P30 工业与民用建筑工程综合 标准查询与下载
共找到 354 条与 工业与民用建筑工程综合 相关的标准，共 24 页
This European Standard is part of a series of standards on the method for calculation of system energy requirements and system efficiencies. The scope of this specific part is to standardize the:- required inputs; - calculation method; - resulting outputs, for space heating generation by; - air heating systems, including control; - overhead radiant heating systems for non-domestic use, including control; and; - stoves and local heaters for residential use. This standard does not apply to heating systems that utilize water as a heat transfer medium. Other heat generation systems such as boilers, heat pumps and others are covered in other sub modules of M3-8.
Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-8: Space heating generation systems@ air heating and overhead radiant heating systems@ including stoves (local)@ Module M3-8-8
- ICS
- 91.140.10
- CCS
- P30
- 发布
- 2017-04
- 实施
This European Standard defines a method for the performance assessment of building-integrated cogeneration units by the calculation of the electricity production, useful heat output and recoverable losses. Such units are commonly known as micro or small scale cogeneration, or micro or small scale CHP. A building-integrated cogeneration, is a cogeneration unit installed to supply space heating, domestic hot water and possibly cooling within a building. It could operate as the only heating/cooling appliance of the building or in combination with other heat generators, such as boilers or electrical chillers. Unlike district heating systems, where heat and electricity are generated at central plants and transmitted through networks to a number of remote buildings, a building-integrated cogeneration unit produces useful heat for uses within the building. The electricity produced by the integrated cogeneration unit may be used within the building or may be exported. This standard deals with heat generators for heating or for combined domestic hot water and heating services. The calculation is based on the performance characteristics of the units, defined in product standards, and on operation conditions such the needed heat output. Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1.
Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-4: Heat generation systems@ building-integrated cogeneration systems@ Module M8-3-4@ M8-8-4@ M8-11-4
- ICS
- 91.140.10
- CCS
- P30
- 发布
- 2017-04
- 实施
This European Standard specifies procedures for assessment and verification of constancy of performance, marking and labelling of sealants for non-structural joints in building construction and pedestrian walkways.
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 5: Assessment and verification of constancy of performance@ marking and labelling
- ICS
- 91.100.50
- CCS
- P30
- 发布
- 2017-03
- 实施
This European Standard specifies definitions and requirements for non-structural facade sealants intended for sealing exterior wall joints, window and door perimeter joints in building construction, including the interior face. NOTE Provisions on assessment and verification of constancy of performance - AVCP (i.e. Product type determination and Factory Production Control) and marking of these products are given in EN 15651-5. This European Standard does not apply to non-structural sealants in any of non-paste form, to those used in interior walls and/or partitions and to oil-based mastics.
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements
- ICS
- 91.100.50
- CCS
- P30
- 发布
- 2017-02
- 实施
This European Standard specifies definitions and requirements for non-structural elastic sealants used for sealing glazing in building construction applications. It covers glazing joints from 7° horizontal. Main areas of application are: - glass to glass; - glass to frame; - glass to porous substrates. Excluding aquariums, structural bonding/glazing, inner and outer seal to manufacture insulated glazing units, horizontal glazing (below 7°), organic glass (e. g. polycarbonate, PMMA, etc.). NOTE Provisions on assessment and verification of constancy of performance - AVCP (i.e. Product type determination and Factory Production Control) and marking of these products are given in EN 15651-5.
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing
- ICS
- 91.100.50
- CCS
- P30
- 发布
- 2017-02
- 实施
This European Standard specifies definitions and requirements for sealants used for sealing of joints applied in sanitary areas in the interior of buildings exposed to non-pressurized water. It covers joints in: - bathrooms; - toilets; - showers; - domestic kitchens; - prefabricated elements in sanitary areas (e. g. shower cubicles). Industrial, drinking water, underwater (swimming pools, sewage systems, etc.), food contact applications and sealing of glass-ceramic cooktop panels (stove tops, ceramic hobs) are excluded from the scope. This European Standard does not provide criteria or recommendations for the design of joints and installation of sealants in sanitary applications. NOTE Provisions on assessment and verification of constancy of performance - AVCP (i.e. Product type determination and Factory Production Control) and marking of these products are given in EN 15651-5. This European Standard does not apply to non-structural sealants in any of non-paste form, to those used in sanitary joints and to oil-based mastics.
