L10 电子元件综合 标准查询与下载

SJ/T 11610-2016 电子电气产品挥发性有机化合物和醛酮类化合物释放速率检测方法

Method for detection of release rate of volatile organic compounds and aldehydes and ketones from electronic and electrical products

IEC 61726:2015 电缆配件、电缆、连接器和无源微波元件.利用混响室法测量滤屏衰减

The requirements of modern electronic equipment have indicated a demand for a method for testing screening attenuation of microwave components over their whole frequency range. Convenient test methods exist for low frequencies and components of regular shape. These test methods are described in the relevant IEC product specifications (e. g. IEC 62153-4-3). For higher frequencies and for components of irregular shape, a new test method has become necessary and such a test method is described in this International Standard. This International Standard describes the measurement of screening attenuation by the reverberation chamber test method, sometimes named mode stirred chamber, suitable for virtually any type of microwave component and having no theoretical upper frequency limit. It is only limited toward low frequencies due to the size of the test equipment, which is frequency- dependent and is only one of several methods of measuring screening attenuation. For the purpose of this standard, examples of microwave components are waveguides, phase shifters, diplexers/multiplexers, power dividers/combiners etc.

Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method

BS EN 61760-4:2015 表面安装技术. 湿度敏感器件的分类, 包装, 标记和处理

Surface mounting technology. Classification, packaging, labelling and handling of moisture sensitive devices

IEC 60940:2015 抑制电磁干扰用电容器、电阻器、电感器及整套滤波装置应用的指导信息

This international standard provides guidance applicable to information on application of capacitors@ resistors@ inductors@ and complete filter units for electromagnetic interference suppression.

Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression

IEC 60063:2015 电阻器和电容器优先数系

Preferred number series for resistors and capacitors

SJ/T 11468-2014 电子电气产品有害物质限制使用 术语

本标准界定了电子电气产品有害物质限制使用领域相关术语和定义。本标准适用于电子电气产品有害物质限制使用相关领域。

Restriction of hazardous substances in electrical and electronic products.Terminology

SJ/T 11467-2014 电子电气产品中的有害物质风险评估指南

Guidelines for Risk Assessment of Hazardous Substances in Electrical and Electronic Products

SAE AS6496-2014 欺诈/假冒电子零件: 废止, 检测, 缓解以及处置. 授权/特许经营

This SAE Aerospace Standard (AS) identifies the requirements for mitigating counterfeit products in the Authorized Distribution supply chain by the Authorized Distributor. If not performing Authorized Distribution, such as an Authorized Reseller, Broker, or Independent Distributor, refer to another applicable SAE standard.

Fraudulent/Counterfeit Electronic Parts: Avoidance, Detection, Mitigation, and Disposition - Authorized/Franchised Distribution

IECQ 01-2014 电子元器件用IEC质量评估体系(IECQ体系).基本规则

IEC quality assessment system for electronic components (IECQ system) - Basic rules

IECQ CS 033200-TW0001-2014 电子元件用IEC质量评估体系(IECQ体系). 元件规格. 触控面板. 电阻式触控面板

IEC Quality Assessment System for Electronic Components (IECQ System) - Component specification - Touch panels - Resistive touch panel

IECQ 03-5-2014 电子元器件的IEC质量评价体系(IECQ体系).程序规则.第5部分:IECQ HSPM计划.有害物质过程管理要求

IEC Quality Assessment System for Electronic Components (IECQ System) - Rules of Procedure - Part 5: IECQ HSPM Scheme - Hazardous Substance Process Management Requirements

BS EN 60286-4:2013 自动装配用元件的包装.封装在不同形式包装件中的电子元件用料盒

Packaging of components for automatic handling. Stick magazines for electronic components encapsulated in packages of different forms

SJ/T 3273-2013 高压元件和组件的安全要求

本标准规定了由电网电源、电源设备、电池或远程馈电系统供电的电子及有关设备中使用的工作电压超过4kV (峰值)的高压元件和组件的安全要求和试验方法。本标准适用于但不限于回扫变压器、高压倍增器、显像管管座。

Safety requirements of high voltage components and sets

IEC 60286-4:2013 自动装配用元件的包装.第4部分:封装在不同形式包装件中的电子元件用料盒

This part of IEC 60286 is applicable to stick magazines (including end stoppers) intended to be used for storage of electronic components@ for transport from the manufacturer to the customer and for in-house use in the manufacturing plant. They are also used to feed automatic placement machines for surface mounting as well as for through-hole mounting of electronic components.

Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms

IECQ 03-7-2013 电子元器件的IEC质量评价体系(IECQ体系).程序规则.第7部分:IECQ伪造回避计划(IECQ AP-CAP).计划要求

IEC Quality Assessment System for Electronic Components (IECQ System) - Rules of Procedure - Part 7: IECQ Counterfeit Avoidance Programme (IECQ AP-CAP) Program Requirements

IECQ 02-2013 IEC电子元器件质量评定体系 (IECQ体系). 程序规则. IECQ体系验收IECQ认证机构用通用要求

IEC Quality Assessment System for Electronic Components (IECQ System) - Rules of Procedure - General Requirements for the Acceptance of IECQ Certification Bodies into the IECQ System

IECQ 01A-2013 电子元件用IEC质量评估体系(IECQ体系).IECQ指南.IECQ标识和IECQ合格标志的使用导则

IEC quality assessment system for electronic components (IECQ system) - IECQ Guide - Guidance for the use of the IECQ Logo and IECQ Mark of Conformity

DB44/T 1117-2013 片式元件高速编带机

本标准规定了片式元件高速编带机的术语和定义、工作条件、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于编带速度≥600 pcs/min的片式元件编带机(以下简称编带机)。

Chip component high speed braiding machine

BS EN 61360-2:2013 电气元器件的标准数据元素类型和相关分类模式EXPRESS字典模式

Standard data element types with associated classification scheme for electric components. EXPRESS dictionary schema

IECQ 03-3-2013 电子元器件的IEC质量评价体系(IECQ体系).程序规则.第3部分:IECQ批准的元件产品,相关材料和组装件计划

IEC Quality Assessment System for Electronic Components (IECQ System) - Rules of Procedure - Part 3: IECQ Approved Component Products, Related Materials & Assemblies Scheme