S80 牵引供电综合 标准查询与下载

TB 10208-1998（条文说明） 铁路电力牵引供电施工规范

Code for construction of railway electric eaction feeding

TB/T 2963-1999 牵引动力单元标记和图形符号

本标准适用于为国际铁路联盟所有成员路制造的机车、动车和动车组。对国际联运及国内运行的机车、动车和动车组也可参照执行。

Traction power unit markings and graphic symbols

TB 10008-1999 铁路电力设计规范

Code for design of railway electric power

TB 10207-1999 铁路电力施工规范

Code for construction of railway electric power

DIN V ENV 50152-3-1:1999 轨道交通.固定设备.交流开关设备特殊要求.第3部分:交流牵引设备专用测量、控制和保护装置.第1节:使用指南

Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3: Measurement, control and protection devices for specific use in a.c. traction systems; Section 1: Application guide; German version ENV 50152-3-1:1998

DIN V ENV 50123-7-1:1999 轨道交通.固定设施.直流转换开关装置.第7部分:直流牵引系统专用的测量、控制和保护装置.第1节:应用指南

Railway applications - Fixed installations - D.C. switchgear - Part 7: Measurement, control and protection devices for specific use in d.c. traction systems; Section 1: Application guide; German version ENV 50123-7-1:1998

UL 2202-1998 电力车辆充电系统设备

The following items are subject to comment: 1.) Deleting the term "natural" from "natural gray" throughout the standard. 2.) Allowing the length of electrical supply equipment cable to exceed 25 feet where applicable. 3.) Deleting the term "No." in "No. X AWG" throughout the stanard.

Electric vehicle (EV) charging system equipment

TB 10117-1998 铁路电力牵引供电远动系统技术规范

Technical code for traction feeding telecontrol project

TB 10208-1998 铁路电力牵引供电施工规范

Code for construction of railway electric traction feeding

BS EN 61377:1997 电力牵引.铁路车辆.反向供电交流电动机及其控制的联合检验

This International Standard applies to the combinations of motor(s), inverter and their control, and its object is to specify: - the performance characteristics of electric drives consisting of an inverter, alternating current motors, and the related control system; - methods of verifying these performance characteristics by tests. Two categories of combined systems can be considered: 1) Motors fed from an inverter without any control between the mechanical output (torque, speed) and the inverter (mostly auxiliary motors, for example cooling fan motors). The motor works exactly as if it were fed from a busbar (at variable frequency and voltage or not). 2) Motor(s) (paralleled or not) with a control between the mechanical output and the inverter. The first category of systems is tested according to IEC 349-2 and IEC 1287-1. This standard applies to the second category, mainly traction drives. IEC 349-2 applies to convertor-fed alternating current motors, IEC 1287-1 to power electronic convenors; parts 1, 2 and 3 of IEC 571 apply to electronic equipments, this standard applies to the combination of motor(s), inverter, and their control. As a consequence, IEC 349-2 describes the tests to demonstrate the compliance of the motor to its specification, IEC 1287-1 does the same for the inverter. It is self-evident that some of the tests mentioned in this standard generally may replace the corresponding ones described in the above mentioned standards. An agreement should be reached between the parties to avoid the duplication of tests. At the time of drafting this standard, only the following combinations of motors and inverters have been used for traction applications, but it may also apply to other combinations which may be used in the future: - asynchronous motors fed by voltage source inverter; - asynchronous motors fed by current source inverter; - synchronous motors fed by current source inverter. The d.c. source can be a supply line, a rectifier, a chopper, an input convenor, a diesel generator with integrated rectifiers, etc.

Electric traction - Rolling stock - Combined testing of inverter-fed alternating current motors and their control

TB/T 2852-1997 轨道电路通用技术条件

General technical conditions for track circuits

TB/T 2853-1997 25Hz相敏轨道电路技术条件

25Hz phase sensitive track circuit technical conditions

IEC TR3 61374:1997 牵引供电系统中的过电压

This technical report establishes useful information concerning transient overvoltages in electrical traction supply systems. The information contained in this report was complied from the circulation of a questionnaire. It is hoped that this report will help progress the work being carried out in the area of overvoltages. Comments of the content of this report should be sent to IEC central office.

Overvoltages in traction supply systems

TB/T 1652-1996 牵引供电系统电压损失的计算条件和方法

Calculation Conditions and Methods of Voltage Loss in Traction Power Supply System

TB/T 1653-1996 牵引供电系统电能损失的计算条件和方法

Calculation Conditions and Methods of Electric Energy Loss in Traction Power Supply System

DIN EN 50163:1996 轨道交通.铁路电网馈电电压

Railway applications - Supply voltages of traction systems; German version EN 50163:1995

IEC 61377:1996 电力牵引 机车车辆 逆变器供电的交流电动机及其控制的联合试验

Deals with the combinations of motor(s), inverter and their control. Specifies the performance characteristics of electric drives consisting of an inverter, alternating current motor(s), and the related control system, and methods of verifying these perf

Electric traction - Rolling stock - Combined testing of inverter-fed alternating current motors and their control

TB/T 10043-1995 交流电气化铁路对有线广播线路干扰防护设计规范

Design specification for protection against interference of AC electrified railways to cable broadcasting lines

IEC TR2 60349-3:1995 电力牵引 铁路和道路车辆用旋转电机 第3部分:用组件损耗总和确定变流器供电的交流电动机的总损耗

This technical reporrt applies to machines complying with IEC 349-2. Describes the determination of total losses of a convertor-fed motor by summation of the component losses derived by no-load and load tests.

Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of convertor-fed alternating current motors by summation of the component losses

JIS E 2001:1994 架空接触线.配件.词汇

Overhead contact lines -- Fittings-vocabulary