Q20 筑路材料 标准查询与下载

ASTM D3666-07 试剂试验、检验道路和铺路材料用最低要求的标准规范

1.1 This specification covers the minimum requirements for field and laboratory personnel, for establishing and maintaining a quality system, and establishes minimum qualifications for agencies engaged in the testing and inspection of road and paving materials.1.2 Criteria are provided for evaluating the capability of an agency to properly perform designated tests on road and paving materials, and for establishing guidelines pertaining to an agency''s organization, personnel, facilities, and quality system. This specification may be supplemented by more specific criteria, such as that in Specification E 329, and requirements for particular projects.1.3 This specification can be used as a basis to evaluate testing or inspection agencies, or both, and is intended for use for the qualifying or accrediting, or both, of testing or inspection agencies, public or private, engaged in the testing and inspection of road and paving materials.1.4 Accreditation is required to comply with this standard. (See 8.1.5.)1.5 The users of the accredited agency must review the agency''s scope of accreditation to ensure the agency has been accredited for its technical competence to perform the tasks requested by the user.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials

ASTM C1097-07 沥青水泥或沥青人行道用熟石灰的标准规范

1.1 This specification covers high calcium, dolomitic and magnesian-hydrated lime for use in asphalt cement or bituminous pavement.Note 1Hydrated lime, either calcitic, dolomitic, or magnesian, improves bonding of bitumen and aggregates which reduces susceptibility to moisture damage, reduces age hardening by chemically stabilizing polar compounds found in asphalts, and increases initial stiffness of asphalt mixtures.Note 2No attempt is made to present requirements for any by-product lime.This standard does not purport to address the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Pavements

ASTM C1353-07 行人交通用规格石料的耐磨损性用泰伯磨损机的标准试验方法

1.1 This test method covers the establishment of an index of abrasion resistance by determination of loss of weight resulting from abrasion of dimension stone as described in Terminology C 119 and is modeled after Test Method C 501. 1.2 The values stated in metric units are to be regarded as the standard. 1.3 This test method makes use of a Taber abraser machine to determine the weight loss of dimension stone under controlled conditions.1.4 This test method is useful in indicating the differences in abrasion resistance between the various dimension stones. This test method provides one element in comparing stones of the same type. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic

ASTM C1272-07 供重型车辆通过的路面砖的标准规范

1.1 This specification covers brick intended for use as a paving material in areas with a high volume of heavy vehicular traffic. The units are designed for use in such places as streets, commercial driveways, and aircraft taxiways. These units are not intended for applications covered by Specifications C 410 or C 902.1.2 Units are manufactured from clay, shale, or similar naturally occurring earthy substances and subjected to a heat treatment at elevated temperatures (firing). The heat treatment must develop sufficient fired bond between the particulate constituents to provide the strength and durability requirements of this specification (see firing, fired bond, and incipient fusion in Terminology C 43).1.3 Brick may be shaped during manufacture by extruding, molding, or pressing. Brick may have spacing lugs, chamfered edges, or both. 1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Heavy Vehicular Paving Brick

ASTM C902-07 人行道和轻型车道铺地砖用标准规范

1.1 This specification covers brick intended for use as paving material subjected to pedestrian and light vehicular traffic. The units are designed for use in pedestrian applications and vehicular areas that are subjected to low volumes of vehicular traffic, such as residential driveways and streets and commercial driveways (passenger drop-offs). The units are not intended to support heavy vehicular traffic covered by Specification C 1272 or for industrial applications covered by Specification C 410. Heavy vehicular traffic is defined as high volumes of heavy vehicles (trucks having 3 or more axles) in Specification C 1272.1.2 The property requirements of this specification apply at the time of purchase. The use of results from testing of brick extracted from masonry structures for determining conformance or nonconformance to the property requirements (Section 4) of this specification is beyond the scope of this specification.1.3 Brick are manufactured from clay, shale, or similar naturally occurring earthy substances and subjected to a heat treatment at elevated temperatures (firing). The heat treatment must develop sufficient fired bond between the particulate constituents to provide the strength and durability requirement of this specification (see firing, fired bond, and incipient fusion in Terminology C 43).1.4 The brick are available in a variety of sizes, colors, and shapes. They are available in three classes according to exposure environment and three types according to type of traffic exposure.1.5 The values stated in inch-pound units are to be regarded as the standard.

