共找到 430 条与 金属构配件 相关的标准,共 29 页
本标准规定了建筑装饰用烤瓷铝板的术语和定义、分类和标记、一般要求、技术要求、试验方法、检验规则以及标志、包装、运输、贮存和随行文件。 本标准适用于工业与民用建筑内外装饰用烤瓷铝板。
Aluminium panels with ceramic coatings for building decoration
本标准规定了福建沿海地区金属屋面系统的术语和定义、订货内容、材料选用、原材料进场质量验收、加工制造、允许偏差、压型金属板检测方法及规则、包装、堆放、运输、标识及质量证明文件、安装要求、检测、维护与维修。 本标准适用于50年一遇的基本风压不小于0.6 kN/m2地区新建、改建和扩建的金属屋面系统。 本标准不适用于采用金属面夹芯板建造的金属屋面系统。
Technical conditions for metal roofs in coastal areas
现批准《建筑用遮阳金属百叶帘》为建筑工业行业产品标准,编号为JG/T251-2017,自2018年8月1日起实施。原《建筑用遮阳金属百叶帘》JG/T251-2009同时废止。 本标准在住房城乡建设部门户网站(www.mohurd.gov.cn)公开,并由我部标准定额研究所组织中国标准出版社出版发行。 中华人民共和国住房和城乡建设部 2017年12月22日
Architectural sunshade metal blinds
现批准《建筑门窗五金件 滑撑》为建筑工业行业产品标准,编号为 JG/T127-2017,自2018年8月1日起实施。原《建筑门窗五金件 滑撑》JG/T127-2007同时废止。 本标准在住房城乡建设部门户网站(www.mohurd.gov.cn)公开,并由我部标准定额研究所组织中国标准出版社出版发行。 中华人民共和国住房和城乡建设部 2017年12月22日
Building door and window hardware sliding stays
本标准规定了建筑门窗用插销的分类和标记、要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于建筑双扇平开门窗用插销。
Building hardware for windows and doors.Shoot bolts
现批准《建筑用不锈钢焊接管材》为建筑工业行业产品标准,编号为JG/T539-2017,自2018年8月1日起实施。原《建筑装饰用不锈钢焊接管材》JG/T3030-1995同时废止。 本标准在住房城乡建设部门户网站(www.mohurd.gov.cn)公开,并由我部标准定额研究所组织中国标准出版社出版发行。 中华人民共和国住房和城乡建设部 2017年12月22日
Stainless steel welded pipes for construction
现批准《建筑门窗五金件 撑挡》为建筑工业行业产品标准,编号为 JG/T128-2017,自2018年8月1日起实施。原《建筑门窗五金件 撑挡》JG/T128-2007同时废止。 本标准在住房城乡建设部门户网站(www.mohurd.gov.cn)公开,并由我部标准定额研究所组织中国标准出版社出版发行。 中华人民共和国住房和城乡建设部 2017年12月22日
Building door and window hardware supports
现批准《建筑门窗五金件 传动机构用执手》为建筑工业行业产品标准,编号为 JG/T124-2017,自2018年6月1日起实施。原《建筑门窗五金件 传动机构用执手》JG/T124-2007同时废止。 本标准在住房城乡建设部门户网站(www.mohurd.gov.cn)公开,并由我部标准定额研究所组织中国标准出版社出版发行。 中华人民共和国住房和城乡建设部 2017年12月7日
Handle for transmission mechanism of building door and window hardware
现批准《建筑门窗五金件 旋压执手》为建筑工业行业产品标准,编号为 JG/T213-2017,自2018年6月1日起实施。原《建筑门窗五金件 旋压执手》JG/T213-2007同时废止。 本标准在住房城乡建设部门户网站(www.mohurd.gov.cn)公开,并由我部标准定额研究所组织中国标准出版社出版发行。 中华人民共和国住房和城乡建设部 2017年12月7日
Architectural door and window hardware spinning handles
现批准《建筑门窗五金件 滑轮》为建筑工业行业产品标准,编号为 JG/T129-2017,自2018年6月1日起实施。原《建筑门窗五金件 滑轮》JG/T129-2007同时废止。 本标准在住房城乡建设部门户网站(www.mohurd.gov.cn)公开,并由我部标准定额研究所组织中国标准出版社出版发行。 中华人民共和国住房和城乡建设部 2017年12月7日
Construction door and window hardware pulleys
现批准《建筑门窗五金件 单点锁闭器》为建筑工业行业产品标准,编号为 JG/T130-2017,自2018年6月1日起实施。原《建筑门窗五金件 单点锁闭器》JG/T130-2007同时废止。 本标准在住房城乡建设部门户网站(www.mohurd.gov.cn)公开,并由我部标准定额研究所组织中国标准出版社出版发行。 中华人民共和国住房和城乡建设部 2017年12月7日
Building door and window hardware single point locks
现批准《建筑门窗五金件 传动锁闭器》为建筑工业行业产品标准,编号为 JG/T126-2017,自2018年6月1日起实施。原《建筑门窗五金件 传动锁闭器》JG/T126-2007同时废止。 本标准在住房城乡建设部门户网站(www.mohurd.gov.cn)公开,并由我部标准定额研究所组织中国标准出版社出版发行。 中华人民共和国住房和城乡建设部 2017年12月7日
Building door and window hardware transmission lock
Fences. Specification for open mesh steel panel
This European Standard specifies test methods and requirements for the strength and durability of tapered pressure tubes for self-supporting gas springs for the height adjustment of seating. Annex A (normative) contains product information. Annex B (informative) contains a guide for choosing the correct strength class.
Hardware for furniture - Tapered pressure tubes for selfsupporting gas springs for the height adjustment of seating - Test methods and requirements for strength and durability
Building door and window hardware hinges (hinges)
1.1 This specification covers cold-formed steel structural framing members (with a base steel thickness of not less than 0.0329 in. (0.836 mm)) in load-bearing (transverse and axial) construction assemblies. Steel of lesser thickness shall be permitted in additional engineered products. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Cold-Formed Steel Structural Framing Members
本标准规定了承插型盘扣式钢管支架构件的术语和定义、分类和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于工业与民用建筑工程中使用的承插型盘扣式钢管支架构件的生产和检验。也可用于市政、水利、交通、化工、航天、煤炭、船舶和文体等工程中使用的承插型盘扣式钢管支架构件的生产和检验。
Disk lock steel tubular scaffold components
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号