P30 工业与民用建筑工程综合 标准查询与下载

DB22/T 5018-2019 真空绝热板外墙外保温工程技术标准

Technical standard for external wall thermal insulation engineering of vacuum insulation panels

DB22/T 5017-2019 建筑废弃物再生骨料应用技术标准

Technical standards for the application of recycled aggregates from construction waste

DB22/T 5012-2018 民用建筑节能门窗工程技术标准

Engineering technical standards for energy-saving doors and windows of civil buildings

DB22/T 5011-2018 模塑聚苯乙烯泡沫塑料板外墙外保温工程技术标准

Engineering technical standard for external wall insulation of molded polystyrene foam board

DB11/T 1587-2018 公共场所雷电风险等级划分

Classification of lightning risk in public places

DB11/T 1586-2018 雷电防护装置检测安全作业规范

Lightning protection device detection safety operation specification

DB11/T 1606-2018 绿色雪上运动场馆评价标准

Evaluation criteria for green snow sports venues

DB37/T 5127-2018 装配式建筑评价标准

本标准适用于评价山东省民用建筑的装配化程度。

Prefabricated Building Evaluation Standards

DB37/T 5115-2018 装配式钢结构建筑技术规程

本规程适用于建筑工程中装配式钢结构建筑的设计、制作、安装、验收、使用和维护。

Technical specification for prefabricated steel structure buildings

BS 8300-2:2018 设计一个无障碍和包容性的建筑环境. 建筑物. 实施规程

Design of an accessible and inclusive built environment. Buildings. Code of practice

ISO 9836:2017 建筑物的性能标准.面积和空间指标的定义和计算

This document specifies the definition and calculation of surface area and volume indicators. In defining area measurement, this document uses three measurement concepts: a) the intra-muros and extra-muros concept used in many parts of the world; c) variations on these methods to comply with certain national laws or for particular types of buildings. b) the wall centre method of measurement used in many parts of the world; The surface area and volume indicators defined in this document are intended for practical use, as a basis for measuring various aspects of the performance of buildings or as a planning aid. In other words, they should enable judgement to be made on functional, technical and economic aspects of buildings. This document is intended to be used when establishing — specifications for the geometric performance of a building and its spaces (e.g. in design, purchasing procedures, etc., or in building regulations where appropriate), — technical documentation relating to the performance of whole buildings prepared by designers, contractors and manufacturers, — the amount of floor area that will not be effectively available for the placement of an individual’s workplace, furniture, equipment, or for circulation, and — evaluation, comparison or control of the properties of a building which are connected to its geometric performance. NOTE Although there are a variety of methods of area measurement around the world depending on the country and/or types of buildings, all measuring methods are not necessarily of practical use because of inability to identify real area (e.g. the wall centre method of measurement). Thus, this document specializes in the measurement solely for practical use.

Performance standards in building - Definition and calculation of area and space indicators

DB50/T 769-2017 城镇建筑物信息调查技术规程

本标准适用于重庆市主城区、各区县（自治县）城市、镇建成区范围内已完成建设工程竣工规划核实的建筑物、主体结构封顶但尚未开展建设工程竣工规划核实的建筑物以及被拆除的建筑物信息调查，重庆市的乡和村等其他区域的建筑物信息调查工作可参照使用。

Technical specification for urban building information survey

BS ISO 15686-7:2017 建筑物和建筑资产 使用寿命规划 实践中使用寿命数据反馈的性能评估

Buildings and constructed assets. Service life planning. Performance evaluation for feedback of service life data from practice

EN 15378-1:2017 建筑物的能源性能-建筑物的供暖系统和DHW-第1部分:锅炉,供暖系统和DHW的检查,M3-11,M8-11

This document specifies inspection procedures for the assessment of energy performance of existing boilers and heating systems. Heat generators types covered by this standard are: - boilers for heating, domestic hot water or both; - gas, liquid, solid fuel fired combustion boilers; - electrically driven and gas driven heat pumps; - thermal solar systems for domestic hot water, heating or both; - other heat generators types, such as cogeneration units. Parts of heating systems covered by this standard are; - heat generators, including generation control; - heating distribution network, including associated components and controls; - heating emitters, including components and controls; - space heating control system; - heat storage and associated components; - domestic hot water production system. This standard covers issues related to energy conservation and environmental performance.

Energy performance of buildings - Heating systems and DHW in buildings - Part 1: Inspection of boilers@ heating systems and DHW@ Module M3-11@ M8-11

EN 15316-4-3:2017 建筑物的能量性能-系统能量需求和系统效率计算方法-第4-3部分:热发电系统,热太阳能和光伏系统,模块M3-8-3,M8-8-3,M11-8-3

This European Standard specifies the: - required inputs; - calculation method; - required and resulting outputs, for heat generation systems, thermal solar systems (for space heating, domestic hot water production and the combination of both) and for photovoltaic systems applied in buildings. Within this standard, 6 methods are specified each method has its own range of applicability; - Method 1, is applicable for solar domestic hot water systems characterized by the EN 12976 series (factory made) or EN 12977-2 (custom built). The main output of the method is the solar heat and back up heat contribution to the requested heat use; - Method 2, is applicable for systems for domestic hot water and / or space heating with components characterized by EN ISO 9806 and EN 12977-3 or EN 12977-4 with a monthly calculation time step. The main output of the method is the solar heat and back up heat contribution to the requested heat use; - Method 3, is applicable for systems for domestic hot water and / or space heating with components characterized by EN ISO 9806 with an hourly calculation time step. The main output of the method is collector loop heat supplied to the heat storage; - Method 4, is applicable for photovoltaic systems with components characterized by standards and with an annual calculation time step. The output of the method is the produced electricity; - Method 5, is applicable for photovoltaic systems with components characterized by standards and with a monthly calculation time step. The output of the method is the produced electricity; - Method 6, is applicable for photovoltaic systems with components characterized by standards and with a calculation time step. The output of the method is the produced electricity. These three last calculation methods do not take into account; - electrical storage; - PV/thermal photovoltaic systems. Primary energy savings and CO2 savings, which can be achieved by photovoltaic systems compared to other systems, are calculated according to EN ISO 52000-1.

Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-3: Heat generation systems@ thermal solar and photovoltaic systems@ Module M3-8-3@ M8-8-3@ M11-8-3

EN 15193-1:2017 建筑物的能源性能-照明的能源要求-第1部分:规格,模块M9

This standard specifies the methodology for evaluating the energy performance of lighting systems for providing general illumination in residential and non-residential buildings and for calculating or measuring the amount of energy required or used for lighting in buildings. The method may be applied to new, existing or refurbished buildings. It also provides a methodology (LENI) as the measure of the energy efficiency of the lighting installations in buildings. This standard does not cover lighting requirements, the design of lighting systems, the planning of lighting installations, the characteristics of lighting equipment (lamps, control gear and luminaires) and systems used for display lighting, desk lighting or luminaires built into furniture. This standard does not provide any procedure for the dynamic simulation of lighting scene setting. Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1. NOTE In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation. The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively.

Energy performance of buildings - Energy requirements for lighting - Part 1: Specifications@ Module M9

EN 15316-4-2:2017 建筑物的能量性能-系统能量需求和系统效率计算方法-第4-2部分:空间加热系统,热泵系统,模块M3-8-2,M8-8-2

This European Standard covers heat pumps for space heating, heat pump water heaters (HPWH) and heat pumps with combined space heating and domestic hot water production in alternate or simultaneous operation, where the same heat pump delivers the heat to cover the space heating and domestic hot water heat requirement. The standard provides a calculation method under steady conditions that corresponds to one calculation step. The results of this calculation are incorporated in larger building models and take in account the influence of the external conditions and building control that influence the energy requirements for heating supplied by the heat pump system. The scope of this part is to standardize the:- required inputs; - calculation methods; - required outputs Generation for space heating and domestic hot water production of the following heat pump systems, including control of; - electrically-driven vapour compression cycle (VCC) heat pumps; - combustion engine-driven vapour compression cycle heat pumps; - thermally-driven vapour absorption cycle (VAC) heat pumps, using combinations of heat source and heat distribution listed in Table 1.

Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-2: Space heating generation systems@ heat pump systems@ Module M3-8-2@ M8-8-2

EN 15378-3:2017 建筑物的能源性能-建筑物的供暖和DHW系统-第3部分:测量能源性能,模块M3-10,M8-10

This European Standard specifies methods to assess the delivered energy for space heating and domestic hot water energy performance of a building based on measurements during the operation and occupancy phase. This includes: - assessment of the amount of delivered energy carriers for space heating and domestic hot water preparation based on measurement; - assessment of the energy performance indicators of heating and domestic hot water systems and subsystems based on measurements. This standard does not cover the measurement of delivered energy for ventilation, cooling, air conditioning and lighting systems. This standard includes procedures to correct measured delivered energy according to climate and building use. Weighting (e. g. conversion into primary energy, cost, CO2 emission) of the measured delivered energy and assessment of the energy performance are covered in EN ISO 52000-1:2017. Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1:2017.

Energy performance of buildings - Heating and DHW systems in buildings - Part 3: Measured energy performance@ Module M3-10@ M8-10

EN 15316-4-4:2017 建筑物的能量性能-系统能量需求和系统效率的计算方法-第4-4:热发电系统,建筑集成的热电联产系统,M8-3-4,M8-8-4,M8-11-4

This European Standard defines a method for the performance assessment of building-integrated cogeneration units by the calculation of the electricity production, useful heat output and recoverable losses. Such units are commonly known as micro or small scale cogeneration, or micro or small scale CHP. A building-integrated cogeneration, is a cogeneration unit installed to supply space heating, domestic hot water and possibly cooling within a building. It could operate as the only heating/cooling appliance of the building or in combination with other heat generators, such as boilers or electrical chillers. Unlike district heating systems, where heat and electricity are generated at central plants and transmitted through networks to a number of remote buildings, a building-integrated cogeneration unit produces useful heat for uses within the building. The electricity produced by the integrated cogeneration unit may be used within the building or may be exported. This standard deals with heat generators for heating or for combined domestic hot water and heating services. The calculation is based on the performance characteristics of the units, defined in product standards, and on operation conditions such the needed heat output. Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1.

Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-4: Heat generation systems@ building-integrated cogeneration systems@ Module M8-3-4@ M8-8-4@ M8-11-4

EN 15316-4-8:2017 建筑物的能量性能-系统能量需求和系统效率计算方法-第4-8部分:空间加热系统,空气加热和顶部辐射供暖系统,包括炉具(局部),模块M3-8-8

This European Standard is part of a series of standards on the method for calculation of system energy requirements and system efficiencies. The scope of this specific part is to standardize the:- required inputs; - calculation method; - resulting outputs, for space heating generation by; - air heating systems, including control; - overhead radiant heating systems for non-domestic use, including control; and; - stoves and local heaters for residential use. This standard does not apply to heating systems that utilize water as a heat transfer medium. Other heat generation systems such as boilers, heat pumps and others are covered in other sub modules of M3-8.

Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-8: Space heating generation systems@ air heating and overhead radiant heating systems@ including stoves (local)@ Module M3-8-8