L63 计算机外围设备 标准查询与下载

ASTM F2218-02(2008) 计算机化系统用硬件工具的标准指南

This guide is aimed at providing a general understanding of the various types of hardware devices that form the core of information processing systems for ship and marine use. Ship and marine information processing systems require specific devices in order to perform automated tasks in a specialized environment. In addition to providing information services for each individual installation, these devices are often networked and are capable of supplementary functions that benefits ship and marine operations. A variety of choices exists for deployment of information processing devices and greatly increases the complexity of the selection task for ship and marine systems. The choice of a particular device or system cannot be made solely on the singular requirements of one application or function. Modern information processing systems are usually installed in a complex environment where systems must be made to interact with each other. Ship and marine installations add an even further layer of complexity to the process of choosing adequate computerized systems. This guide aims to alleviate this task by giving users specific choices that are proven technologies that perform in a complex environment. Hardware resources used in ship and marine installations are a result of careful consideration of utility and function. These resources may require some physical specialization in order to inhabit a particular environment, but they are in no way different from equipment used in shore-based situations. Ship and marine computer system configurations, interconnections, and support services are essentially the same as those found in a land-based network environment and as a result, the skill sets of ship and marine information processing system users, administrators, and support personnel are interchangeable with those of shore-based activities.1.1 This guide provides assistance in the choice of computing hardware resources for ship and marine environments and describes: 1.1.1 The core characteristics of interoperable systems that can be incorporated into accepted concepts such as the Open System Interconnection (OSI) model; 1.1.2 Process-based models, such as the Technical Reference Model (TRM), that rely on interoperable computing hardware resources to provide the connection between the operator, network, application, and information; and, 1.1.3 The integrated architecture that can be used to meet minimum information processing requirements for ship and marine environments. 1.2 The use of models such as OSI and TRM provide a structured method for design and implementation of practical shipboard information processing systems and provides planners and architects with a roadmap that can be easily understood and conveyed to implementers. The use of such models permit functional capabilities to be embodied within concrete systems and equipment. 1.3 The information provided in this guide is understood to represent a set of concepts and technologies that have, over time, evolved into accepted standards that are proven in various functional applications. However, the one universal notion that still remains from the earliest days of information processing is that technological change is inevitable. Accordingly, the user of this guide must understand that such progress may rapidly invalidate or supersede the information contained herein. Nonetheless, the concept of implementing ship and marine computing systems based on these functional principles allows for logical and rational development and provides a sound process for eventual upgrade and improvement.

Standard Guide for Hardware Implementation for Computerized Systems

DLA SMD-5962-88716 REV B-2002 硅单片双逆变驱动器高速线性微电路

This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.

MICROCIRCUIT, LINEAR, HIGH SPEED, DUAL INVERTING DRIVER, MONOLITHIC SILICON

ASTM F2218-02 计算机化系统用硬件工具的标准指南

1.1 This guide provides assistance in the choice of computing hardware resources for ship and marine environments and describes:1.1.1 The core characteristics of interoperable systems that can be incorporated into accepted concepts such as the Open System Interconnection (OSI) model;1.1.2 Process-based models, such as the Technical Reference Model (TRM), that rely on interoperable computing hardware resources to provide the connection between the operator, network, application, and information; and,1.1.3 The integrated architecture that can be used to meet minimum information processing requirements for ship and marine environments.1.2 The use of models such as OSI and TRM provide a structured method for design and implementation of practical shipboard information processing systems and provides planners and architects with a roadmap that can be easily understood and conveyed to implementers. The use of such models permit functional capabilities to be embodied within concrete systems and equipment.1.3 The information provided in this guide is understood to represent a set of concepts and technologies that have, over time, evolved into accepted standards that are proven in various functional applications. However, the one universal notion that still remains from the earliest days of information processing is that technological change is inevitable. Accordingly, the user of this guide must understand that such progress may rapidly invalidate or supersede the information contained herein. Nonetheless, the concept of implementing ship and marine computing systems based on these functional principles allows for logical and rational development and provides a sound process for eventual upgrade and improvement.

Standard Guide for Hardware Implementation for Computerized Systems

ANSI/BHMA A156.16-2002 辅助硬件

Establishes requirements for various types of auxiliary hardware and includes performance tests covering operational, cyclical, strength or finish criteria. A type numbering system is also provided.

Auxiliary Hardware

KS C 9705-2001 微波治疗

이 규격은 마이크로파 에너지를 환자에 투사시켜 치료를 하는 장치에 대하여 규정한다. 다만,

Microwave therapy epuipment

KS X 5304-2001 信息处理.80列打孔纸卡.矩形纸卡孔洞位置和尺寸

이 규격은 KS X 5301에 규정한 정보 교환용 종이 카드(이하 종이 카드라 한다)에 뚫

Information processing-80 columns punched paper cards-Dimensions and location of rectangular punched holes

KS X 5302-2001 信息处理.穿孔纸带.穿孔位置和尺度

이 규격은 KS X 5301에 규정한 정보 교환용 종이 테이프의 구멍 위치와 치수(이하 종

Information processing－Punched paper tape－Dimensions and location of feed holes and code holes

KS X 5909-2001 缩微胶卷的品质和保存方法

1.1 ? ??? ????? ??????? ???? ?? ? ?? ??? ??? ?? ??

