P30 工业与民用建筑工程综合 标准查询与下载

DB21/T 1823-2010 既有居住建筑节能改造技术规程

Technical regulations for energy-saving renovation of existing residential buildings

DB21/T 1824-2010 既有公共建筑节能改造技术规程

Technical regulations for energy-saving renovation of existing public buildings

ISO 21931-1:2010 房屋建筑的可持续性.建筑工程的环境性能的评价方法用结构.第1部分:建筑物

This part of ISO 21931 provides a general framework for improving the quality and comparability of methods for assessing the environmental performance of buildings and their related external works. It identifies and describes issues to be taken into account in the development and use of methods of assessment of the environmental performance for new or existing buildings related to their design, construction, operation, maintenance and refurbishment, and in the deconstruction stages. The object of assessment in this part of ISO 21931 is the building and the external works within its site (curtilage). This part of ISO 21931 is intended to be used in conjunction with, and following the principles set out in the “ISO 14020 family of International Standards”, which includes ISO 14020, ISO 14021, ISO 14024 and ISO 14025, as well as ISO 14040 and ISO 15392. Where deviation occurs, this part of ISO 21931 takes precedence. This part of ISO 21931 deals only with methods of assessment of environmental performance and excludes methods of assessment of social and economic performance, which are also part of sustainability and sustainable development.

Sustainability in building construction - Framework for methods of assessment of the environmental performance of construction works - Part 1: Buildings

ISO 15686-10:2010 房屋和建筑资产.使用寿命计划.第10部分:何时评价试验性能

This part of ISO 15686 establishes when to specify or verify functional performance requirements during the service life of buildings and building-related facilities, and when to check the capability of buildings and facilities to meet identified requirements.1) This part of ISO 15686 is applicable to any scope of holdings, whether a set (or portfolio) of buildings, a single building (large or small) or a facility which is part of a building (such as one group of spaces, one floor or several floors). It is applicable to the range of roles of stakeholders, from the owners and managers to the occupants, tenants or other users. It is intended to be used with ISO 15686-1, ISO 15686-2, ISO 15686-3, ISO 15686-5, ISO 15686-6, ISO 15686-7, ISO 15686-8 and ISO 15686-9.

Buildings and constructed assets - Service life planning - Part 10: When to assess functional performance

SANS 16818:2010 建筑物环境设计．能效．术语

Gives terms and definitions for use in the design of energy-efficient buildings. Applies to new buildings and retrofitted buildings.

Building environment design - Energy efficiency - Terminology

BS DD ISO/TS 15686-9:2010 建筑和建筑物资产.工作寿命期限规划.工作寿命数据评定指南

Buildings and constructed assets - Service-life planning - Guidance on assessment of service life data

ASTM F2409-10 非家居室外游泳池、热水浴缸以及温泉浴场用栏栅的标准指南

This guide sets forth minimum standard requirements for use in local codes and ordinances relating to non-residential outdoor swimming pools, hot tubs, spas, and waters. This guide does not have the effect of law, nor is it intended to supersede local codes and ordinances of a more restrictive nature.1.1 This guide provides recommended minimum requirements for various types of fences for non-residential outdoor swimming pools, hot tubs and spas. 1.2 The various types of fences may be chain link, wood, vinyl, ornamental steel or aluminum, welded wire, expanded metal, composite or others that would be incorporated into a design necessary to support the structure considering its height, application, location, and climatic condition. All types of fences shall be in accordance with ASTM standards. 1.3 Units8212;The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The SI values stated in parentheses are provided for information purposes only.

Standard Guide for Fences for Non-Residential Outdoor Swimming Pools, Hot Tubs, and Spas

JGJ/T 188-2009 施工现场临时建筑物技术规范　

本规范适用于房屋建筑工程和市政公用工程施工现场临时建筑物的设计、施工安装、验收、使用与维护、拆除与回收。

Technical code of temporary building of construction site

KS F ISO 13784-1:2009 夹层板建筑系统对火反应的试验.第1部分:小室试验方法

이 표준은 실제와 유사하게 시공된 한 개의 장방형 소규모실의 샌드위치 패널구조물에 대한 화

Reaction-to-fire tests for sandwich panel building systems－Part 1：Test method for small rooms

ISO 15928-3:2009 房屋.性能描述.第3部分:结构耐久性

Houses - Description of performance - Part 3: Structural durability

KS R ISO 3888-1:2008 客车.剧烈车道转换机动的测试轨迹.第1部分:双车道转换

이 표준은 차량 동역학과 도로 접지 능력의 일부를 구성하는 이중 차선 변경 주행 성능을 주

Passenger cars-Test track for a severe lane-change manoeuvre-Part 1:Double lane-change

DIN 18012:2008 家用连接设施.规划原则

House service connections facilities - Pinciples for planning

DB52/T 537-2008 防雷装置安全检测标准规范

本标准规定了防雷装置的检测项目,检测要求,检测周期,检测程序,检测数据处理和检测安全规定.

Standard Specification for Safety Testing of Lightning Protection Devices

KS F ISO 6707-1:2007 城市建筑设计.通用术语

이 규격은 건축 및 토목 공사에 적용되는 일반 용어를 규정한다. 이 규격에 포함되는 용어에

Building and civil engineering－Vocabulary－General terms

CECS 226-2007 栓钉焊接技术规程

本规程适用于工业与民用建筑工程的组合结构中采用拉弧式栓钉焊接方法或电弧焊焊接方法焊接的栓钉焊接质量控制及验收。

Technical pecification for welding of stud

ISO/PAS 22539:2007 ISO15928用户指南-房屋-性能说明

This Publicly Available Specification provides user guidance to ISO 15928, which provides the framework within which performance specifications for houses can be developed. The ISO 15928 series is confined to buildings occupied for residential purposes which may be separated or linked horizontally, but not linked vertically, which have their own access and do not share any common space.

User guidance to ISO 15928 - Houses - Description of performance

CSA Z782-06 UPD 1-2007 建筑拆除整平设计指南.第1版

This Standard can be applied to any defined forest area (DFA). The boxed text prescribes the specific SFM requirements for public participation, performance, and systems. The text located outside the boxes is intended to clarify the specifications set o

Guideline for design for disassembly and adaptability in buildings First Edition

CSA S413-07-CAN/CSA-2007 停车结构建筑.第3版

Canadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve co

Parking Structures Third Edition

DIN CEN/TS 15379:2007 建筑管理.设备术语和使用范围

The standard defined the code of practice apply for services relating to the management of buildings and properties. The definitions are intended to serve the unification of the various terms hitherto used and the associated services with the aim of creating more transparency on the market.

Building management - Terminology and scope of services; German version CEN/TS 15379:2006

ASHRAE 90.1 I-P INT 8-2007 低层住宅除外的建筑物的能源标准

Energy Standard for Buildings Except Low-Rise Residential Buildings I-P Edition; Replaces Errata 03/29/2007 [Refer To: ASHRAE 90.1 USER鈥橲 MANUAL]

Energy Standard for Buildings Except Low-Rise Residential Buildings I-P Edition; Replaces Errata 03/29/2007 [Refer To: ASHRAE 90.1 USER鈥橲 MANUAL]