Standard Specification for Pedestrian and Light Traffic Paving Brick

ASTM D3666-07e1 试剂试验、检验道路和铺路材料用最低要求的标准规范

1.1 This specification covers the minimum requirements for field and laboratory personnel, for establishing and maintaining a quality system, and establishes minimum qualifications for agencies engaged in the testing and inspection of road and paving materials.1.2 Criteria are provided for evaluating the capability of an agency to properly perform designated tests on road and paving materials, and for establishing guidelines pertaining to an agency''s organization, personnel, facilities, and quality system. This specification may be supplemented by more specific criteria, such as that in Specification E 329, and requirements for particular projects.1.3 This specification can be used as a basis to evaluate testing or inspection agencies, or both, and is intended for use for the qualifying or accrediting, or both, of testing or inspection agencies, public or private, engaged in the testing and inspection of road and paving materials.1.4 Accreditation is required to comply with this standard. (See 8.1.5.)1.5 The users of the accredited agency must review the agency''s scope of accreditation to ensure the agency has been accredited for its technical competence to perform the tasks requested by the user.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials

NF P98-887-14:2006 液力粘合的混合料.规范.第14部分:飞灰土壤混合料

Hydraulically bound mixtures - Specifications - Part 14 : soil treated by fly ash.

NF P98-887-12:2006 液压粘结混合料.规范.第12部分:熔渣处理的土壤

Hydraulically bound mixtures - Specifications - Part 12 : soil treated by slag.

NF P98-887-13:2006 液压粘结混合料.规范.第13部分:液压道路粘结剂处理的土壤

Hydraulically bound mixtures - Specifications - Part 13 : soil treated by hydraulic road binder.

NF P98-887-10:2006 液压粘合混合料.规范.第10部分:水泥土壤混合料

Hydraulically bound mixtures - Specifications - Part 10 : soil treated by cement.

NF T65-007:2006 沥青和沥青粘合剂.硬石铺路级沥青规范

Bitumen and bituminous binders - Specifications for hard paving grade bitumens.

NF P98-819-2*NF EN 13108-2:2006 沥青混合料.材料规范.第2部分:极薄沥青混凝土层

Bituminous mixtures - Material specifications - Part 2 : asphalt concrete for very thin layers.

NF P98-887-11:2006 液压粘合的混合料.规范.第11部分:石灰土混合料

Hydraulically bound mixtures - Specifications - Part 11 : soil treated by lime.

BS 7533-12:2006 用粘土、天然石头或混凝土铺筑材料建造的路面.使用混凝土铺路薄片石和天然石板在结合式基层上建造通行路面的结构设计指南

This part of BS 7533 provides guidance on the design of bound pavements surfaced with concrete paving flags manufactured in accordance with BS EN 1339 and natural stone slabs manufactured in accordance with BS EN 1341, both laid in accordance with BS 7533-4. It applies to all pavements including those subjected to commercial vehicular traffic travelling at speeds less than 50 kph with a design life of 40 years.

Pavements constructed with clay, natural stone or concrete pavers - Guide to the structural design of trafficked pavements constructed on a bound base using concrete paving flags and natural stone slabs

BS 7533-4:2006 用粘土、天然石或混凝土铺路材料建造的路面.预制混凝土板或天然石板路面建造的实施规程

This part of BS 7533 gives recommendations for laying precast concrete flags conforming to BS EN 1339 and natural stone slabs conforming to BS EN 1341 intended for use in the construction of carriageways, footways, pedestrian areas and pavements for rigid and flexible construction for the different application as given in Table 5 and designed in accordance with BS 7533-8 and BS 7533-12.

Pavements constructed with clay, natural stone or concrete pavers - Code of practice for the construction of pavements of precast concrete flags or natural stone slabs

DIN EN 1340 Corrigendum 1:2006 混凝土路缘石组合. 试验方法和要求; 英文版本DIN EN 1340: 2003-08勘误表

Concrete kerb units - Requirements and test methods Corrigendum 1 to English version of DIN EN 1340:2003-08

DIN EN 1338 Berichtigung 1:2006 混凝土铺路块料.要求和试验方法

Concrete paving blocks - Requirements and test methods; German version EN 1338:2003, Corrigenda to DIN EN 1338:2003-08; German version EN 1338:2003/AC:2006

DIN EN 1339 Berichtigung 1:2006 混凝土铺方石块.要求和试验方法

This standard specifies materials, properties, requirements and methods of testing for precast concrete flags and complementary fittings. This standard is applicable to precast concrete flags that are particularly for use in external paved trafficked areas.

Concrete paving flags - Requirements and test methods; German version EN 1339:2003, Corrigenda to DIN EN 1339:2003-08; German version EN 1339:2003/AC:2006

DIN EN 1340 Berichtigung 1:2006 混凝土路缘砖.要求和试验方法

Concrete kerb units; Requirements and test methods; German version EN 1340:2003, Corrigenda to DIN EN 1340:2003-08; German version EN 1340:2003/AC:2006

DIN EN 13108-1:2006 沥青混合物.材料规范.第1部分:沥青混凝土

Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete; English version of DIN EN 13108-1:2006-08