Quality and storage method of microfilm

DLA SMD-5962-95633 REV A-2001 双重围绕或驱动器硅单片电路线型微电路

This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V).

MICROCIRCUIT, LINEAR, DUAL PERIPHERAL OR DRIVER, MONOLITHIC SILICON

PD CR 13644-2001 机器可读卡.保健用.保健专业卡的数据的逻辑结构

Machine readable cards. Healthcare applications. Logical organization of data on healthcare professional cards

PD CR 13643-2001 机器可读卡.保健用.在保健时病人使用的不同卡的逻辑数据结构和概念.

Machine readable cards. Healthcare applications. Logical data structures and concepts for different card technologies for use by patients in health applications

IEC 61966-7-1:2001 多媒体系统与设备 色彩测量和管理 第7-1部分：彩印机 反射EP RGB输入

This part of IEC 61966 specifies a set of data in colour digital image files for measurements, sampling of successive prints, measurement conditions and forms of reporting the results so as to make possible the characterization of the colour printer and comparison of the results of measurements. The sets of data for measurements are in colour digital image files expressed in a red - green - blue colour space, to which corresponding colour images are reproduced on reflective substrate. The methods of measurement in this standard are designed to be applicable to reflective colour prints for consumer use. The reflective colour prints may be produced by non-impact colour printers, incorporating such technologies as ink-jet, sublimation transfer, thermal transfer, electro-photography and other similar technologies. This standard does not specify limiting values for various attributes.

Multimedia systems and equipment - Colour measurement and management - Part 7-1: Colour printers; Reflective prints; RGB inputs

KS X 5751-2001 只读120mmDVD(数字视频光盘)

? ??? ?? ??? 120mm ? ???? ???, ??? ??? ??? ??? ??

Information technology - 120mm DVD - Read-only disk

IEC 61966-8:2001 多媒体系统与设备 色彩测量和管理 第8部分：多媒体彩色扫描器

This part 8 of IEC 61966 is applicable to the characterization and assessment of multimedia colour scanners used in computer systems, multimedia and similar applications. The methods of measurement standardized in this part are designed to make possible the characterization and objective performance assessment of multimedia colour scanners which can capture colour images and output colour information such as red, green and blue data from reflective originals. The measured results are intended to be used for the purpose of colour management in multimedia systems. Measurement conditions, possible methods of measurement and characterization are defined to make colour management possible. Colour control within the equipment is out of the scope of this part. For calibration of prepress input scanners, ISO 12641 will be applied.

Multimedia systems and equipment - Colour measurement and management - Part 8: Multimedia colour scanners

ANSI/INCITS/ISO/IEC 13660:2001 信息技术.办公设备.硬拷贝输出用图像质量属性的测量.二进制单色文本和图形图像

Specifies device-independent image quality attributes, measurement methods, and analytical procedures to describe the quality of output images from hardcopy devices. This International Standard is applicable to human-readable documents composed of binary monochrome images produced from impact printers, non-impact printers, and copiers.

Information technology - Office equipment - Measurement of Image Quality attributes for Hardcopy Output - Binary monochrome text and graphic images

DLA SMD-5962-96570 REV B-2001 抗辐射数字的互补金属氧化物半导体,八角缓冲器和线路三状态线路驱动器,硅单片电路线型微电路

This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.

MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, OCTAL BUFFER AND LINE DRIVER WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON

ANSI/INCITS 347-2001 BIOS增强磁盘驱动服务(EDD)

Describes in detail BIOS functions and data structures that are used as an abstraction layer to allow higher-level applications to access mass storage devices in an interface and command-set-independent manner. To comply with this standard, higher-level software shall call the INT functions using the data structures described in this standard; and system firmware shall provide the INT functions and data structures described in this standard. This standard assumes that the reader is familiar with the conventional INT 13h interface, the usage of the BIOS Device Parameter Table, and the basic operation of mass storage devices.

BIOS Enhanced Disk Drive Services (EDD)

ITU-T Y.1701-2001 一般设备管理功能要求 系列Y 第15研究组

This Recommendation addresses the Equipment Management Functions (EMFs) inside a transport Network Element that are common to multiple technologies. For example, common applications are described for Date & Time, Fault Management, Configuration Management

Common equipment management function requirements - SERIES Y: GLOBAL INFORMATION INFRASTRUCTURE AND INTERNET PROTOCOL ASPECTS - Internet protocol aspects - Operation, administration and maintenance Study Group 15; G.7710

ASTM F1857-01(2006) 与喷墨打印机及其打印图像相关的标准术语

The definitions in this terminology relate directly or indirectly to business imaging hard copy printing using ink jet printers.

Standard Terminology Relating to Ink Jet Printers and Images Made Therefrom

ASTM F1857-01 与喷墨打印机及其打印图像相关的标准术语

1.1 The definitions in this terminology relate directly or indirectly to business imaging hard copy printing using ink jet printers.

Standard Terminology Relating to Ink Jet Printers and Images Made Therefrom