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints
- ICS
- 91.100.50
- CCS
- P30
- 发布
- 2017-02
- 实施
This European Standard specifies the laboratory test methods and test requirements for aerodynamic, energy rating and acoustic performance, of multifunctional balanced units intended for use in a single dwelling. In the case of units consisting of several parts, this standard applies only to those designed and supplied as a complete package with the mount instructions. It covers units that contain at least, within one or more casing:- supply and exhaust air fans; - air filters; - common control system; and one or more of the additional components; - air to water heat pump; - air to air heat pump; - air-to-air heat exchanger. Units including only an air to air heat exchanger and/or an exhaust air to supply air heat pump are covered by EN 13141-7. A non-exhaustive list of possible configurations of multifunctional units covered by this standard is given in Clause 5. The standard does not cover the thermal aspects of humidity transfer in the air-to-air heat exchanger. This standard does not deal with non-ducted units on supply and extract air side. This standard does not deal with collective units (centralized or semi-centralized systems) These multifunctional balanced units can be connected to ground heat exchanger for air preheating, solar collector or other heating systems. This standard does not cover the testing with these additional components. This standard does not cover units including combustion engine driven compression heat pumps and sorption heat pump.
Ventilation for Buildings - Performance testing of components for residential buildings - Multifunctional balanced ventilation units for single family dwellings@ including heat pumps
- ICS
- 91.140.30
- CCS
- P30
- 发布
- 2017-02
- 实施
This European Standard covers the assessment and verification of constancy of performance and the factory production control of basic alumino silicate glass products for use in buildings. NOTE For glass products with electrical wiring or connections for, e. g. alarm or heating purposes, other directives, e. g. Low Voltage Directive, may apply.
Glass in Building - Basic alumino silicate glass products - Part 2: Product standard
- ICS
- 81.040.20
- CCS
- P30
- 发布
- 2017-02
- 实施
This European Standard specifies definitions and requirements for cold applied non-structural elastic sealants used for movement joints in floors in building construction for interior and exterior use. Areas of application are: floor joints designed for pedestrian walkways, public areas, movement joints between concrete slabs, areas with pedestrian load, areas used with trolleys, walkable floors, balconies, terraces, warehouses. NOTE Provisions on assessment and verification of constancy of performance - AVCP (i.e. Product type determination and Factory Production Control) and marking of these products are given in EN 15651-5. Chemical containment, cold applied joint sealants for concrete pavements to be used in roads, airfields and sewage treatment plants, perimeter seals and seals in wood floors are excluded. This European Standard does not apply to non-structural sealants in any of non-paste form, to those used in pedestrian walkways.
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways
- ICS
- 91.100.50
- CCS
- P30
- 发布
- 2017-02
- 实施
This European Standard specifies the requirements for thermoplastic jackets for insulation products for building equipment and industrial installations and the test methods to be used. The European Standard does not apply to systems in which the jackets have already been securely fixed over the whole surface of an insulating material in situ.
Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods
- ICS
- 83.140.99
- CCS
- P30
- 发布
- 2016-11
- 实施
This European Standard specifies the equipment and procedures for determining the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS) delivered as a kit and used as thermal insulation for buildings.
Thermal insulation products for building applications - Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS)
- ICS
- 91.100.60
- CCS
- P30
- 发布
- 2016-10
- 实施
This European Standard specifies equipment and procedures for determining the pull-through resistance of plate anchors through thermal insulation products.
Thermal insulation products for building applications - Determination of the pull-through resistance of plate anchors through thermal insulation products
- ICS
- 91.100.60
- CCS
- P30
- 发布
- 2016-10
- 实施
Code for Acceptance of Green Building Projects
- ICS
- 91.040.01
- CCS
- P30
- 发布
- 2015-12-30
- 实施
- 2016-04-01
Green Building Evaluation Standards
- ICS
- 91.040.01
- CCS
- P30
- 发布
- 2015-12-30
- 实施
- 2016-04-01
Sealing and glazing - Terms and definitions
- ICS
- 01.040.91;91.100.50
- CCS
- P30
- 发布
- 2015-12
- 实施
This European Standard specifies performance requirements and design methods for temporary roofs and encapsulations. It is possible to form the constructions in several ways:- temporary roof which is supported by an existing permanent construction; - temporary roof which is supported by a scaffold; - temporary roof which is supported by another temporary construction (e. g. steel frame); - temporary wall which is supported by a separate construction; - encapsulation which is a complete temporary construction including roof, walls and corresponding temporary supports. This European Standard sets out general requirements. These are substantially independent of the materials of which the construction is made. This standard is intended to be used as the basis for enquiry and design.
Temporary works equipment - Encapsulation constructions - Performance requirements and general design
- ICS
- 91.120.01;91.200
- CCS
- P30
- 发布
- 2015-12
- 实施
Design, Construction and Acceptance of Small Generator Room of Tobacco Commercial System
- ICS
- 91.140.50
- CCS
- P30
- 发布
- 2015-10-23
- 实施
- 2015-12-20
Design, construction and acceptance of small power distribution room for tobacco business system
- ICS
- 91.140.50
- CCS
- P30
- 发布
- 2015-10-23
- 实施
- 2015-12-20
Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
- ICS
- 91.010.30
- CCS
- P30
- 发布
- 2015-09
- 实施
Modular coordination in building construction
- ICS
- 91.010.30
- CCS
- P30
- 发布
- 2015-09
- 实施
