铝-稀土合金镀层、55%铝-锌合金镀层等耐蚀性较好的镀层，但机械和电气性能仍应符合GB/T 3428-2012。采用上述特定单线组合成的导线应在订货时另加说明。本标准包括的各类钢芯耐热铝合金架空导线型号和名称见表1。

Thermal-resistant aluminum-alloy conductors, steel core reinforced for overhead transmission line

NB/T 42062-2015 扩径型钢芯铝绞线

Expanded diameter steel core aluminum stranded wire

ASTM B371/B371M-15 铜锌硅合金杆材的标准规格

1.1 This specification establishes the requirements for copper-zinc-silicon alloy rod produced in Copper Alloy UNS Nos. C69240, C69300, C69400, C69430, C69700, and C69710. 1.1.1 If the purchaser does not specify the alloy to be supplied, product is permitted to be furnished in any of the alloys named in 1.1. 1.2 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 The following safety hazard caveat pertains only to the test methods described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. 1.4 Warning—Mercury has been designated by many regulatory agencies as a hazardous material that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury containing products. See the applicable product Safety Data Sheet (SDS) for additional information. Users should be aware that selling mercury and/or mercury containing products into your state or country may be prohibited by law.

Standard Specification for Copper-Zinc-Silicon Alloy Rod

NB/T 42042-2014 架空绞线用中强度铝合金线

本标准规定了架空绞线用中强度铝合金线的产品型号、规格、电气和机械性能、验收规则、包装及标志等。 本标准适用于生产架空输电线路用绞线的中强度铝合金线。

Intermediate strength aluminium alloy wire for overhead line conductors

SJ/T 11472-2014 镀锡铜包铝线

本标准规定了镀锡铜包铝线的分类与型号、材料、技术要求和试验方法、检验规则、包装和标志。本标准适用于以软态铜包铝线为基线的镀锡铜包铝线。本产品的主要用途为电缆屏蔽线,其他用途也可选用。

Tinned copper-clad aluminum wire